INSTRUCTIONS FOR USE Pro-Ject Phono Box USB
Dear music lover, thank you for purchasing a PRO-JECT AUDIO phono amplifier. In order to achieve maximum performance and reliability you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice.
Connecting to a Computer Connect the USB-output of the unit to a free USB-socket on your computer and turn it on/make sure it is powered on. The “new hardware found assistant“ will automatically detect the unit and announces it as a Microphone USB audio codec. There is no need to install a driver manually. After installation, one setting has to be done.
Technical specifications Pro-Ject Phono Box USB A Typical for low output MC cartridges, B typical for MM or high output MC cartridges Input capacitance/input impedance, MC: 100ohms/120pF A Input capacitance/input impedance, MM: 47kohms/120pF B Gain, MM: 40dB Output voltage typically: 300mV/1kHz at 3mV/1kHz (MM input) Gain, MC: 60dB Output voltage typically: 300mV/1kHz at 0,3mV/1kHz (MC input) Max.
