Smart-Sync Analog Clock Install Guide OneVue Synchronized Time Solution Copyright © 2016 by Bluetooth SIG, Inc. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. Other third-party brands and names are the property of their respective owners. OneVue is a trademark of Primex. The innovative technology software solution for facility and time synchronization monitoring and reporting. All other trademarks are the property of their respective owners. ©2016 Primex.
Legal Notice Copyright ©2016 Primex. All rights reserved. Printed in the USA. Information in this document is subject to change without notice. The software described in this document is furnished under a license agreement or nondisclosure agreement. The software may be used or copied only in accordance with the terms of those agreements.
About this Guide Audience This guide is intended for users tasked with installing Smart-Sync Analog Clocks for use with the Primex OneVue Synchronized Time solution. Content messaging This guide includes notes, cautions, and warnings content that highlights important messages. Typeface Indicates Note Indicates something important or useful. Caution Indicates a command or procedure may have an unwanted or undesirable result.
Specifications - Smart-Sync Analog Clock Component Specifications - Smart-Sync Analog Clocks 9 Smart-Sync Analog Clock Install 11 Installation and Operation Overview 12 Installation Requirements Smart-Sync Analog Clocks 14 Warranty Technical Support CONTENTS 8 15 16
Regulatory Approvals FCC Compliance Pursuant to FCC 15.21 of the FCC rules, changes not expressly approved by Primex might cause harmful interference and void the FCC authorization to operate this product. FCC Radio Frequency Interference This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Radio Standards Specification (RSS) This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
European Union Declaration of Conformity and Restrictions Hereby, Primex Inc. declares that this equipment complies with the essential requirements and other relevant provisions of Directive 1999/5/EC: l Primex Smart-Sync Analog Clocks. This equipment is marked with and can be used throughout the European community.
Specifications - Smart-Sync Analog Clock Battery-powered models Typical five (5) year battery life. Battery life is based on operating conditions and may vary due to installed site conditions. 2 D-cell alkaline batteries (not included) Electric (AC-powered) models Power Supply 100-240 VAC, 18 in. (45.72 cm) cord with plug Single-Sided: 67mA @ 120 VAC Dual-Sided: 134mA @ 120 VAC Bluetooth® Wireless Communication Protocol Bluetooth® Low Energy (BLE) Wireless Technology, version 4.
Component Specifications - Smart-Sync Analog Clocks The following images represent the back view of each clock model.
Analog clock AC-powered model components 10
Smart-Sync Analog Clock Install Learn how to install and operate an Analog Clock.
Installation and Operation Overview Smart-Sync Clocks are designed to provide ease of installation - requiring no end-user configuration, simply take-out-of the box and install. The only operation dependency is its connection to an available Smart-Sync Bluetooth Wireless Network. l Smart-Sync Clocks are equipped with a Bluetooth Low Energy (BLE) Wireless Technology radio component, that allows the clock to establish a wireless connection to a Smart-Sync Bluetooth Wireless Network.
1. Smart-Bridge connects to your facility’s network to download Smart-Sync Clocks’ setting updates from OneVue, and connects to its NTP time source to receive the UTC time. 2. Smart-Sync Clocks automatically connect once a day at its system defined daily schedule to a Smart-Sync Bluetooth Wireless Network. At the time of connection, the clocks' statuses are forwarded to a Smart-Sync Bridge either by its communication path to another Smart-Sync Clock or directly to a Smart-Sync Bridge.
Installation Requirements Smart-Sync Analog Clocks Refer to the Important Safety Instructions before installing, operating or performing maintenance of clocks. Installation requirements A Smart-Sync Bridge or Smart-Sync Clock/Timer is within 80 feet (24.3 m) from the clock installation location. AC-powered analog clock installation guidelines A socket-outlet is required to be available within 18 in. (45.72 cm) from the clock installation location and should be easily accessible.
Warranty Two Year Limited Warranty Primex warrants this product to be free from defects in materials and workmanship for a standard of two (2) years from the date of purchase. Primex will at its sole option, repair or replace any components that fail in normal use. Such repairs or replacements will be made at no charge to the customer for replacement parts. The customer will be responsible for any transportation costs.
Technical Support You may require Technical Support when you have questions about product features, system configuration, or troubleshooting. Support services are delivered in accordance with your organization's support agreement, end user licenses agreements, and warranties, either with a Primex Certified Sales and Service Partner or directly with Primex. Support through Primex Certified Sales and Service Partners Ensuring our customers experience excellent service is of utmost importance to Primex.