INDEX Precise Sense™ reader series User Reference Guide 1. Introduction 2. Installation 2.1 Installation information 2.2 System requirements 2.3 How to install 3. Maintenance 4. Using Precise Sense™ 4.1 Enhancing image quality 4.2 Correct finger placement 5. Product warranty 6. Electromagnetic compatibility 7.
1. Introduction 2.1 Installation information The Precise Sense™ series readers: The Precise Sense™ series readers requires drivers to be installed on the computer to work. • Precise Sense™ MC • Precise Sense™ MC-S • Precise Sense™ CL • Precise Sense™ CL-S • Precise Sense™ X • Precise Sense™ X-S These readers require the correct drivers to be installed on the computer to work. See the “How to install” section for more information.
2.3 How to install 1. Install the Precise Sense™ series drivers. Run the setup file in the Precise Sense™ series drivers package or follow installation instructions in the application that bundles the Precise Sense™ series drivers. 2. Connect the reader Connect the Precise Sense™ reader to the USB port on the computer and the reader is ready to be used. 3. Maintenance • Protect the Precise Sense™ series reader from any kind of physical damage.
.1 Enhancing image quality 4.2 Correct finger placement If your finger is very dry: Correct and consistent finger placement is crucial for good biometric performance. • Try to press more firmly • Breath on your finger If your finger is very damp: • Try to press less firmly • Wipe your finger dry Make sure that the depicted area is captured More tips • If you have enrolled already - try placing your finger the way you did during enrollment.
Finger placement for swipe sensors Precise Sense™ MC-S, Precise Sense™ CL-S, Precise Sense™ X-S Swipe your finger flat on the sensor with constant speed. Follow the guiding rail. Do not use your fingertip or lift your finger while swiping Do not rotate your finger when swiping Finger placement for touch sensors Precise Sense™ MC, Precise Sense™ CL, Precise Sense™ X Place finger flat on sensor.
5. Product warranty 6. Electromagnetic compatibility Please be informed that this Precise Sense™ series reader is covered by a limited product warranty pursuant to which this Precise Sense™ series reader will be free from defects in design, materials and workmanship for a period of twelve (12) months from the time of delivery from Precise Biometrics to the Precise Biometrics partner from which you purchased this Precise Sense™ series reader (the “Partner”).
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
7. General information The information in this Quick Reference is protected by copyright and may not be reproduced in any form without written consent from Precise Biometrics. The information in this Quick Reference is subject to change without notice. Precise Biometrics shall not be liable for any technical or editorial errors herein, nor for incidental or consequential damages resulting from the use of this Quick Reference. Copyright © Precise Biometrics, 2011 www.precisebiometrics.