Installation Guide

STEP ONE:
Set T-posts no more than 6ft apart for Economy Safety Barrier Fencing. 8ft apart for Standard Safety
Barrier Fencing and 10ft for Diamond Barrier Fencing. T-posts are recommend for solid installation,
but other posts such as Landscape Stake or rebar can come in handy for additional supports.
STEP TWO:
Attach the Safety Barrier fence to one T-post by using a zip
tie. Pull the Safety barrier fence taut and secure to each
post with zip ties. Be sure to secure the post at both the
top of the T-post to keep the fence from drooping and also
at the bottom of each T-post to keep the Safety Barrier
Fence close to the ground. This will help keep trash and
animals from entering the work area.
STEP THREE:
Be sure to utilize the “teeth” of the T-post keep the Safety
Barrier Fence from sliding down the post. This will help
secure the fence and improve the longevity of the fence.
TIPS:
Weaving rebar through the
grid of the fence and driving
it into the ground between
two T-post can help increase
the strength of the fence.
if T-posts are not available
and landscaping stakes are
used staples, in addition to
zip ties, can be used to secure
the fence to the stake.
If zip ties are not available
you can use Presco Barricade
tape or Roll Flagging as a
way to secure the fence to
the posts.
INSTALLATION GUIDE AND TIPS