Installation Guide

ManualsBrandsPrimacoustic ManualsAV Furniture & DecorTri-Corner Bass Trap

]

[

INSTALLATION MANUAL

Cumulus Trap

Congratulations on purchasing the Cumulus Trap from Primacoustic. The Cumulus is an

easy to install triangle bass trap that will effectively absorb a broad band of frequencies and

look great for years to come. Please take a few minutes to read through this install manual.

It includes a list of parts as well as step by step mounting instructions. Please refer to

www.primacoustic.com for various placement options, beneﬁ ts, and general room acoustic

information. Should you have any questions or comments, we invite you to send us an email

at: info@primacoustic.com

BOX CONTENTS:

Before beginning assembly, please take a moment

to familiarize yourself with the box contents.

Ref.# Description: (Qty.)

Cumulus Trap panels (2)

Rings (2)

Springs (6)

Cleats (6)

Butterﬂ y anchors (2)

Eye-screws (2)

Cable-tie straps (2)

TOOLS REQUIRED:

• Hammer or mallet

• Drill with 5/16” and 1/8” bit

]

Primacoustic is a division of Radial Engineering Ltd.

1638 Kebet Way, Port Coquitlam, BC Canada V3C 5W9

Tel: (604) 942-1001 • Fax (604) 942-1010 • info@primacoustic.com

Speciﬁ cations and appearances subject to change without notice.

Summary of content (4 pages)

PAGE 1
Cumulus Trap INSTALLATION MANUAL Congratulations on purchasing the Cumulus Trap from Primacoustic. The Cumulus is an easy to install triangle bass trap that will effectively absorb a broad band of frequencies and look great for years to come. Please take a few minutes to read through this install manual. It includes a list of parts as well as step by step mounting instructions. Please refer to www.primacoustic.com for various placement options, benefits, and general room acoustic information.
PAGE 2
www.primacoustic.com 1 Before you unpack the shipping box, check for damage and missing items. All included parts are listed on the front page of this manual. 2 3 Each Cumulus requires three springs and three cleats. Repeat the process until you have prepared them as shown. 4 5 Place the Cumulus panel face down on a clean surface. Hook one cleat onto the edge of the Cumulus. Stretch the two remaining spring cleats and hook on to the other edges. 6 Prepare the springs and cleats.
PAGE 3
Prepare the butterfly anchors by pushing in with your finger until the anchor folds in half. Squeeze the halves together and insert into the 5/16” hole. 8 Use a hammer to lightly tap the anchor in flush with the ceiling. 9 Once the anchor is installed, fully screw the eye-screw in untill the threads are no longer visible. Doing so will ensure the butterfly anchor opens on the other side. 10 Thread the cable-tie through the ring on the back of the panel.
PAGE 4
www.primacoustic.com FIRE SAFETY Broadway panels have been tested to meet the most stringent ASTM and CSA testing requirements for the USA and Canada. For international customers, please consult your local building authority for proper cross-compatibility specifications. BROADWAY FIRE & BURN TEST CHARACTERISTICS TEST CLASS FLAME SPREAD SMOKE DENSITY ASTM E 84 1 OR A 15 FSI 155 SD CAN/UL-S102 1 OR A 15 FSCI 155 SD * Actual test data provided by Bodycote Materials Testing Inc.