AVB-D 16 16x16 AVB-to-Dante Bridge Owner’s Manual ® www.presonus.
Table of Contents 1 Overview — 1 1.1 Introduction — 1 1.2 About This Manual — 1 1.3 What’s in the box — 2 1.3.1 What Else You Need — 2 1.4 Companion PreSonus Products — 2 2 Connections and Controls — 3 2.1 Front Panel — 3 2.2 Rear Panel — 3 3 Network Setup — 4 3.2 Recommended Network Setup Example — 4 3.3 Managing Each Network — 5 3.4 Updating Firmware — 5 3.5 AVB Network Setup — 5 3.5.1 Method 1: Console Mixer Touch Display Setup — 5 3.5.
1 1.1 AVB-D 16 Owner’s Manual Overview Introduction 1 Overview 1.1 Introduction Welcome to a whole new world of possibilities! The AVB-D 16 is your bridge between an AVB network and Dante network. This 16x16 bridge converts 16 channels of audio from AVB to Dante and 16 channels of audio from Dante to AVB. It has a built-in asynchronous sample rate converter (ASRC) to ensure your media clock remains solid and reliable on both networks.
1 1.3 AVB-D 16 Owner’s Manual Overview What’s in the box 1.3 What’s in the box In addition to to a Quick Start Guide, your AVB-D 16 package contains the following: AVB-D 16 16x16 AVB-to-Dante bridge Power Supply 1.3.1 What Else You Need AVB Switch. The PreSonus SW5E AVB PoE Switch is fully compatible with all PreSonus AVB products and third-party AVB devices that adhere to the 1722.1 AVB standard. For a complete list of compatible third-party AVB switches, please visit www.presonus.com.
2 2.1 AVB-D 16 Owner’s Manual Connections and Controls Front Panel 2 Connections and Controls 2.1 Front Panel 1 2 3 4 5 1. Power LED. Illuminates when the unit is powered on and blinks when the unit is performing a firmware upgrade. 2. Reset Button. Press and hold for 5 seconds to revert the unit to factory firmware. 3. AVB Sync LED. Illuminates solid when the unit is receiving properly synced to AVB media clock and blinks if its not properly synced to AVB media clock. 4.
3 3.2 AVB-D 16 Owner’s Manual Network Setup Recommended Network Setup Example 3 Network Setup The AVB-D 16 bridges between two different audio network protocols: AVB and Dante. PreSonus recommends configuring each protocol as separate networks before using the AVB-D 16 to bridge them. This means that both the AVB and Dante networks should exist on their own switches and devices. Dante devices should not be connected to the AVB network switches and vice versa.
3 3.3 AVB-D 16 Owner’s Manual Network Setup Managing Each Network Managing Each Network 3.3 The AVB-16 D does not pass network data between the AVB and Dante networks, only audio. This means that managing network routing and clocking must be done independently. AVB network management for StudioLive Series III ecosystem products can be done from the Touch Display on the StudioLive Series III mixers or from UC Surface connected to the AVB Network using a Mac or Windows computer.
3 3.5 AVB-D 16 Owner’s Manual Network Setup AVB Network Setup 2. Select Audio Routing from the touch screen. Ch. 1 1 System User Profiles Audio Routing Utils Soft Power Capture FX A FX B FX C FX D Voume 0.5 dB Digital Patching Options TB Talkback Edit 3. Select Remote I/O Setup from the touch screen. Audio Routing EFFECTS MASTER MASTER CONTROL AVB Input Streams Remote I/O Setup Remote I/O Setup Earmix Setup FX A FX B FX C FX D Digital Patching EFFECTS MASTER 4.
3 3.5 AVB-D 16 Owner’s Manual Network Setup AVB Network Setup 7. Select the AVB Inputs button at the top left of the touch screen to route audio from the AVB-D 16 to the StudioLive Series III mixer.
3 3.5 AVB-D 16 Owner’s Manual Network Setup AVB Network Setup 5. Select the name to give the AVB-D 16 a unique name. This will be the name of the unit on the AVB side of the network. This name will not show on the Dante network. 6. Select the drop down menu for Outputs 1-8 (stream 1) to choose an AVB stream to send to the AVB-D 16. Note that you must have a stream connected here to ensure the AVB-D 16 D is receiving a proper media clock. Repeat for channels 9-16 (stream 2). 7.
4 4.1 AVB-D 16 Owner’s Manual Technical Information Specifications 4 Technical Information To mount your AVB-D16 to a rack shelf, use a M5x0.8 screw that is 6-10mm in length depending on the thickness of your shelf. 4.1 Specifications Digital Audio AVB Audio Network Port EtherCON™ AVB Audio Sample Rate 44.1kHz, 48kHz Dante Audio Network Ports (Primary and Secondary) EtherCON™ Dante Audio Sample Rate 44.1kHz, 48kHz, 88.
Dinner is Served Added bonus: PreSonus’ previously Top Secret recipe for… Andouille & German Red Cabbage Po-Boys Ingredients: • • • • • • • • • • 1 small Onion 3 Tbsp. fresh Ginger 1 small head Red Cabbage 1 tsp Salt 3 Tbsp. Honey ¼ cup Red Vinegar 12 oz Andouille or Bratwurst Sausage sliced lengthwise ¼ lb. Muenster Cheese Creole or German Mustard to taste 1 loaf French Bread Cooking Instructions: 1. 2. 3. 4. Heat 2 tablespoon vegetable oil in large skillet.
AVB-D 16 16x16 AVB-to-Dante Bridge Owner’s Manual ® 18011 Grand Bay Ct. • Baton Rouge, Louisiana 70809 USA• 1-225-216-7887 www.presonus.