User's Manual

ManualsBrandsPrecision ManualsElectronics2.4GHz WIRELESS DIGITAL RECEIVER

CT404DM

user's manual

Product Name：2.4GHz Wireless digital receiver

Product Model：CT404DM

1 Introduction

This mini size product adopt with an advanced microwave and wireless transfer

technology developed and manufactured by 2.4GHz wireless digital receiving modules,

which has a stable performance and strong anti-interference function. This product can be

used for wireless cameras to record wireless camera signals.

2 What's included:

The following devices should be included in the box. Please check that you have them all

before installation.

A One receiver

B One power adapter for receivers

C One RCA cable

Summary of content (8 pages)

PAGE 1
CT404DM user's manual Product Name：2.4GHz Wireless digital receiver Product Model：CT404DM 1 Introduction This mini size product adopt with an advanced microwave and wireless transfer technology developed and manufactured by 2.4GHz wireless digital receiving modules, which has a stable performance and strong anti-interference function. This product can be used for wireless cameras to record wireless camera signals. 2 What's included: The following devices should be included in the box.
PAGE 2
3 Main features. 3.1 Support up to 4 cameras synchronous. . 3.2 Digital 2.4G wireless modules. 3.3 Support A/V output 3.4 Support AE and AWB 3.5 Support OSD screen-controlled operation 3.6 Support 4 Channels display in Quad 3.7 Support automatically channels switch 3.8 Transmission distance up to 100M ( open space ) 3.9 M-JPEG format Compression 3.
PAGE 3
4 Buttons 4.1 Mode switching Switch from quad mode to single channel mode 4.2 Pairing Pairing the cameras and receiver 4.3 Menu OSD menu display 4.4 Auto Scan Switching the channels automatically with set time interval 4.5 Right/CH2 Move to the Right / Switch to Channel 2 4.6 Up/CH1 Move Up / Switch to Channel 1 4.7 Manual Scan Switching the channel manually 4.8 Down/Ch3: Move Down / Switch to Channel 3 4.9 Left/CH4 Move to the Left / Switch to Channel 4 4.
PAGE 4
5 Back panel 5.1 DC 5V/9V input 5.2 A/V output 6 Menu Enter the Menu option to setup the main feature of this product. Through Right/Left button can adjust parameters, and through Up/Down button can select the features to set. 6.1 ZOOM in: Select ON/OFF to enable the zoom in function. This product can support zoom in the images for 2 times. 6.2 SCAN TIME： In this option can setting the intervals for switching channel automatically. 5 seconds ~20 seconds, time for interval for scanning. 6.
PAGE 5
6.5 PAIR: In this option you can pair the cameras with the specific channels, press the Pair button, through the Right/Left button can choose the channel; one channel can only pair with one camera. After selecting the specific channel and press the pair button there will appears the matching information as follows: Press the Pair the button on corresponding camera and wait for a while, the monitor which connected to the receiver will appear the images from the cameras that have matched. Pairing succeeded.
PAGE 6
z Confirm that the camera has power offered. z There is no sound. z Check if the audio output is well connected with monitor. z If there is a microwave oven close by, turn the microwave oven off. Interruption in z You may have other units that run on the 2.4GHz signal. Move their base away from both the transmitter and/or the receiver Image and Sound z Your home may have a metal frame that reduces the range of the unit. Contact your SVAT customer service for more information z improves.
PAGE 7
Digital zoom 2 times Four split-screen Transmission yes 100M（test in the open air） distance OSD menu yes 9 Notes 9.1 This product can not be folded, pressed or impacted. 9.2 The repairing of this product can only be done by the Professionals. 9.3 The parts of this product can not be open by non-professionals. 9.4 This product can not be used in high temperature environments. 9.
PAGE 8
10 Antenna Requirent According to the FCC Part 15 Paragraph 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna to the intentional radiator shall be considered sufficient to comply with the provisions of this section. This product has a permanent antenna, fulfill the requirement of this section FCC NOTE: This device complies with Part 15 of the FCC Rules.