INSTRUCTIONS FOR USE Pro-Ject Tuner Box
Dear music lover, thank you for purchasing a PRO-JECT AUDIO FM-tuner. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. Connectors FM Ant. 75 Ohm Unbal. ! Make all connections whilst the tuner is disconnected from the power supply. ! Take care to connect the left and right channels correctly.
Using the Pro-Ject Tuner Box Tuning Tune Level 87.90 MANUAL Tuner Box MHz Push ON/OFF Turning on/off Press the Tuning to switch the tuner on. Press and hold the same button for a few seconds to switch the tuner off. If the Tuner Box is connected to the remote switch-on facility of a Pro-Ject pre amplifier, then choosing input 1 at the pre amplifier will switch the tuner on. Selecting a different input will switch the tuner off.
Technical specifications Pro-Ject Tuner Box Tuning range FM-band: Programmable presets: Frequency response: S/N ratio: THD: Stereo separation: Sensitivity: Antenna input: Line-level output: Trigger: Trigger in and out: Output voltage: Outboard power supply: Power consumption: Dimensions W x H x D (D with sockets): Weight: 87,5 - 108,5MHz (50kHz steps) 8 20Hz - 20kHz (±1dB) 50dB 0,05% / ∆f 75kHz and f mod 1kHz 30dB / ∆f 75kHz and f mod 1kHz 7dB/µV mono, 17dB/µV stereo /75 ohms 1 x co-axial DIN-socket (75 oh
