Optical Wireless Mouse User’s Manual
Contents Welcome!…………………………………….….…………...….….1-1 Optical Wireless Mouse Installation...……………………….…..…1-2 ID Mode Settings………………………..….…………………….. 1-3 Using the Optical Wireless Mouse……………….. ………….…… 1-4 Mouse Care and Troubleshooting……………….....….……...…….
1-1 Welcome! Congratulations on your purchase of your new Optical Wireless Mouse. This manual contains information that will assist you in installing, operating, and caring for your Optical Wireless Mouse. Product Description: The Optical Wireless Mouse was designed to give you freedom of movement and an enjoyable experience while working or gaming. Its sleek, comfortable design makes ordinary tasks easier and helps offer a new level of comfort to your PC computing experience.
1-2 Optical Wireless Mouse Installation Optical Wireless Mouse Installation Your Optical Wireless Mouse installation is fast and easy. It can be completed in 3 simple steps. Note: After installing the driver software on your computer you will need to shut down and reboot your system. Make sure that all work is saved and all programs are closed before installing this device. Step 1 - Battery Installation: 1. Locate the two AA sized 1.5 Volt batteries that came in your Optical Wireless Mouse package. 2.
1-3 ID Settings z Default Mode Receiver: *Press the button located on the top of the receiver over 3 sec; the red led of the receiver will dim after release the button. When the led is dimmed, Default mode is set. *The product is default mode when ex-factory. Mouse: *The mouse will be set Default Mode automatically via replace batteries every time. z ID Mode Step 1. Press the button located on the top of the receiver then the 'Red" LED is on Step 2.
1-4 Using the Optical Wireless Mouse Using the Optical Wireless Mouse The Optical Wireless Mouse has multiple functions and features such as Zoom and Auto-scrolling, which helps you to increase your productivity. You can also assign frequently used functions and/or shortcuts to the mouse buttons by using the tabs in the Mouse Suite software. To launch the Mouse Suite software, click Start, click Settings, and click on the Control Panel. In the Control Panel, double-click on the Mouse icon.
1-5 Mouse Care and Troubleshooting Mouse Care WARNING: Always disconnect the mouse before cleaning. Keep all beverages away from the mouse working area and avoid any spills. Maintaining your Optical Wireless Mouse will ensure longer life and will minimize the chances of causing damage to your mouse and computer. There are no other user serviceable parts. Service and repair may only be done by IBM.
1-6 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
