p10 HI-RES MUSIC STREAMER User Manual
Introduction Specifications Thank you for choosing the Presto Music streamer, which we hope brings many hours of enjoyment listening to your favourite music at the highest quality resolution. By controlling the streamer from the Presto Music app you will be able to explore some of the finest music making, curated by our expert editorial team, and learn more about the history of the music and the artists who perform it.
Setup Connecting the streamer to your home Wi-Fi network Installing the streamer should only take a few minutes, and can be done through any device that is running the Presto Music app and has Bluetooth. Alternatively, if you are using a computer you can connect to your home network using the WPS button on the streamer box.
WPS setup If you do not have a mobile device and will be controlling the streamer from the Windows or Mac desktop app you will need to use the WPS button on the streamer and on your router to in order to add the streamer to your home network. The app is not needed for this process. 1. Press the WPS button on your streaming box - the blue light should start flashing rapidly. 2. Press the WPS button on your home Wi-Fi router. 3. After a few seconds the blue light should stop flashing and remain solid blue. 4.
Problem Things to try... The light on the streamer is not on at all. The blue light has deliberately been set quite dim so as to be unobrusive, and can be hard to see in bright sunlight. Check that it is definitely not on. No blue light at all suggests there is no power going to the streamer. Check it is connected to the power supply. If possible try alternative cables and plugs to rule out any issues with those.
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
