What you need to know ยป DIDO Air Transmitter and Receiver should be in the same room Best performance is within 10 Meters The signal bounces off walls/ceiling Will work with multiple transmitters and receivers <10M Optimum Performance oo + TV-Top (best performance) and Behind the-TV (hidden) wall mounts included = Designed for optimum performance with DIDO Duo and DIDO Edge = Use with WIND laptops requires manual EE EY Ag)
Finally -a real Quick-Start 1: Power everything down 2: Replace any HDMI cable with DIDO Air Blu ray or other 3: Mount the receiver on top of or behind Source(s) Your TV with included mounts 4: Power everything back up No...
[2 e VT Thy 11972 Included TV-top-mount is designed to hold Receiver securely on top of any flat panel TV Included wall mount allows for hidden mounting, Bracket can be bent to any required angle. Bouncing signal off a wall or ceiling improves performance. Insert in slot on receiver and mount to wall.
i010 1 [LLL RIC) Te dag) # Note that when powered on, a transmit/receive pair always tries to connect to the last known partner. # If you have multiple transmitters, you can switch between them either by pressing the button on the back of the receiver or using the input button on a CC-enabled TV.
Connecting to a Laptop with Embedded Wind Many current laptops have Wind transmitters embedded. Due to PC privacy sconce, switching to a PC requires two steps: 1) Tum your DIDO Air transmitter(s) off 2) Use the PC software to scan for your receiver and manually connect. 3) Press button on Receiver if slow 10 connect To switch back, disconnect the laptop using its software and tum your DIDO Air Transmitter on.