How to Guide

Take your tunes to the streets with a
sweat-proof, versatile, low impact,
universal Bluetooth in-ear design, that is
so small and comfortable, you almost
forget you’re wearing them.
Easy and smart operation with our one
touch multi-functionalities that lets you
switch between taking calls and
enjoying music to your smart phone.
Smart Wireless Earbuds
User Manual
Model #: P4001
Contents
• 1x Smart Wireless
Earbuds
• 1x USB Cable
• 1x Instruction Manual
• Eartips (S, M, L)
Features
• Dimensions: 31 x 0.9 x 0.39 inches
• Weight: 0.04 lbs.
• Talking time: 4 hrs
Music playing time: 3 hrs
Standby time: 40 hrs
• Charging time: 65 mins
Main Features
• Sweat-proof with inner earloops for comfortable wear
• Lightweight design only 0.04 lbs. (18 grams)
• Bluetooth® version 4.0
• Mic and Smart Multi-Function Button for hands-free call, Siri
and Google now access
• Rechargeable battery
• iOS & Android compatible
Bluetooth® Pairing
Press and hold the power button until you hear the start-up
chime. The red and blue LED lights will be alternately flashing
quickly white searching for a pairing compatible Bluetooth
device.
Switch on your Bluetooth® device and wait until “PRED Smart
Wireless Earbuds” shows up on your screen. When “PRED
Smart Wireless Earbuds” appears on your device, select and
pair.
When the pairing is complete, you will hear a message and the
blue LED light will flash slowly.
Easy operation
• Press once on the multi-function button to Answer/
Hang up Calls/Play/Pause
• Press twice on the multi-function button to Re-dial
• Press and hold the multi-function button for 2 seconds to
access Siri, Google Now
• Press and hold for 4 seconds multi-function button: Power
on/off
LED Indicator light
• Red and blue LED lights alternately flashing, shows that the
headset is Bluetooth® searching and in pairing mode.
• Slow flashing blue LED light indicates that the phone was
successfully paired.
• Steady red LED light while the device is charging.
Volume +/- and Forward /Back (During music mode)
• V+: Press and hold to up the volume, one press to forward;
• V-: Press and hold to down the volume, one press to backward;
Check the battery level
If you are on a call or listening to audio you will hear a tone when
the battery is low.
the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected
• Consult the dealer or experienced radio/TV technician for help
USA Regulations
This Device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
Canada Regulations
This device complies with Industry Canada Licence-exempt
RSS-210. Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interfer-
ence that may cause undesired operation of the device.
Manufactured and distributed by Pred Technologies USA Inc.
Product names, designations, and logos are trademarks or
registered trademarks of Pred Technologies USA Inc. All rights
reserved.
Customer Service Website:
www.predtechnologies.com
We recommend that you retain our address for future reference.
Product and colors may vary. Packaging created in San Diego
printed in China.
MADE IN CHINA.
CAUTION: Changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
For these purposes, the party responsible is:
Pred Technologies USA Inc.
7855 Prospect Street
Suite 310
La Jolla, CA 92037
1-858-999-2114
• Do not disassemble, modify, short circuit or heat the battery.
• Do not place it in fire or leave in a hot place.
• Only charge the battery with the specified USB cable.
• In the unlikely event of leakage or explosion, use sand or a
chemical fire extinguisher to extinguish.
• LiPo Battery must be recycled or disposed of properly.
• The Micro USB cable is tailor-made for the LiPo rechargeable
battery used in your Smart Wireless Earbuds. Do not use it to
charge any item other than the Smart Wireless Earbuds.
Note
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communi-
cations. However, there is no guarantee that interference will not
occur in a particular Installation. If this equipment does cause
harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is
encouraged to try and correct the interference by one or more of
Precautions
• Do not submerge the product in water.
• Keep device away from any heat source.
• Adjust volume to avoid damaging your hearing.
• Store and use in normal environments. Exposure to extreme
elements such as fire, water, or other extreme elements
may damage the unit. Do not handle with wet hands.
• Do not attempt to open or take apart this device.
The device will be damaged during that process.
• If the devices’s audio quality deteriorates, or a slight
‘popping noise’ is heard, it may be due to a low battery.
Please recharge the device.
• Only use a computer USB or the DC 5V power matching
the Micro USB Cable (included) to charge.
• Do not attempt to open or take apart this device.
This unit has no user serviceable parts.
• Do not put any foreign objects in the USB port.
• Charge the battery in an isolated area and keep
away from flammable material.
• Do not expose product to direct sunlight as it may result
in a risk of battery exploding, overheating, or igniting.
Charging
• Fully charge the Smart Wireless Earbuds prior to first use.
• Plug the Micro USB cable into the USB port.
• The red LED light will turn on to indicate the device is charging.
• The red LED light switching off indicates that charging is
complete.
Troubleshooting
No Sound:
• Make sure that the music player is working and that the Smart
Wireless Earbuds are charged.
• Make sure Bluetooth® is paired with the correct speaker.
Not Charging:
• Check to make sure that you are using the correct cable and
that it is fully plugged into both the device and the USB port that
you are charging from. Also check to make sure the source is
turned on.
WARNING! This equipment may experience difficulty and/or
memory loss when subjected to any electrostatic discharge,
radio frequency interference, or sudden power surge/interruption.
The user is encouraged to reset the equipment should any of
these occur.
Manufactured and distributed by:
Pred Technologies USA Inc.
All Rights Reserved.
Assortment No:P4001
Smart Wireless Earbuds
Ergonomic inner earloops
Superb sound isolation
Multi-function button
Hands-free microphone
Audio/phone controls
P4001US03CBF