Focus-Iris Manual Ver 1.0 Preston Cinema Systems • 1659 Eleventh Street • Santa Monica CA 90404 tel 310-453-1852 fax 310-453-5672 www.prestoncinema.
Table of Contents 1. 2. 3. 4. Description Operation Specifications FCC Statement 1.0 Description The Focus-Iris unit is a single channel wireless control. It can be used to control either the focus or iris channel of an MDR2, wireless V+F Lens Control, or Radio Dimmer. The switch located near the top of the control selects between the focus and iris function. An FM50 type Li-Ion Battery (11) powers both the Radio module.
1 2 10 9 3 4 1. 2. 3. 4. 5 8 6 7 Antenna Focus/Iris mode switch Camera R/S Link LED shows signal strength 5. Power Switch 6. Wireless Channel indicator 7. Channel Switches 8. Lens position indicator 9. Set/Reset limit switches 10. Lens position bargraph Front View 14 11. Li-Ion Battery 12. Battery Release 13. Neck-strap attachment 14. Marking Ring 15.
2.0 Operation 1. Install a charged Li-Ion battery 2. Set up the Motor Driver or Radio Dimmer. Apply power. Note the channel setting. If the device being controlled is a Video Lens Control or Radio Dimmer, set the mode to either Focus or Iris, so that it can be controlled by the Focus-Iris unit. 3. Press the POWER button (5) momentarily. The power LED just above the switch will light. 4. Use the push-button switches (7) to match the channel as shown in the display (6) to the channel of the receiving unit. 5.
. FCC Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
