User manual Premium HMI (pHMI) B Medical Systems S.à r.l. 17, op der Hei L - 9809 Hosingen Luxembourg | T +352 9207 311 | F +352 9207 31 300 | www.bmedicalsystems.com | VAT NO. LU 105 180 71 | REG. NO.
Table of contents 1) Important Information......................................................................................................... 3 2) Warnings and Cautions........................................................................................................ 3 3) Electrical connection ............................................................................................................ 4 4) Switching on/off ...................................................................
1) Important Information • Before using the devices, read these operating instructions carefully, including all the information on operation, safety, use and maintenance. • B Medical Systems does not guarantee any safety, if the appliance is used for any purposes other than the intended use or if any procedures other than those mentioned in this operating manual are used.
3) Electrical connection The pHMI is power by the +12V from CAN bus. Connections are already made during installation on end device. 4) Switching on/off 5) Login Spontaneous login can be done with a keycard by passing it near the NFC area. The antenna recognizes and reads all keycards. The read card id is compared to the existing id’s on the active user level. If the card is already in the list, a popup window for deletion shall be opened.
Data access mode: max output power conducted: max antenna gain: max output power ERIP: Read/Write -41.57 dBm 2.14 dBi -39.43 dBm Bluetooth: Operating modes: Operating frequency range: Number of channels: Channel bandwidth: Data rates: Hopping type: Modulation types: max output power conducted: max antenna gain: max output power ERIP: BDR, EDR 2402 MHz – 2480 MHz 79 1 MHz 432.6 kbit/s, 723.2 kbit/s, 2167 kbit/s FHSS GFSK, DQPSK 0.05 dBm 0.5 dBi 0.55 dBm B Medical Systems S.à r.l.
