Installation Guide

ManualsBrandsPrimacoustic ManualsAV Furniture & DecorBroadband Bass Trap

INSTALLATION MANUAL

FullTrap

Congratulations on purchasing the FullTrap from Primacoustic. The FullTrap is an easy to

assemble bass trap that will effectively absorb a wide bandwidth of frequencies and look

great for many years to come. Please take a few minutes to read through this assembly

manual. It will give you a list of included parts, as well as step by step assembly and wall

mounting instructions. Please refer to www.primacoustic.com/appnotes for various placement

options, benets, and general room acoustics information. Should you have any questions or

comments, we invite you to send an email to: info@primacoustic.com.

TOOLS REQUIRED:

- Medium sized Phillips screwdriver

- 48” Bubble Level and small bullet level

- Wall Stud nder (recommended)

- Cordless Drill (recommended for installing drywall

anchors)

BOX CONTENTS:

Before beginning assembly, please take a moment to

familiarize yourself with the box contents. It will include:

(QTY) Description:

(2) 48” Black frame side sections

(1) 23” Black frame ‘Top’ section

(1) 23” Black frame ‘Bottom’ section

(2) 46” Panel Stops

(1) 23” Beveled Wall Mount Stretchers

(1) 23” Beveled Cross Support

(1) 23” Cross Support

(1) Fabric wrapped berglass panel

(1) Loaded vinyl barrier

HARDWARE BAG CONTENTS

(QTY) Description:

(8) Cams-locks

(8) Cam-pins

(16) Wooden Dowels

(8) Medium Phillips Screws

(8) Short Phillips Pan-head Screws

(2) Long Phillips Pan-head Screws

(2) Heavy Duty Phillips Screws

(2) Plastic Drywall Anchors

23” TOP

23” BOTTOM

46” PANEL STOPS

BEVELED WALL

MOUNT

CROSS SUPPORT

BEVELED CROSS

SUPPORT

LOADED VINYL

FABRIC COVERED

ACOUSTIC PANEL

1588 Kebet Way, Port Coquitlam, BC Canada V3C 5M5

Tel: (604) 942-1001 • Fax (604) 942-1010

Primacoustic is a division of Radial Engineering Ltd.

48” SIDES

Warranty: Please inspect panels immediately after purchase and before mounting. Primacoustic Broadway acoustic panels are guaranteed to be free of manufacturing defects for a period of thirty (30) days after purchase. In the unlikely

event that a defect is uncovered, please call 604-942-1001 to obtain an RA number (Return Authorization number) from Primacoustic before the thirty (30) day warranty period expires. Once you have obtained an RA number you must

return the product, freight prepaid, within fteen (15) days after the date the RA number is issued. Please return the product in the original packaging (or another, affording an equal degree of protection) with all of the following: (1) RA

number clearly marked on the returned package; (2) a receipt or bill of sale showing proof of purchase from an authorized retail seller; and (3) a written note describing the defect and including your name, address, telephone number

and the applicable RA number. You are solely responsible for all shipping and insurance costs for returning the product to Primacoustic, and you will not be reimbursed or compensated for any loss or damage incurred during return

shipping. Primacoustic will at its discretion repair or replace the panel. Should the panel be no longer available, Primacoustic reserves the right to exchange this with a panel of similar performance and value. Due to different dye lots,

Primacoustic cannot guarantee exact color match. This Warranty shall solely extend to the original owner and is limited to manufacturing defects and excludes any damage due to wear and tear, abuse, misuse, misapplication, color

fading or deterioration due to prolonged exposure to ultra violet light, smoke, humidity or other environmental factors. It is understood that the use and suitability of Broadway is entirely the responsibility of the buyer or specifying engineer

and as such, these parties agree to hold Primacoustic, or it’s associated company, and/or ofcers, harmless from any responsibility whatsoever other than what is clearly outlined in this warranty.

Summary of content (4 pages)

PAGE 1
FullTrap INSTALLATION MANUAL Congratulations on purchasing the FullTrap from Primacoustic. The FullTrap is an easy to assemble bass trap that will effectively absorb a wide bandwidth of frequencies and look great for many years to come. Please take a few minutes to read through this assembly manual. It will give you a list of included parts, as well as step by step assembly and wall mounting instructions. Please refer to www.primacoustic.
PAGE 2
1 Place the two 48” side sections on the floor with the pre-drilled holes facing up. For each side section push eight wooden dowels into the pre-drilled holes. 2 Connect the 23” top and bottom sections to a 48” side section. Note the 23” top section has small piolet holes drilled along the front edge. Use a Phillips screwdriver to tighten the cams snuggly. If the cam-locks won’t tighten ensure the arrow head is facing outward so the cam-pins line up with the cam-locks.
PAGE 3
VINYL BARRIER ASSEMBLY Set two panel stops with the four small piolet holes facing up, and larger pre-drilled holes facing sideways. Lay the vinyl material on top of the panel stops. Line up the edges flush and keep the vinyl material square with the panels stops (diagram). 6 With the frame assembly lying on it’s back, set the vinyl barrier assembly into the frame with the panel stops facing upward (diagram).
PAGE 4
www.primacoustic.com WALL MOUNTING INSTRUCTIONS Select the location where you would like to hang your FullTrap. Ideally, the center of the FullTrap should be positions at the same height as your ears when seated in your listening position but this is flexible if room decore or listening position dictates otherwise. Mount wall support directly to studs or use appropriate anchors or toggle bolts. Mark the wall where the top of the FullTrap will be.