Smart-Sync Digital Clock/Timer Install Guide OneVue Synchronized Time Solution Copyright © 2016 by Bluetooth SIG, Inc. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. Other third-party brands and names are the property of their respective owners. OneVue is a trademark of Primex. The innovative technology software solution for facility and time synchronization monitoring and reporting. All other trademarks are the property of their respective owners. ©2016 Primex.
Legal Notice Copyright ©2016 Primex. All rights reserved. Printed in the USA. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements.
About this Guide Audience This guide is intended for users tasked with installing Smart-Sync Digital Clock/Timer for use with the Primex OneVue Synchronized Time solution. Content messaging This guide includes notes, cautions, and warnings content that highlights important messages. Typeface Indicates Note Indicates something important or useful. Caution Indicates a command or procedure may have an unwanted or undesirable result.
Specifications - Smart-Sync Digital Clock/Timer 10 Installation Requirements - Smart-Sync Digital Clock/Timer 11 Warranty Technical Support CONTENTS 8 Installation and Operation Overview - Smart-Sync Digital Clock/Timer 12 13
Regulatory Approvals FCC Compliance Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by Primex might cause harmful interference and void the FCC authorization to operate this product. FCC Radio Frequency Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Radio Standards Specification (RSS) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
European Union Declaration of Conformity and Restrictions Hereby, Primex Inc. declares that this equipment complies with the essential requirements and other relevant provisions of Directive 1999/5/EC: The Primex Smart-Sync Digital LED Clocks/Timers. This equipment is marked with and can be used throughout the European community.
Specifications - Smart-Sync Digital Clock/Timer AC Powered Models 100 - 240 VAC, 50-60 cycle, supplied with a 10 feet (3.0 m) power cord with a two-prong plug Bluetooth® Wireless Communication Protocol Bluetooth® Low Energy (BLE) Wireless Technology, version 4.1 Bluetooth Range - up to 80 feet (24.
l The count-down timer can count down from a preset time to 00:00:00 l The decimal point on the far right (near the minutes/seconds digits) lights up to indicate down counter function l The user can preset count-down start time l Down counters can count from 99:59:59 to 00:00:00. The display flashes every second and the clock beeps for 3 seconds when 00:00:00 is reached Elapsed Timer audible tone 9 l Audible tone only on count-up and count-down events l Frequency: 3 kHz +/- 0.
Installation and Operation Overview - Smart-Sync Digital Clock/Timer Smart-Sync Clocks are designed to provide ease of installation - requiring no end-user configuration, simply take-out-of the box and install. The only operation dependency is its connection to an available Smart-Sync Bluetooth Wireless Network.
Installation Requirements - Smart-Sync Digital Clock/Timer Refer to the Important Safety Instructions before installing, operating or performing maintenance of clocks/timers. Note: Any damage to the clock or timer due to improper wiring voids the warranty. Installation requirements A Smart-Sync Bridge or Smart-Sync Clock/Timer is within 80 feet (24.3 m) from the clock installation location. AC-powered digital clock/timer power specifications Shipped from the factory with a 10 ft (3.
Warranty Two Year Limited Warranty Primex warrants this product to be free from defects in materials and workmanship for a standard of two (2) years from the date of purchase. Primex will at its sole option, repair or replace any components that fail in normal use. Such repairs or replacements will be made at no charge to the customer for replacement parts. The customer will be responsible for any transportation costs.
Technical Support You may require Technical Support when you have questions about product features, system configuration, or troubleshooting. Support services are delivered in accordance with your organization's support agreement, end user licenses agreements, and warranties, either with a Primex Certified Sales and Service Partner or directly with Primex. Support through Primex Certified Sales and Service Partners Ensuring our customers experience excellent service is of utmost importance to Primex.