Installation & Assembly

1) drain type and connection should be determined prior to installation.
2) we recommend using our color matched installation silicone (model: C900-orb) for the drain
installation. if you do not have this, you can use Clear 100% Silicone (Non-water based) purchased at
any hardware store. Using plumbers putty will create a “bulls eye” effect around your dark drain due
to the white color of the putty.
3) place your tub in the desired location. ensure that the floor is level and your tub is secure.
4) install drain according to the manufacturer’s instructions.4) install drain according to the manufacturer’s instructions.
5) install faucet according to the manufacturer’s instructions.
6) once installation is complete and silicone has dried thoroughly, fill up the tub to check for any leaks.