Primare A33.
Copyright and acknowledgments Copyright © 2007 Primare Systems AB. All rights reserved. Primare Systems AB Renvägen 1 SE-352 45 Växjö Sweden http://www.primare.net Issue: A33.2/2 The information in this guide is believed to be correct as of the date of publication. However, our policy is one of continuous development and so the information is subject to change without notice, and does not represent a commitment on the part of Primare Systems AB. Primare is a trademark of Primare Systems AB.
Welcome Welcome to the Primare A33.2 Amplifier! The A33.2 is a modular power amplifier designed as the ideal output stage in a home theatre or hi-fi system. Here is how to set up your A33.
Additional information Technical specification Outputs Response Remote power on/off Output power per channel: 120W into 8Ω, 200W into 4Ω Frequency response: <10Hz – 100kHz, -3dB For convenience the A33.2 can be powered on and off via a remote link cable, avoiding the need to switch it on or off separately from the preamplifier in the system. Output impedance: <0.03Ω Inputs Line inputs: 1V for 120W into 8Ω XLR inputs: 2V for 120W into 8Ω Input impedance: 11kΩ THD: <0.
Primare Systems AB, Renvägen 1, SE-352 45 Växjö, Sweden. http://www.primare.