Eris™ Series E44 / E66 High-Definition MTM Studio Monitors Owner’s Manual ® www.presonus.
Table of Contents 1 Overview — 1 3 Tutorials — 8 1.1 Introduction — 1 3.1 Monitor Placement — 8 1.2 Summary of Eris E44/E66 Features — 2 3.2 Input Gain Setting — 10 1.3 What is in the box — 3 3.3 Equalizer Setting Suggestions — 10 2 Hookup — 4 3.4 2.1 Rear Panel Connections and Controls — 4 Acoustic Space Setting Suggestions — 11 2.2 3.1.1 Badge Rotation — 9 4 Resources — 12 2.1.1 Inputs — 4 4.1 Technical Specifications — 12 2.1.2 Power — 4 4.2 Troubleshooting — 14 2.1.
Eris™ Series E44 and E66 Owner’s Manual 1 Overview 1.1 Introduction Thank you for purchasing the PreSonus Eris E44/E66 studio monitors. The E44 and E66 active monitors feature a nested MTM (midwoofer-tweetermidwoofer) design that delivers accurate response, expanded frequency range, and the widest stereo field available in their class. We encourage you to contact us at 225-216-7887 (9 a.m. to 5 p.m. Central Time) with questions or comments regarding your PreSonus Eris E44/ E66.
1.2 Summary of Eris E44/E66 Features 1.2 Summary of Eris E44/E66 Features •• Nested MTM design provides smooth on- and off-axis response •• Dual 4.5/6.5” Kevlar LF Drivers produce a more dynamic output than conventional designs •• 1.
Eris™ Series E44 and E66 Owner’s Manual 1.
2.1 Rear Panel Connections and Controls 2 Hookup 2.1 Rear Panel Connections and Controls 2.1.1 Inputs Line-level Inputs. The Eris E44/E66 provides a choice of three MIN inputs: two balanced (XLR and ¼” TRS) and one unbalanced (RCA). These inputs accept a line-level signal from your audio U INPUT GAIN source and feed that signal to the monitor’s built-in power LOW MAX CUTOFF amplifiers.
-4dB Balanced -2dB HIGH FREQ MID FREQ 0dB -3dB -4dB Eris™ Series -2dB E44 and E66 Owner’s Manual 0dB -6dB Power Switch. 1kHz This is the On/Off switch. The power status is +6dB +6dB indicated by an LED on the front of the cabinet. Balanced 0dB ACOUS SPAC -6dB INPUT ACOUSTIC TUNI Flat 80Hz 100Hz AC SELECT LOW CUTOFF POWER MID FREQ -4dB AC Select Switch. The input-power voltage is set at the 0dB -3dB to correspond with the country in which it was factory shipped.
2.2 Hookup Diagrams 2.2 Hookup Diagrams 2.2.
Eris™ Series E44 and E66 Owner’s Manual 2.2.
3.1 Monitor Placement 3 Tutorials 3.1 Monitor Placement Ideally, near-field monitors should be placed so that the tweeters are at the same height as your ears when you are mixing. Eris E44 and E66 speakers can be placed vertically or horizontally; when placed vertically, they should form a mirror-image pair, with the tweeters on the outside. When placed horizontally, the tweeters should be on top.
Eris™ Series E44 and E66 Owner’s Manual 60˚ 60˚ The speakers should be separated so that the tweeters form an equilateral triangle with your head. The monitors should be “toed in,” or angled, so that they are pointed at you, not pointed straight ahead. 3.1.1 Badge Rotation 180º range The logo badge on your Eris E44 and E66 can rotated to match their orientation in your studio.
3.2 Input Gain Setting 3.2 Input Gain Setting MIN U LOW CUTOFF INPUT GAIN MAX Flat 80Hz 100Hz -6dB MID ACOUSTIC SPACE +6dB -4dB -2dB 0dB -6dB HIGH +6dB ACOUSTIC TUNING 3.3 The best place to start is to set the Input Level control at its unity gain position (labeled “U”). That means the level of the signal reaching the amplifier is the same as the level of the signal entering the monitor’s input. This ensures a good, strong signal level without amplifying any extraneous noise.
Eris™ Series E44 and E66 Owner’s Manual EQ curve. On the other hand, if you want to emulate a cheap portable radio, try turning it up above 0. Try not to boost much, since this can add noise to the signal. The Low Cutoff control rolls off the low frequencies below the specified frequency (80 or 100 Hz). Engage this control if you are using a subwoofer in conjunction with the Eris E44/E66 monitors, and set it to the same frequency as the crossover to the subwoofer.
4.1 Technical Specifications 4 Resources 4.1 Technical Specifications INPUTS (E44 and E66) 1- Balanced XLR 1- Balanced ¼” TRS 1- Unbalanced RCA PERFORMANCE Frequency Response E44 E66 55 Hz to 22 kHz 45 Hz to 22 kHz Crossover Frequency E44 E66 2.9 kHz 2.4 kHz LF Amplifier Power E44 E66 50W 80W HF Amplifier Power E44 E66 35W 65W Peak SPL at 1M E44 E66 103 dB 106 dB LF Drivers E44 E66 dual 4.5” Kevlar dual 6.5” Kevlar HF Driver E44 E66 12 1.25” silk dome 1.
Eris™ Series E44 and E66 Owner’s Manual Input Impedance E44 and E66 10 kΩ USER CONTROLS Volume Range E44 and E66 A-type taper MF Control E44 and E66 Variable (-6 to +6 dB) HF Control E44 and E66 Variable (-6 to +6 dB) Low Cut E44 and E66 Flat, 80 Hz, 100 Hz Acoustic Space E44 and E66 Flat, -2 dB, -4 dB PROTECTION (E44 and E66) RF interference Output-current limiting Over-temperature Turn-on/off transient Subsonic filter External mains fuse POWER E44 and E66 100-120V ~50/60 Hz or 220-240V ~50/6
4.2 Troubleshooting 4.2 Troubleshooting No Power. First ensure that your Eris E44/E66 is plugged in. If it’s connected to a power conditioner, verify that the power conditioner is turned on and functioning. If problem still exists, disconnect the power cable from your E44/E66 and check the fuse on the back panel of your E44/ E66. The fuse housing is located directly beneath the IEC power cable connection. A blown fuse may look black on the inside or the wire inside might appear broken.
Eris™ Series E44 and E66 Owner’s Manual 4.3 Warranty PreSonus’s warranty obligations for this hardware product are limited to the terms set forth below: How Consumer Law Relates To This Warranty: THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE (OR BY COUNTRY OR PROVINCE). OTHER THAN AS PERMITTED BY LAW, PRESONUS DOES NOT EXCLUDE, LIMIT OR SUSPEND OTHER RIGHTS YOU MAY HAVE, INCLUDING THOSE THAT MAY ARISE FROM THE NONCONFORMITY OF A SALES CONTRACT.
4.3 Warranty Exclusions and Limitations: This warranty does not cover the following: 1. Damage caused by accident, abuse, improper installation, failure to follow instructions in the applicable owner’s manual or improper operation, rental, product modification, alteration, or neglect. 2. Damage from improper grounding, faulty wiring (AC and signal), faulty equipment, or connection to a voltage range outside published specifications (see applicable owner’s manual). 3.
How Long This Warranty Lasts: The Warranty begins on the original date of purchase from the retail purchaser and the duration is as follows: 1-Year Limited Warranty Product Category Model Transferable Recording Interfaces AudioBox iOne, AudioBox iTwo, AudioBox Stereo, AudioBox Studio, AudioBox USB, AudioBox VSL (1818, 44, 22), FireStudio Project, FireStudio Mobile, FireStudio Mobile Studio, Music Creation Suite No Pre-amplifiers ADL600, ADL700, BlueTube DP V2, DigiMax D8, Eureka, RC500, StudioChannel
3. The return authorization number as well as shipping instructions shall be provided after your service request is reviewed and confirmed. 4. The product should be returned for service in the original product packaging. Products may be shipped in a manufactured “flight” or “road” style cases but PreSonus will NOT cover any shipping damage to these cases. Products that are not shipped in the original product package or a manufactured case may not receive a warranty repair, at PreSonus’s sole discretion.
Exclusion of Damages: PRESONUS’S LIABILITY FOR ANY DEFECTIVE PRODUCT IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE PRODUCT, AT PRESONUS’S SOLE OPTION. IF PRESONUS ELECTS TO REPLACE THE PRODUCT, THE REPLACEMENT MAY BE A RECONDITIONED UNIT.
Dinner is Served Added bonus: PreSonus’ previously Top Secret recipe for… Rice Dressing Ingredients: •• •• •• •• •• •• •• •• •• •• •• •• 1lb ground beef 1 lb chopped chicken liver 1 onion (diced) 2 green peppers (diced) 4-6 celery stalks (diced) 2 garlic cloves (minced) ¼ C. chopped fresh parsley 3 C. chicken stock 6 C. cooked rice 1 Tbs. oil Salt and pepper to taste Cayenne pepper to taste Cooking Instructions: 1. 2. 3. In a large pot, heat oil on medium high and add meat, salt, and pepper to taste.
Eris™ Series E44 / E66 High-Definition MTM Studio Monitors Owner’s Manual 0dB -2dB -4dB E66 ACOUSTIC SPACE 20 800Hz ACOUSTIC SPACE 0dB MIN RCA Unbalanced INPUT GAIN U LOW CUTOFF MAX Flat 10kHz +6dB 0dB -6dB 80Hz 100Hz -6dB HIGH FREQ -2dB MID ACOUSTIC SPACE 1kHz +6dB 0dB -6dB Balanced +6dB -4dB -2dB 0dB MID FREQ -6dB -4dB HIGH +6dB 0dB -3dB INPUT ACOUSTIC TUNING Flat 80Hz 100Hz AC SELECT POWER LOW CUTOFF 100-120V~,50-60Hz,T2AL 220-240V~,50-60Hz,T1AL 160W ACOUSTIC SPACE 0d