Safety Notice Before using this product, please read the below safety notice carefully. This will help to extend the product’s lifecycle, and make it work normally. When IA2TV is working, please make sure its ventilation system is working. The power adapter is dissipating heat during normal use, please be sure not to cover it and keep it away from your body to prevent discomfort or injury by heat exposure. Keep the iA2TV in a well-ventilated area, away from excessive light, heat, or moisture.
Please don’t disassemble this product by yourself. Any disassembly not approved by the original manufacturer may result in malfunction, and void warranty. If the IA2TV is not operating properly or has been dropped or damaged, contact your product’s authorized dealer, reseller, or service provider. Never push objects of any kind into cabinet slots or other openings. DO NOT use the USB connector to connect the power or Mobile hard disk better.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Table of Contents Safety Notice ......................................................................................................... 1 Care and Cleaning................................................................................................. 2 FCC ...................................................................................................................... 3 ICES ...................................................................................................................... 3 1.
2.2 Connecting the IA2TV.................................................................................. 12 2.3 The Indication of Status Lights .................................................................... 15 3. IA2TV Windows Control Program...................................................................... 16 3.1 P2P and LAN ............................................................................................... 16 3.2 Playing and Watching ................................................
1. Introduction With IA2TV, a portable wireless multimedia player, you can enjoy your favorite movies, music, digital photos and pictures from your Desktop (DT) or Notebook (NB). 1.1 What’s in the Box IA2TV AC Adapter CD Video cable Audio cable Notice: The CD includes the installation package of IA2TV Windows Control and IA2TV User’s Manual.
1.2 What You Need To start using your IA2TV, you need the followings: (1) Network WiFi and wireless AP (2) TV (3) Computer and Software To play multimedia files from PC on TV, your PC must install the IA2TV Windows Control, and the system requirements are better to meet the followings: A DT or NB with Windows XP SP2 or Windows 7, CPU 1.6GHZ, DRAM 2GB, WiFi 802.11b/g/n Notice: If P2P mode, not necessary router.
1.
2. Setting up IA2TV This chapter will teach you how to place and connect IA2TV to your TV. 2.1 Placing the IA2TV 2.1.1 On the Desk If there’s enough space on your desk, you can simply put your IA2TV on the tabletop. 2.1.2 On the Wall Use the following method can save your space best.
(1) Use the two screws and plastic plugs to fasten the wall mount onto the wall as shown below.
(2) Fit the IA2TV into the wall mount with ports locating at the bottom for easy connecting.
2.2 Connecting the IA2TV (1) Connect IA2TV and TV Using the included video cable with yellow, white and red connectors to plug in the component video ports of your TV, and the other end will be plugged in AV OUT port of IA2TV.
(2) Connect IA2TV and Satellite Speakers Using the included audio cable with red and white connectors to plug in the component audio ports of your satellite speakers, and the other end will be plugged in AUDIO OUT port of IA2TV.
(3) Connect the Power Cord Connect one end of the AC adapter to the DC IN port of the IA2TV, the other end to the power outlet, and then push the power button to start it.
2.
3. IA2TV Windows Control Program You must install IA2TV Windows Control Program from the included CD in your PC first. And then use this software to play videos, music or photos on TV through your IA2TV. 3.1 P2P and LAN With IA2TV, you can choose P2P mode to play the multimedia files from your PC on TV. If your PC and IA2TV are under the same router, you can also choose LAN mode to play the multimedia files from your PC.
3.2 Playing and Watching 3.2.1 Local Shared Folder Settings First running the IA2TV Windows Control, it will appear the below window, and you can add folders with multimedia files which you want to play to the folder list. You can also click to add or delete folders with multimedia files which you want to play or not on TV.
3.2.2 Playing in P2P or LAN Mode After setting the folder, click and it will appear a prompt box, choose OK and then the IA2TV will be found automatically, double click to go to the multimedia files. If there’s no IA2TV, please check it was in P2P mode or not. Notice: If you want to switch to the LAN mode successfully, you should both switch the LAN in your PC.
3.2.3 Playing Multimedia Files With IA2TV Windows Control, you can play the multimedia files from your PC on TV.
The functions of the icons are shown as belows: Icon Function Icon Function Setup IA2TV Shuffle Play Display the capture mode of your PC on TV Pause Display in full screen Play the previous file Restore the original size of screen Play the next file Return to pre-page Decrease the volume Help Increase the volume Transfer to this mode to play videos only Volume Transfer to this mode to play music only Single repeat Transfer to this mode to play images only All repeat - 20 -
3.3 Settings With IA2TV Settings, you can rename your IA2TV, setup your wireless network, choose TV mode, Upgrade Windows Control and IA2TV firmware. 3.3.1 System Message The system information will show the name of your IA2TV and the connection to rename your IA2TV. mode.
3.3.2 Wireless (1) Choose “LAN” or “P2P” mode of the IA2TV. (2) Click or to delete or add a router.
(3) Input the password when you add a new router. (4) Choose one router and input the password, then click connect it.
3.3.3 TV Mode There are two TV modes in IA2TV: PAL and NTSC. PAL is used in China, while NTSC is in America, Taiwan, Korea and so on. Click ▼ and choose one TV mode. 3.3.4 Remote Upgrade First download the latest version of IA2TV Windows Control and firmware at www. ia2tv.com, then go to IA2TV Settings, click > “Remote Upgrade” and choose the files downloaded to upgrade.
4. Troubleshooting If your TV screen appears fuzzy or black Use the correct video cables. Make sure video cables are connected firmly to IA2TV and to your TV. Make sure the input setting you’ve selected on your TV matches the input your video cables are connected to. Select a video mode which your TV supports. If IA2TV doesn’t appear in TV Make sure IA2TV is turned on. If IA2TV doesn’t play your photos Make sure you have photos in a folder on your PC.
to or will only appear and play music or video files. If IA2TV connect failed Make sure IA2TV and your PC are both in the same router. Make sure IA2TV and your PC are both in P2P mode or LAN mode. IA2TV is in sleep mode or rebooting. The signal of the wireless network may be too weak.
5. Specifications Dimension Resolution Wireless Video out Audio out USB TV mode Power P2P Video format Audio format Image format 10.36cm × 6.41cm × 2.1cm 720 × 480 @30fps (NTSC) 720 × 576 @25fps (PAL) WiFi 802.11 b/g/n, w/ AD-HOC 3.5mm AV out RLC Jack 3.5mm Audio out Jack USB 2.0 NTSC/ PAL Input: 110-240V Output: 5V @1A Switch P2P to LAN mode .wmv, .asf, .rm, .rmvb, .avi, .mp4, .3gp, .mov, .flv, .mkv, .mpg .mp3, .wma, .wav .jpg, .bmp, .