Installation Manual

ManualsBrandsPrimex Manufacturing ManualsAudioSHELF MOUNTING SYSTEM (SMS)

Fit everything. Together.

FOR MORE INFORMATION CONTACT:

1.604.881.7875

1.604.881.7835

www.primex.com

STEP 1

STEP 3

Install horizontal joist and gang box

To ensure a comfortable working height it is recommended that the

top of the gang box be installed 36” from the ground using a level.

Note: Leave at least a 2” buffer zone around base to keep clear from

perpendicular walls.

Remove knock outs

Prior to installation, remove the knockouts for the conduit and

electrical box using a flush cutter tool.

STEP 2

STEP 4

Connect power and install electrical outlet faceplate

At this stage, connect conduit for outgoing and incoming services and

secure with Primex conduit adapters.

Install base over top of the gang box using No. 8 flat

head screws

Install single screw in corner flange, level, then secure with

additional screws.

The Primex Verge WiFi transparent Media Distribution Enclosures

for structured wiring bring reliability when managing today’s

inside cable system requirements. Its flexible design provides a

convenient, lockable and centralized location for easy installation

and distribution of multi-play services within residential and

commercial premises.

P3000 STANDARD FRAME & LID INSTALLATION

PRIMEX

MDE Installation Instructions

Verge MDE

P2100, P3000, P4200, P6300

PRODUCT

MODEL CODE

• DO NOT stretch enclosure walls or lid won’t seat properly.

• DO NOT overtighten mounting screws.

• DO NOT use mounting screws larger than #8.

WARNING

Note: Adhere to your local electrical code when installing all cabling.

452-3113

Summary of content (4 pages)

PAGE 1
PRIMEX MDE Installation Instructions The Primex Verge WiFi transparent Media Distribution Enclosures for structured wiring bring reliability when managing today’s inside cable system requirements. Its flexible design provides a convenient, lockable and centralized location for easy installation and distribution of multi-play services within residential and commercial premises. PRODUCT MODEL CODE Verge MDE P2100, P3000, P4200, P6300 WARNING • DO NOT stretch enclosure walls or lid won’t seat properly.
PAGE 2
PRIMEX MDE Installation Instructions PRODUCT MODEL CODE Verge MDE P2100, P3000, P4200, P6300 STEP 5 STEP 6 Measure installation position Measure, mark, cut and mount drywall Measure distances from edges of enclosure to outside of adjacent studs, floor and ceiling. Use measurements from step 5 to mark out drywall. Cut out marked area of drywall. Fit drywall over top of the installed enclosure base and secure.
PAGE 3
PRIMEX MDE Accessory Installation Instructions Rail Mounting System (RMS) 1 *Max mounted component thickness of 3.3” 2 Determine placement of RMP and Slide brackets into place from the side of the mounting plate. press pushpins to lock in place. 3 4 Place component and press bracket arm to hold securely. Recommended load 5lbs (2.27kg) Place in heavier equipment first. Shelf Mounting System (SMS) 1 2 Insert push pins to affix SMS to the Media Distribution Enclosure.
PAGE 4
PRIMEX MDE Accessories Product Verge MDE PRODUCT MODEL CODE Description Stock Code 10” UMP w/5’ tape, pushpins (x10) 7” RMP w/RMB2(x2), pushpins (x10) 7” RMP w/RMB(x2), pushpins (x10) 7” RMP w/RMK(x2), pushpins (x10) 10” RMP w/RMB2(x4), pushpins (x10) 10” RMP w/RMB(x4), pushpins (x10) 10” RMP w/RMB2(x2)/RMK(x2), pushpins(x10) 125-1623 125-1655 125-1656 125-1657 125-1658 125-1659 125-1660 Shelf Mounting System (Single-1/pk) Shelf Mounting Sytem (Service divider-2/pk) Shelf Mounting System (bulk-18/pk)