Data Sheet

ENGINEERING DATA SHEET
Primacoustic is a division of Radial Engineering Ltd. • 1588 Kebet Way Port Coquitlam, BC V3C 5M5 • Tel: [phone] Fax: [phone]
www.primacoustic.com • [e-mail] • Primacoustic Engineering Data Sheet • Part #R870 2200 00 • Copyright © 2016 • Subject to change without notice.
cRAsHGuARD +
cRAsHGuARD 421
The CrashGuard™ and CrashGuard 421™ are drum microphone shields
designed to isolate the drum and reduce the spill from nearby cymbals.
This allows the engineer to increase the attack of the drum without the
cymbals becoming overly present.
Made from high-impact ABS, the light-weight CrashGuard attaches to the
boom arm and is held in place using the microphone’s clip. The inside or
underbelly of the CrashGuard is completely lined with high-density open
cell acoustic foam to reduce internal reections. The innovative design
features a cable access port that allows the microphone to be articulated
for optimum placement.
The CrashGuard has been tested for t with many major brands of
instrument microphones. The CrashGuard 421 has been specially
designed to t the classic Sennheiser MD421 microphone.
Features
• High-density acoustic foam liner
• High-impact ABS outer shell
• Innovative rear access cable port
Benets
• Reduces sound of cymbals from spilling into drum mics
• Allows drum mic to be articulated for precise positioning
• Improves isolation for added control of each drum
Cool Stuff
• Light-weight design ts most popular microphones
• Easily attaches to any stand using the stock mic clip
• Protects the microphone from aggressive stick hits
SPECIFICATIONS:
CRASHGUARD 421
CRASHGUARD
APPLICATIONS:
ORDER NUMBER
CrashGuard - P300-0105-00
CrashGuard 421 - P300-0107-00
SHELL MATERIAL
SP-9010 ABS plastic shell, 3/16” (4.5mm) thick
Black with textured nish
ABSORBER MATERIAL .5” High-density open cell acoustic foam, 2.2 lb/per cu-ft, charcoal colour
DIMENSIONS 7” (178mm) x 3.75” (95mm) x 2” (51mm)
The Crashguard is made from 75% recycled materials