1. Installation 1.1 System Requirements Determine that your PC, notebook, tablet, „Handheld“ or similar is on the hardware side already Bluetooth-enabled. In this connection this keyboard is then compatible to all systems supporting the Bluetooth HID-profile correctly. 1.2 Preliminaries Ensure that the accompanying Bluetooth driver software, which belongs to your used Bluetooth component (integrated Bluetooth module respectively external Bluetooth dongle receiver) is or was installed correctly on your PC.
1.3 Installation of keyboard Ensure for the further procedure that the used Bluetooth driver software (as described under 1.2) was installed correctly on your PC. 1.3.1 Keyboard installation under Bluetooth driver software BlueSoleil • Left-click the Bluetooth icon in the system tray area of PC. Fi 1 • Now opens the menu window of BlueSoleil software. • After opening the menu turn the sliding switch back side of the keyboard to ON position and afterwards press 1× the Pairing button.
• You will find a red tick in system tray. Please click the keyboard icon by using the right button of mouse, and tap Fi 5 Connect ÆBluetooth Human Interface Device Service Then you should be able to find a message Connected in status bar. Now you can use this Bluetooth keyboard to input the data into your computer.
• You'll be prompted with a PIN code for pairing between your PC and your Fi 11 keyboard. Please enter exactly the same PIN code on your Bluetooth keyboard and confirm with OK. • After input appears a red tick near the Fi 12 keyboard icon. Fi 13 • Right click the icon to choose Connect Device. • Confirm the appearing request with YES. • After the Bluetooth keyboard is paired with your computer, you will get this green indicator icon.
• Reconnecting-LED It is used to indicate that the Bluetooth keyboard is reconnecting to the already founded Fi receiver after waking up or power up via the accordant authority (registered password or PIN). 18 • Battery Low-LED It is used to indicate that the battery is below 2.4 Volts. It keeps on until new battery is installed Fi 19 or the battery is total used up. It is flashing only while the keyboard is not in sleep mode. 2.