LTE Tracker Prime PT200V User Manual Revision: 1.00 Document Title Version Finale Date Prime PT200V User manual 1.
Contents 1 Introduction......................................................................................................................................3 2 Product Overview.............................................................................................................................3 2.1 Appearance........................................................................................................................... 3 2.2 Buttons/4PIN Interface Description..............................
1 Introduction Prime PT200V is a powerful GPS locator which is designed for vehicle, human, pets and assets tracking. It works on LTE B4/B13 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals.
PIN interface Connected to a charging dock can power on Prime PT200V Backend server developer or administrator can use the debug dock to configure Prime PT200V (by engineer not by end user). TEST Key Long press to make a call 2.3 LED Description Figure 1-2 There are 3 LED lights in Prime PT200V device, the description as following.
power on Power off Dark 3 Getting Started 3.1 Parts List Name Picture Remark Prime PT200V Locater The LTE/GPS locator. Prime PT200V charging Dock It used to be charging for the Prime PT200V. 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. During the charging process, the Power LED light will slow flash. When the battery is fully charged, the Power LED light will be Ever-dark.
Figure 2-1 3.4 Power on/Power off Figure 2-2 Power on: Press the Power key at least 3 seconds and release it to power on Prime PT200V device. Note that, the Power LED light will light for a moment and then turn off. Power off: Press the power key about 3 seconds; Power LED light will light for a moment and then turn off, which indicates that Prime PT200V device has been powered off.
Note: the user can not power off Prime PT200V if the power key is disabled by protocol. 4 Frequency LTE: Band4、Band13 GPS:1575.42MHz WIFI/BT:2.4GHz 5 Trouble shooting and Safety info 5.1 Trouble shooting Trouble Possible Reason Solution Messages can’t be reported to the backend server by Mobile network. APN is wrong. Some APN can not visit the internet directly. Ask the network operator for the right APN. The IP address or port of the backend server is wrong.
Please do not use Prime PT200V on the airplane or near medical equipment. FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user.