Title: Primax PBD-2 User manual Product Name: PBD-2 致伸科技股份有限公司 PRIMAX ELECTRONICS LTD. Version #: 1.
1. Get started The dongle contains a blue indicator light and a pairing button. It is shown in the figure below. Blue LED Pairing button Driver No driver and application needed if operating system is Windows 2000 or Windows XP. PIN The PIN is 0000. Blue LED indication Pairing state: Fast blinking (200 ms blue and 200 ms off). Paging state: Normal blinking (200 ms blue and 2000 ms off). Connectable state: Slow blinking (200 ms blue and 5000 ms off). Connected state: Continuously on.
A headset is waiting for a connection Scenario 1: If the dongle did NOT have connected to a headset in last connection, 1. Plug the dongle to a computer. 2. The dongle will enter pairing state (fast blinking). Then the dongle tries to discover and pair a headset. 3. Within 60 seconds, the headset answering the inquiry, the dongle will transit to paging state (normal blinking). 4.
1. Plug the dongle to computer. 2. The dongle will enter paging state (normal blinking). The dongle tries to discover and page a headset. The headset is the last one device, which has been connected to the dongle. . 3. After 30 seconds, no any headset answering the paging, the dongle will transit to connectable state (slow blinking).
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.