User's Manual

ManualsBrandsPrecise Biometrics ManualsElectronicsCombined Finger Print and Smart Card Reader

Table Of Contents

Precise 200 Series Quick Reference

Precise 200 Series Quick Reference

Using the Precise 200 series reader

General Information

The Precise 200 series readers - Precise 200 MC and Precise 250 MC - require the Precise 200 Series Drivers to be installed on the

computer to work. See the “Installation of the Precise 200 series reader” section for more information about installation.

Correct finger placement

Correct and consistent finger placement is crucial for success.

• Try to capture the center of the fingerprint

ο Position the cuticle level with the center of the sensor

ο Touch the small nubs above the sensor (when available)

• Avoid rotating the finger

• Place the finger flat to the sensor

• Press with medium pressure

Enhancing the fingerprint image quality

If your finger is very dry

• Try to press more firmly

• Moisten your finger by breathing on it

If your finger is very damp

• Try to press less firmly

• Wipe your finger dry

More tips

• Try placing your finger the way you did during enrollment

• Keep the sensor surface clean

ο If necessary, use a cotton cloth to clean the surface

ο Do not use paper tissues for cleaning, they may scratch the surface

• If your fingerprint is still not recognized, please consider re-enrollment to get a better matching template

Installation of the Precise 200 series reader

General information

The Precise 200 series readers require the Precise 200 Series Drivers to be installed on the computer to work. The Precise 200 Series

Drivers package is available for free downloading from Precise Biometrics’ Web site,

www.precisebiometrics.com/downloads. The

Precise 200 Series Drivers are also downloadable for Windows® Update,

http://windowsupdate.microsoft.com, or may also be

bundled with an application that uses the Precise 200 series reader.

System Requirements

•

Windows® XP, Windows® 2000, Windows® 2003

• Minimum 300 MHz Pentium processor.

• USB port

Installation of a Precise 200 MC or Precise 250 MC reader

1. Install the Precise 200 Series Drivers.

Run the setup file in the Precise 200 Series Drivers package or follow installation instructions in the application

that bundles the Precise 200 Series Drivers.

2. Connect the reader

Connect the Precise 200 MC or Precise 250 MC reader to the USB port on the computer and the reader

will now work.

Summary of content (2 pages)

PAGE 1
Precise 200 Series Quick Reference Using the Precise 200 series reader General Information The Precise 200 series readers - Precise 200 MC and Precise 250 MC - require the Precise 200 Series Drivers to be installed on the computer to work. See the “Installation of the Precise 200 series reader” section for more information about installation. Correct finger placement Correct and consistent finger placement is crucial for success.
PAGE 2
Maintaining the Precise 200 series reader • • • • • • • • Protect the Precise 200 series reader from any kind of physical damage. Ensure that you are electrostatic discharged before putting the finger on the sensor. High electrostatic discharges might damage the fingerprint sensor. Keep the sensor surface clean or there is an increased risk that the fingerprint can’t be successfully matched. If necessary, clean the surface with a clean cotton cloth. You can dampen the cloth slightly with a cleaner.