INSTRUCTIONS FOR USE Pro-Ject Elemental/Phono USB
Controls, features and connections 1 Power switch 2/22 Stepped drive pulley and drive belt * 3 Platter with felt mat * 4 Tonearm counterweight 5 Tonearm lift lever 6/66 Tonearm rest and removable transport lock 7 Tonearm tube 8 Headshell with finger lift and fitted Ortofon OM 5E cartridge 9 Phono output sockets, earth connection and USB-out 10 Power supply socket Power supply (not shown)* Signal output and USB-cable (not shown)* Two hexagonal keys (not shown)* 2 © Pro-Ject Audio Systems
Pro-Ject Elemental/Phono USB Dear music lover, thank you for purchasing a PRO-JECT AUDIO record player. In order to achieve maximum performance and reliability with this record player you should study these instructions for use carefully. ! Warning of a hazard for the user, the unit or possible misuse. Important notice. ** Your turntable has been delivered with a factory fitted and adjusted cartridge, please ignore the cartridge set up instructions unless changing the cartridge at a later date.
Connection to the amplifier The record player has a captive tonearm signal lead (9) for connection to the amplifier. Use the Phono input (sometimes labelled gram, disc or RIAA) on your amplifier. Make sure that the phono input offers correct matching and amplification for the type of cartridge used. Line inputs (such as CD, Tuner, Tape or Video) are not suitable. Take care to connect the left and right channels correctly. The right channel is usually marked red, the left channel black or white.
Maintenance and cleaning Your record player requires little or no regular maintenance. Remove dust with a slightly moistened antistatic cloth. Never use a dry cloth because this will create static electricity which attract more dust! Antistatic cleaning fluids are available at specialist stores but must be applied sparingly to avoid damage to rubber parts. It is recommended to fit the needle cover before cleaning or maintenance is carried out to avoid damage.
Technical specifications Pro-Ject Elemental / Pro-Ject 8.6 Nominal speeds Speed variance Wow and flutter Signal to noise Effective tonearm mass Effective tonearm length Overhang Power consumption Outboard power supply Dimensions (W x H x D) Weight 33/45 r.p.m.
Potential incorrect use and fault conditions Pro-Ject turntables are manufactured to the highest standards and undergo strict quality controls before leaving the factory. Faults that may possibly occur are not necessarily due to material or production faults but can sometimes be caused by incorrect use or unfortunate circumstances. Therefore the following list of common fault symptoms is included. The platter doesn't turn although the unit is switched on: The unit is not connected to the mains power supply.
© Pro-Ject Audio Systems· Pro-Ject Elemental Phono USB/ Pro 8.6UP / Ortofon OM 5E · Revision 2013.9.