BPID™ LR Security Device USER MANUAL AND LICENSING AGREEMENT www.privaris.
Privaris BPID™ LR Security Device Congratulations on receiving your new BPID™ LR Security Device. Record your device’s unique address here: __ : __ __ : __ __ : __ __ : __ __ : __ __: __ __ The device address is found on the back of your device. It is an 11 character string of letters and numbers separated by colons. For optimal results and convenience using your device, it is important that you read this manual.
Privaris BPID™ LR Security Device 1. WHAT IS A BPID™ SECURITY DEVICE? 3 OVERVIEW DEVICE DIAGRAM APPLICATIONS 3 3 4 2. 5 USAGE INSTRUCTIONS STEP 1: ACTIVATION STEP 2: USING YOUR DEVICE 5 5 BATTERY REPLACEMENT 7 BATTERY LEVEL INDICATORS CHANGING THE BATTERY 7 7 3. SECURITY & PERSONAL PRIVACY 8 4. HOW IT WORKS 9 ENROLLMENT VERIFICATION TRANSMISSION 9 9 9 T 5. GENERAL TROUBLESHOOTING 10 6. FACILITY & GATE ACCESS TROUBLESHOOTING 13 7. FREQUENTLY ASKED QUESTIONS 14 8.
Privaris BPID™ LR Security Device 1. WHAT IS A BPID™ SECURITY DEVICE? Overview A BPID™ Security Device is a wireless, biometric personal identification device that provides identity verification using fingerprint biometrics. Because no two fingerprints are identical, biometric verification significantly heightens security levels by ensuring that the intended and authorized user of the device is the only person for whom the device will function.
Privaris BPID™ LR Security Device The BPID™ Security Device’s design is simple and user-friendly. The device has four components: Lights: A green, yellow and red light help to prompt the user through device operation and communicate to the user what mode the device is in. Power Button: Turns the device on and off Fingerprint Sensor: Scans a user’s fingerprint and either grants or denies access to a particular resource. Battery Compartment: Located under a sliding cover.
Privaris BPID™ LR Security Device 2. USAGE INSTRUCTIONS Step 1: Activation In order to activate a BPID™ Security Device you must be enrolled in the device. Enrollment is the device issuance process and is typically managed by an organization’s issuing authority, such as the Information Technology Department, Security Office, or Human Resources Department. Enrollment initializes the device and “marries” it to its owner.
Privaris BPID™ LR Security Device 8. Press the power button to turn off the device. If you forget, it will power off automatically after approximately 10 seconds. FACILTIY ACCESS: VEHICLE GATES 1. Open the device’s clear plastic flip-cover. 2. Click the round gray Power Button once. -A blinking yellow light will indicate that the device is on and is awaiting a finger. 3.
Privaris BPID™ LR Security Device BATTERY REPLACEMENT The BPID™ Security Device is powered by a CR2 lithium battery, the same type of battery used in many cameras. A replacement battery can be purchased at most camera stores, drug stores, or supermarkets. Battery Level Indicators Low Battery Indicator: A quick flashing red light upon start-up at the same time the yellow light comes on.
Privaris BPID™ LR Security Device 3. SECURITY & PERSONAL PRIVACY Key points related to the security of the BPID™ device and the user’s personal privacy: All fingerprint processing is done within the device, so fingerprints do not have to be stored in any type of database, thereby protecting the user’s personal privacy. The fingerprint is used only for identity verification. Neither the fingerprint nor its features are ever physically transmitted nor ever leave the device.
Privaris BPID™ LR Security Device 4. HOW IT WORKS The BPIDTM Security Device has three functions: enrollment, verification, and transmission. Enrollment Enrollment is the device activation and issuance process and generally occurs only once. It is what assigns or “marries” the device to its user. During enrollment, numeric representations of the unique features of a fingerprint (i.e. the ridges, valleys and whorls) are encoded and securely stored on the BPIDTM device.
Privaris BPID™ LR Security Device 5. GENERAL TROUBLESHOOTING PROBLEM Difficulty verifying. Getting solid red light instead of a solid green light. Try the following, in order, until capture speed increases or a green light appears: Make sure you are using a finger that was enrolled. Wipe-off any excess dirt or grease from finger. Wipe-off the sensor with a clean finger, swiping it down the sensor twice to clean it.
Privaris BPID™ LR Security Device PROBLEM Device will not power on. 1. Open battery compartment by inserting tip of pen into the battery release (see Figure 2). 2. Remove cover. 3. Remove battery. 4. Put the same battery back, making sure that it is secured tightly and properly aligned. It should be touching the battery contacts on the top and bottom of the compartment, and the positive (+) end should be pointing toward the tip of the device. 5.
Privaris BPID™ LR Security Device PROBLEM The device is blinking green instead of blinking yellow.. If the device is blinking green it is enrollment mode and is ready to for an Enrollment Admnistrator to enroll a user in the device or to modify a configuration setting on the device. For the device to be in enrollment mode, the power button has to be held down for approximately three (3) seconds.
Privaris BPID™ LR Security Device 6. FACILITY & GATE ACCESS TROUBLESHOOTING PROBLEM Seeing a green light and successfully verifying, but not being granted access to a doorway:. 1. After a successful verification, with the green light lit, take your device and physically touch the tip of it to the reader at the facility access point. Try touching different points on the reader. 2. If still not working, try verifying again, but take the device to a reader at a different facility access point and try again.
Privaris BPID™ LR Security Device 7. FREQUENTLY ASKED QUESTIONS How do I turn on my device? Press and quickly release the round gray Power Button located on the front of the device. One click will ready the device for gate or doorway access. How do I know when my device is ready for verification? A blinking yellow light indicates that the device is ready to accept a finger for verification. For facility access this occurs after you turn on your device.
Privaris BPID™ LR Security Device Is my fingerprint stored on the device? No. Your fingerprint itself is not stored. Only numeric representations of unique features of your fingerprint (for example, specific ridges, valleys or whorls) are encoded and stored on the device in the form of a template. These numeric representations are used in the matching process that confirms you as the authorized user of the device, and cannot be used to regenerate your actual fingerprint.
Privaris BPID™ LR Security Device 8. CUSTOMER SERVICE If the information contained herein has not answered your question(s) regarding your device, or to return defective products, please contact Privaris Customer Service at (866) 213-8252.
Privaris BPID™ LR Security Device 9. WARRANTY Limited Warranty. Licensor warrants that the Software will, for a period of one (1) year following its delivery to you, be in good working order and will conform in all material respects to Licensor's published specifications. Licensor does not warrant that the operation of the Software will be uninterrupted or error-free, or that the functionality of the Software will meet your individualized requirements.
Privaris BPID™ LR Security Device 10. LICENSING AGREEMENT READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT (“AGREEMENT”) CAREFULLY BEFORE OPENING THIS PACKAGE. THE SOFTWARE APPLICATIONS AND THE ACCOMPANYING USER DOCUMENTATION CONTAINED IN THIS PACKAGE ARE COPYRIGHTED AND ARE LICENSED (NOT SOLD) TO YOU IN ACCORDANCE WITH THE TERMS OF THIS AGREEMENT. BY OPENING THIS PACKAGE, YOU MANIFEST YOUR ASSENT TO BE BOUND BY THE TERMS OF THIS AGREEMENT.
Privaris BPID™ LR Security Device distribution of the Software not expressly authorized by this Agreement shall automatically terminate your right and license hereunder. This grant shall be limited to use of the Software with the Hardware in accordance with the terms of this Agreement. 4. Trade Secret Protection. The Software contains substantial trade secrets of Licensor, and you shall employ reasonable security precautions to maintain the confidentiality of such trade secrets.
Privaris BPID™ LR Security Device LICENSOR, ITS AFFILIATES, SUBCONTRACTORS, AND REPRESENTATIVES FOR LOSS OR DAMAGE CAUSED BY ANY FAILURE OF THE SOFTWARE TO OPERATE IN CONFORMITY WITH THIS WARRANTY, REGARDLESS OF THE FORM OF ACTION, WHETHER IN CONTRACT OR TORT, INCLUDING NEGLIGENCE, STRICT LIABILITY OR OTHERWISE, SHALL BE (1) THE REPAIR OR REPLACEMENT OF THE SOFTWARE, PROVIDED THAT SUCH SOFTWARE IS RETURNED IN ACCORDANCE WITH THE CONDITIONS PROVIDED HEREIN OR (2) IF SUCH REPAIR CANNOT BE MADE OR AN EQUIVALE
Privaris BPID™ LR Security Device party to this Agreement against the other party regarding the subject matter of this Agreement, the prevailing party shall be entitled to recover, in addition to any other relief granted, reasonable attorney fees and expenses of litigation. YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT AND UNDERSTAND THIS AGREEMENT AND THAT BY OPENING THIS PACKAGE, YOU MANIFEST YOUR ASSENT TO BE BOUND BY ITS TERMS AND CONDITIONS. 11.
Privaris BPID™ LR Security Device notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3.
Privaris BPID™ LR Security Device Copyright (C) 2001 Hans-Peter Nilsson Permission to use, copy, modify, and distribute this software is freely granted, provided that the above copyright notice, this notice and the following disclaimer are preserved with no changes. THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Copyright (c) 2001 Christopher G.
Privaris BPID™ LR Security Device Copyright (c) 2000, 2001 Alexey Zelkin All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
Privaris BPID™ LR Security Device Permission to use, copy, modify, and distribute this software for any purpose without fee is hereby granted, provided that this entire notice is included in all copies of any software which is or includes a copy or modification of this software and in all copies of the supporting documentation for such software. THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED WARRANTY.
Privaris BPID™ LR Security Device are not cryptographic related :-). 4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Privaris BPID™ LR Security Device Copyright (c) 2001, Dr Brian Gladman , Worcester, UK. All rights reserved. TERMS Redistribution and use in source and binary forms, with or without modification, are permitted subject to the following conditions: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2.
