User's Manual

ManualsBrandsPrecision ManualsElectronics2.4GHz WIRELESS DIGITAL TRANSMITTER

DW200C manual

Product Name：2.4GHz Wireless digital AV transmitter

Product Model：DW200C

1 Introduction

This mini size product adopt with an advanced microwave and wireless transfer

technology developed and manufactured by 2.4GHz wireless digital receiving

modules, which has a stable performance and strong anti-interference function.

This product can be used for wireless cameras to record wireless camera signals.

2 Main features..

2.1 Digital 2.4G wireless modules.

2.2 Support A/V output

2.3 Support AE and AWB

2.4 Transmission distance up to 100M ( open space )

2.5 M-JPEG format Compression

2.6 Support 2 times digital zoom

3 Camera Installation

3.1 DC 5V input

3.2 Pairing button

Press the Pair the button on camera and wait for a while, the monitor

which connected to the corresponding receiver will appear the image

from the camera that have matched. Pairing succeeded.

4 Troubleshooting

Symptom Remedy

The power does

not turn on.

z Check that the AC power cord is connected securely.

z (In case of power failure) Check the breaker.

No image display

on monitor

z Check if Monitor it is on and work under NTSC / PAL

model

z Check monitors video cable and connections.

Summary of content (3 pages)

PAGE 1
DW200C manual Product Name：2.4GHz Wireless digital AV transmitter Product Model：DW200C 1 Introduction This mini size product adopt with an advanced microwave and wireless transfer technology developed and manufactured by 2.4GHz wireless digital receiving modules, which has a stable performance and strong anti-interference function. This product can be used for wireless cameras to record wireless camera signals. 2 Main features.. 2.1 Digital 2.4G wireless modules. 2.2 Support A/V output 2.
PAGE 2
There is no sound. z z z z z z Interruption in Image and Sound z z Poor Reception Quality z Check camera video cable and connections. Confirm that the camera has power offered. Check if the audio output is well connected with monitor. If there is a microwave oven close by, turn the microwave oven off. You may have other units that run on the 2.4GHz signal. Move their base away from both the transmitter and/or the receiver Your home may have a metal frame that reduces the range of the unit.
PAGE 3
7. Antenna Requirent According to the FCC Part 15 Paragraph 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna to the intentional radiator shall be considered sufficient to comply with the provisions of this section. This product has a permanent antenna, fulfill the requirement of this section FCC NOTE: This device complies with Part 15 of the FCC Rules.