BLUETOOTH® KEYBOARD Rev 0.
BLUETOOTH® KEYBOARD Rev 0.1 User’s Quick Guide Congratulations on your purchase of the Primax KBBT53811 Bluetooth® Keyboard! This guide will take you through all the functions of this keyboard. Introduction Primax KBBT53811 Bluetooth® Keyboard is the latest in a wide range of tablet peripherals manufactured by Primax and is designed to provide you with the highest level of comfort available while also allowing for maximum functionality.
BLUETOOTH® KEYBOARD Rev 0.1 Bluetooth® keyboard connection settings Follow below steps to connect the Bluetooth® keyboard and the tablet system. 1. Turn on the power switch in front of the Bluetooth® keyboard. The keyboard connection indicator light blinks blue. Note: If the Bluetooth® indicator lights stop blinking, long press the connect buttons on the keyboard to restart the connection process. Note: If the indicator blinks quickly, it means this keyboard has been paired before.
BLUETOOTH® KEYBOARD Rev 0.1 LED Indicator This Keyboard includes one LED in the left side with 2 colors presenting connection and power status. 1. In Pairing (Blue): Blinking one time every 1 second, time out after 5 minutes. 2. In Reconnecting (Blue): Double blinking every 1 second, time out after 10 seconds. 3. Connected (Blue): Steady for 2 seconds. 4. Cleaned up the paring list (Orange and Blue): Both orange and blue indicators shall be turned on and flashing twice then turned off. 5.
BLUETOOTH® KEYBOARD Rev 0.1 Power Supply This keyboard has built-in rechargeable Li-on battery. When user first time opens the box, it’s recommended to fully charge the battery with bundled cable through MicroUSB port. Troubleshooting Question: My keyboard is not working. What should I do? Answer: 1. Check if the Bluetooth® connection is turned on correctly in the system side. 2. Other system devices, such as PC cards, may cause conflicts that prevent your keyboard from working properly.
BLUETOOTH® KEYBOARD Rev 0.1 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
BLUETOOTH® KEYBOARD Rev 0.1 IC Statement This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio exempts de licence.
BLUETOOTH® KEYBOARD Rev 0.1 CE Statement CE Declaration Of Conformity Hereby, the manufacturer, declares that this s Keyboard Bluetooth Presenter in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Essential requirements -- Article 3 Protection requirements for health and safety - Article 3.1a --Testing for electric safety according to EN 60950 has been conducted. These are considered relevant and sufficient.
