THE FEATURE ORIENTED PHONE SYSTEM FOR EVERY HOME With exclusive Emergency Help System you can Call-4-Help with a press of a button Hear who is calling before you decide to answer an incoming phone call* Answer your phone and speak hands-free even if you can’t get to the phone** USER MANUAL ClearVoice 50™ ClearVoice 100™ ClearVoice 200™ CALL BACK CALL# AM REPEAT NEW VOICE CLIP PM SCROLL DELETE MENU LOUD LOW ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 0 9 # HANDSET CLIP E
TABLE OF CONTENTS Important Safety Instructions ........................................................................................................... 2 Safety Instruction for Batteries ......................................................................................................... 2 Installation Instructions ..................................................................................................................... 2 Important Notes ...................................................
IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. 2. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. 3.
IMPORTANT NOTES • The telephone portion of your dialer/message console has been tested and found to comply with all applicable UL and FCC standards. • This product is not a security system or an emergency service device. • The manufacturer makes no claim as to the suitability of this product to perform as a life-saving device. See section marked LIMITED NINETY DAY WARRANTY for full warranty conditions.
• Consult the dealer or an experienced radio TV technician for help. a) A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
LOCATION OF CONTROLS 10 1 11 CALL BACK 2 CALL# AM REPEAT NEW VOICE CLIP PM 12 SCROLL DELETE 13 14 15 3 4 5 MENU 6 LOW LOUD 7 8 ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 0 9 # HANDSET CLIP 16 17 18 EXIT 19 FLASH 20 21 HOLD 22 REDIAL 9 LOUD SPEAKER A Quality Of Life Product TM 23 24 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14.
INSTALLATION Where to install this feature-oriented telephone When installing this feature-oriented telephone, consider that the unit should be placed in an area of common use during the day and night time. ClearVoice 200™ users should locate the phone within 10-15 feet line of sight from where user spends a lot of time. The remote pick-up can be from a distance far greater than the 10-15 feet.
Choose your location Your ClearVoice 50,100 or 200 must be placed on a hard surface and connected to both the telephone wall jack and an AC power source. Allow at least one inch to the rear and four inches above the unit for ventilation. If you have a ClearVoice 100 or 200, we suggest you locate it in a location within 10 feet of where user spends much of his time. For users of ClearVoice 100 or 200: You can activate the speakerphone on an incoming call of the ClearVoice 100 or 200 remotely.
SPECIAL HIGHLIGHT FEATURES The Phone that can tell you who is calling The Phone that can answer a call remotely (ClearVoice 100 and 200 only) The Phone that can get you emergency help with a press of a button Talking Caller ID* – allows user to hear # calling or name Remote Pickup** (Clearvoice 100 and 200) – allows user to answer incoming call remotely Remote Speakerphone** (ClearVoice 100 and 200) – allows user to speak hands-free remotely up to 20 feet Emergency Help System (EHS) – with a press of a butt
Please read this section prior to using the important features of your ClearVoice 50,100 or 200.
Setting the TIME and DATE 1. Press and release the MENU button until TIME/DATE is shown. 2. Press the OK button. The display shows ENTER TIME and the hour digit is flashing. 3. Select the current hour using the or and scroll to the present hour and confirm with OK button. The minutes will now flash in the display. 4. Select the required minutes using the or and scroll to the present minute Press the OK button. The display now shows ENTER DATE and the month digit is flashing. . 5.
Setting the Voice ON/OFF The telephone is factory preset with all voice features ON. (To exit, press Exit button) Note: The volume of the voice features is regulated thought the slide switch located on the side of unit If the user does not wish to hear the voice prompts, this voice feature can be set to OFF. We suggest that while programming you keep this feature ON. 1. Press and release the MENU button until VOICE is shown. 2. Press the OK button.
USING THE TELEPHONE Dialling a Call 1. Pick up the handset or press SPEAKER button (the speaker LED will light) and wait for a dial tone. 2. Press the keypad for the telephone numbers you wish to dial. The display will show the number that you dialed on the keypad. If you dial a number over 14 digits long, it will show the last 14 digits only. 3. When you have completed your call, hang up the handset, or press SPEAKER button again.
Speaker Volume Control You can adjust the speaker volume for a more comfortable listening level by sliding the switch. This will also adjust the volume of the voice driven features. It is suggested to maintain the volume at medium level. Redial Note: To redial the last number called 1. Lift the handset or press SPEAKER button. 2. Press the REDIAL button. Noted: The last number dialed (up to 32 digits long) can be redialed. Pause You can insert a 3.
PHONE BOOK Note: The phone book allows you to enter, display, record the persons name and specify if this a telephone no. that is to be called in the units Telemergency Emergency Help system. To use the phone book, press button until the icon is displayed Storing up to 30 telephone numbers in the phone book including emergency nos. to be called in an emergency. Note: It is important that up to 5 telephone nos. be reserved for the emergency function. See Emergency Features in this User Manual.
Example: To enter the name JIM. Press 5 button until J is displayed…. ………..Wait 2 seconds Press 4 button until I is shown………………. Wait 2 seconds Press 6 button until M is shown……………….Wait 2 seconds TABLE I Notes: Incorrect entries can be deleted with DELETE button. To do this, move the cursor the correct position using or and then press DELETE button. If you wish to place a pause in a telephone number…press redial button and a P will display To review the Phone Book Memory 1.
To Edit the Phone Book Memory 1. 2. 3. 4. 5. Press and release button, icon is shown. Select the required location from the phone book by pressing or . Press and hold MENU button for two seconds. The display will show EDIT?. Press OK button, the first digit of the selected phone number will be flash. or . To delete the digit, press You can move the cursor to the required position by pressing DELETE button, or press any numeric key to replace the digit and confirm with OK button.
EMERGENCY FEATURES EMERGENCY HELP SYSTEM This feature allows you to Call-4-Help from those people you would like called in an emergency. For the Emergency Help System to be activated and also dial out the emergency telephone numbers entered in the sequence you would like the telephone nos. called, requires that the telephone line ClearVoice 50, 100, or 200 is connected to is ON HOOK(hung up) and all instructions in setting up have been done. Emergency Message Two options are provided on the message: A.
PHONE BOOK (Emergency Nos.) IMPORTANT: We suggest you enter up to 5 telephone nos. you would like to have called in an emergency with just one (1) press of a button. Note: The phone book allows you to enter, display, record the persons name and specify if this a telephone no.
To record the voice (example: John), hold down OK button, speak clearly into microphone after a beep and “VOICE” icon is flashing. Release the button when you are finished, the unit will stop recording after 3 seconds. The recorded name will then be played automatically. [Recording the Voice is necessary for the personalized talking Caller ID and talking phone book feature] 8. Repeat step 2 to 6 to enter more emergency no, or press (Exit) button to exit.
To dial and check a displayed emergency telephone number from the Phone Book Memory: 1. With the required display telephone number showing with the icon on the LCD on the display, press OK button, press OK button again. The telephone dials out the displayed telephone number automatically in speakerphone mode. 2. The display shows dialed out telephone number and counting timer. OR 1. 2. 3. 4. 5. Pick up the handset or press SPEAKER button (the speaker LED will light) and wait for a dial tone.
To Edit the Phone Book Memory 1. 2. 3. 4. 5. Press and release button, icon is shown. Select the required location from the phone book by pressing or . Press and hold MENU button for two seconds. The display will show EDIT?. Press OK button, the first digit of the selected phone number will be flash. or . To delete the digit, press You can move the cursor to the required position by pressing DELETE button, or press any numeric key to replace the digit and confirm with OK button.
To activate the Emergency Help System: IMPORTANT: For the Emergency Help System to activate and also dial out the emergency telephone numbers entered in the desired sequence, as entered, requires that the telephone line ClearVoice 50, 100, or 200 is connected to is ON HOOK(hung up), and all instructions in setting up this important feature have been cofirmed. 1. Press and hold the button on the telephone is pressed for 3 seconds, the NEW CALL LED on the telephone will blink for 15 seconds.
3. When the red key on the optional pendant (standard on the ClearVoice 200™) is pressed and held for 3-5 seconds, the LED on the pendant will begin flashing and if the pendant is pressed for 8 seconds the LED will simply stay ON for approximately five (5) seconds letting user know that the Emergency Help System has been turned off and reset. To activate the Emergency Help system is simple. Simply press and hold down red button until LED flashes on the pendant. Then release button.
THE CALLER ID At each incoming call with available Caller ID, the telephone will ring and announce the caller with their name (if a name was recorded associated with a telephone number in the phone book) or with the voiced telephone number. Important: When using the Caller ID features, please note it is only available at Caller ID mode (CLIP icon turns on). If the CLIP icon is off, press button once.
Viewing the Caller ID Memory Press and scroll to review more recent calls. The CALL# will increase. After you view the most recent data in memory, the display will show END OF LIST. Press and scroll to review older calls. The CALL# will decrease. After you view the oldest data in memory, the display will show END OF LIST. If the data in memory is being reviewed for the first time, the NEW icon will be lit. The NEW CALL LED will turn off if you review the data.
IN CASE OF DIFFICULTY SITUATION ACTION The LCD can not be seen clearly Modify the LCD contrast setting (see paragraph) The telephone does not dial Check your telephone line connection The telephone can not perform any of the features Check your mains power supply connection The optional pendant(CV100) does not pick up an incoming call Replace the 4 AA alkaline batteries in the unit.
LIMITED NINETY-DAY WARRANTY This product is warranted by Telemergency, Ltd. against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase. EXCEPT AS PROVIDED HEREIN, TELEMERGENCY, LTD. MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, TELEMERGENCY, LTD.