0
Table of Contents KNOWING YOUR DEVICE 3 DEVICE SPECIFICATION 5 BASIC INSTALLATIONS 6 GUIDELINE FOR INSTALLING SIM/SAM CARD GUIDELINE FOR INSTALLING MICRO SD CARD 6 7 FIRST TIME USE 8 SCREEN CALIBRATION TIME, DATE AND TIME ZONE CONFIGURATION 8 8 TOUCH SCREEN OPERATIONS 9 USING THE STYLUS 9 START MENU 10 SHELL TASKBAR 11 THE TASKBAR APPEARS ON THE TOP OF YOUR HRT700 SCREEN.
AUDIO VOLUME STYLUS PROPERTIES NETWORK & DIAL – UP CONNECTION REGIONAL SETTING OWNER PROPERTIES PC CONNECTION STORAGE PROPERTIES SYSTEM PROPERTIES PASSWORD PROPERTIES SCREEN ROTATION TASKBAR & SECURE SHELL BLUETOOTH DEVICE PROPERTIES INPUT SELECTION PANEL DATE & TIME PROPERTIES INTERNET OPTIONS REMOVE PROGRAMS 20 21 21 22 22 23 24 24 25 25 26 26 27 27 28 28 INTERNET EXPLORER 29 FEATURES 31 WIRELESS LAN (WI-FI) USAGE BLUETOOTH USAGE GSM USAGE USING THE CONTACT CARD READER USING THE FINGERPRINT SENSOR U
Knowing Your Device FRONT 3
TOP BOTTOM BACK SIDE 4
Device Specification SYSTEMS Memory Memory Expansion Device Operating System Host PC Operating System Programming Language 256MB DDR-2 RAM, 4GB Flash 1 x micro-SD Memory Slot (Support up to 32GB) WinCE 6.0 Windows® 7/ Vista/ XP C++ Programming, NET Programming in Microsoft® Visual Studio 2005 COMMUNICATION INTERFACES Bluetooth Wireless LAN Network USB Bluetooth Version 2.0 IEEE 802.11 b/g Wi-Fi 3.5G - W-CDMA, 850,900, 2100 MHz GSM/ GPRS/ EDGE (1 X SIM Slot) USB Client 1.
Basic Installations Charge the Battery Your battery has been partially charged at the factory, but you may need to recharge it for 4 hours before you can switch on your device for the first time. Guideline for Installing SIM/SAM card When you subscribe to a Cellular Network, you are provided with a SIM card loaded card loaded with your subscription details (PIN, optional services available and etc). WARNING Keep all SIM cards out of the reach of children.
) Push down the SIM slot cover and slide outward to lock it 9) Place the battery pack followed by battery cover 10) Push the wing lock to secured the battery cover and finally install back the hand strap To insert the SAM cards 1) It will be the same as inserting the SIM card, but on the others three slots 2) SAM card is for internal security Guideline For Installing Micro SD Card 1) Firstly closed all the programs and switch off the unit 2) Removed the hand strap 3) Unlock both wing lock 4) Removed the b
First Time Use Screen Calibration Once the charging has completed, turn on the unit by pressing the power button. On the first time basis, it is advisable to calibrate the screen by going to: Start -> Settings -> Control Panel -> Stylus. Carefully press and briefly hold stylus on the centre of the target. Repeat as the target moves around the screen. Press ESC key to cancel Follow the cursor and tap on it.
Touch Screen Operations The following defines the various operations that you can perform with the stylus. Tap Touch the screen once with the stylus to select items or options Double Tap Drag Tap the item twice to open or execute a program Hold the stylus on the screen and drag across the screen to select text and images.
Start Menu Your HRT700 is pre-installed with a collection of useful programs. These include Microsoft WordPad and customized programs. You can select the program you want from the Start button or by tapping on the screen; a list of customized programs will be shown. Taskbar Items The Control Panel includes the following standard items which allow user to customize system wide properties.
Shell taskbar The taskbar appears on the top of your HRT700 screen.
Software Input Panel (SIP) On the taskbar of the HRT700, tap on the SIP icon. The software input panel will be shown at the bottom of the screen. Tap on the SIP icon again in order to hide the software input panel.
Keypad Learning to use your keypad is easy. This section will describe the basic concept of using the keypad in writing a message or executing a task like increasing volume. Controls and Interfaces Clear entry or Backspace function Keypad input mode Power on, Wake or Suspend Nav. Left & Right Alpha Numerical Keypad Enter ● Nav. Left & Right Press to go to the left or right. Selecting the left or the right item / icon.
Customizing your HRT700 You can customize your setting of your HRT700 to suit your particular needs. E.g. Setting password, so that nobody can use your handheld or change the background display and etc.. Tap on Start -> Settings -> Control Panel, as shown on the previous page. In the menu, it contains icon showing different settings that can be customized.
LCD Brightness Control The unit can be powered by either battery or external power. Users may change the brightness of the LCD backlight through the backlight control panel applet according to the power mode. Adjusting Display Brightness Use the following operations to adjust display brightness to make it easier to read. Tap and click Settings and choose Control Panel. On the Control Panel, tap Dimming Setting. A screen box will appear. Make sure it is on the LCD Light tab.
Adjust How the Screen Light can be Turned On Tap and click Settings and choose Control Panel. On the Control Panel, tap Dimming Setting. Select the LCD Light tab. Below the Brightness Change option, there is two more option for screen light setting. Select Touch screen or Keypad in order to turn on the light of the LCD by touching either the touch screen or keypad, or select Touch screen only to turn on the light of the LCD by touching the screen only.
Keypad Light Control Adjust Light Emitting Duration for Keypad Tap and click Settings and choose Control Panel. On the Control Panel, tap Dimming Setting. Select the KeyPad Light tab. Select duration from 3 seconds to 30 seconds, as after that selected duration, the keypad light will be off. Adjust How the Keypad Light will be Turned On Tap and click Settings and choose Control Panel. On the Control Panel, tap Dimming Setting. Make sure the KeyPad Light tab is selected.
Power User may check the power status of the main battery by clicking on the power icon. In the power properties menu, for the Battery tab, user may check on the option to Always show icon on the taskbar. Another option that user may check on is to Show critical battery Warning, which means a window will be popped out when the device is low battery. System Power States The OS have 4 different power states that will be the four states of the internal power manager state machine.
Display The resolution for the device is 640x480. User can customize the screen display by changing the picture on the Display Properties. Or user may insert new picture just by transferring it from any personal computer. User may select the Display Properties by holding the pointer on the desktop, and then select Properties or go to Start -> Settings -> Control Panel -> Display Properties. User can tile desired image on the display property.
Keyboard In the Keyboard Menu, you can set two things: repeat delay and repeat rate and an option to check on whether to Enable character repeat or not. Audio Volume When you choose the Volume and Sound properties, on the first page you can set the volume of the speaker and enable sounds for certain warning or applications. On the Volume tab, user can set the volume of the sound. When you click on Sound page, user can customize the window events’ sound.
Stylus Properties In this Stylus Properties, user can recalibrate the sensitivity of the stylus as well as checking on the mouse double-tap setting. Network & Dial – Up Connection When tapping on the Network and Dial-up Connection, a default connection will be created as “USB ActiveSync”.
Regional Setting On the Regional Setting, user can set your local, language, number, current time and date accordingly. Owner Properties On the Owner Properties, user could insert their own personal information and network ID. This depends on user’s preferences.
PC Connection PC Connection is to enable the unit to directly communicate with personal computer or other communication devices. The default is set to USB ActiveSync. However, if there is more than one connection being created on the "Network and Dial-Up Connection", user need to change the connection setting before any of the communication devices can be linked, e.g. IrDA.
Storage Properties Go to Start -> Settings -> Control Panel -> Storage Manager. In the Storage Properties, user can manage the storage by formatting it, dismounting it or create new partition on it. System Properties In the System Properties, it will show the user the system information, device name and copyrights.
Password Properties User can set the Password to maintain privacy or prevent people from reading the HRT700. Screen Rotation This feature allows user to rotate the screen display. It is useful for viewing landscape picture.
Taskbar & Secure Shell Allow user to set the Taskbar and Secure Shell feature. Secure Shell enables user to control accessibility of Control Panel. The default password is “123456”. Bluetooth Device Properties Allow user to scan and pair with connecting Bluetooth devices. The HRT700 Bluetooth feature must be turn on for it to scan. For turning on the Bluetooth, please refer to the manual below.
Input Selection Panel Allow user to change current Input Panel state: Large KB. Single tap on the SIP at the taskbar will activate the input panel selection. Date & Time Properties Allow user to configure the date, time and time zone. It also comes with the daylight saving features.
Internet Options Allow user to configure the network connection setting and the default homepage. Remove Programs Allow user to remove installed programs systematically.
Internet Explorer Internet Explorer makes it easier to get the most from the World Wide Web, whether you are searching for new information or browsing through your favorite Web sites. In the control panel menu, under the internet option, user may customize the appearance of the browser when the program is launched. User may also customize other options relating to connection, security and advanced. The start page of Internet Explorer.
User could also go to a webpage, by typing the internet address – for example, www.PRADOTEC-GLOBAL.com.my in the address bar and then click the Go button. The Back and Forward buttons will enable user to return to the previous page or view the next page. The stop button will enable user to stop viewing a page when the webpage is taking too long to open. When receiving a message that a web page cannot be displayed or to make sure you have the latest version of the page, click the refresh button.
Features Getting Connected All the features and peripherals of HRT300 can be accessed and enabled by getting into the Power Control screen. The following pathway would lead the user to the Power Control screen. Start -> Settings -> Control Panel -> Power Control Wireless LAN (Wi-Fi) Usage HRT700 has built in wireless LAN which enable user to access Internet by accessing available wireless provided at public areas, company or home.
The network icon will popped up on the shell taskbar. Double tap on the icon to configure the WiFi network properties. On the Wireless Information tab, check on the Notify me when new wireless networks are available. Select the preferable network, press Connect and a Wireless Network Properties window will be popped out. Enter the Network key if the network autentication is enable, else press OK. The icon before the Network name will be changed; it shows that the device is connected to the network.
Bluetooth Usage Bluetooth Manager allows user to scan, pair and link with other Bluetooth devices. The Bluetooth feature of the device must be turned ON in order to do the scanning. For the steps on turning ON the Bluetooth feature, please refer to the manual below. To access Bluetooth function, go to Start -> Settings -> Control Panel -> Power Control and press once on the Bluetooth icon to activate it.
User may scan and pair with other Bluetooth devices such as mobile phones, PCs, laptops and etc. In order to connect to another device, user needs to scan for the device first. Make sure the other Bluetooth device which wish to be connected is in the coverage. 1) Go to Start -> Settings -> Control Panel -> Bluetooth Manager. . 2) After that, an icon will appear at the taskbar. 3) Single tab on the icon, to continue 4) The Bluetooth Manager window will appear as below.
The device does not make any connection to any device 5) Make sure the device that wishes to be connected is at the coverage area. Press Scan to start scanning. 6) Press STOP if does not wish to continue scanning. Or else, wait until the scanning process to complete. STOP button will change back to Scan button after the scanning process is complete. Wait for STOP to change to Scan, else the scanning process is incomplete. It changes to Scan, which means the scanning process is completed.
7) Select the device that wish to be connected. Press Connect 8) A Print UI window will be popped up if the channel is not stated. Insert channel between 1 to 30, less than 1 or more than 30 are bad channels. Then press OK. Channel between 1 to 30 9) An Authentication Request window will be popped up. Enter the same PIN for both devices. Once the device is successfully connected, a Success window popped up. Press OK, the dialog will be ended automatically but the icon on the taskbar remains.
10) Click once on the Bluetooth Manager icon, if wish to check on the connection. Unavailable means that there is a device connected to this device by Virtual COM This is the address and channel of the device that is connected to the device 11) Click once on the Bluetooth Manager icon, to reopen the dialog. A device is connected to this device by Virtual COM. In order to connect with other device, this device needs to be disconnected with the current device to continue further. Press Disconnect.
12) Please make sure that the Bluetooth Manager icon remained at the taskbar. If the icon disappeared, launch the program again. There are few scenarios that the taskbar icon may disappear: Exit button is pressed. This will cause the entire application to close Soft reset button is pressed. All the running application will be exited. 13) If the device is suspended, make sure the Bluetooth feature is turned ON after turning on the device.
GSM Usage To access GSM function, go to Start -> Settings -> Control Panel -> Power Control and press once on the GSM icon to activate it. Icon is Green – ON Icon is Red – OFF The GSM status will be displayed on the GSM icon at the top right of the device. First, in order to know the service and coverage of GSM, go to Start -> Settings -> Control Panel -> Taskbar Setting. Check on the Show GSM icon on Taskbar. If there is no SIM card inserted into HRT700, there are two icons showing on the taskbar.
HRTSeries While the GSM module is configuring, this icon, - GSM OFF will appear on the taskbar or while the SIM card is inserted but GSM module is not turned ON. After the GSM module is configured, two new icons will be appearing on the taskbar. Both of the icons show the status of the GSM module of the HRT700.
Using the Contact Card Reader 1. There are 4 slots that are available. For smart card, user may insert the smart card into slot 1 which is located at the top most of the device. 2. Slot 0, 2 and 3 is specifically designed for SAM. These 3 slots are located at the back of the device, behind the battery. SAM A (Slot 0) SAM B (Slot 2) SAM C (Slot 3) Using the Fingerprint Sensor 1. When the optical finger print sensor is ready, the sensor window will light up. 2.
Using the Printer 1. Push down the Printer knob to open the printer cover 2. Unlock the printer cover and rotate the cover towards top side to open it. (A) 3. Place the paper roll into the housing as shown in figure (B) 4. Hold the extreme end of the paper roll by keeping a few centimetres of thermal paper out of the paper roller from the printer cover(C) 5. Ensure paper in its proper place and gently close the printer cover.
Appendix: Troubleshooting Guide Reset the HRT700 and clear memory To Reset the HRT700 If your HRT700 responds slowly, stops responding as expected, or “freezes”, try resetting it. A reset causes the HRT700 to restart and re-adjust its memory allocation. Any unsaved data in the open windows may be lost. ● Use the stylus to press the Reset button. Restore to Factory Setting 1. Turn the HRT700 ON. 2. Press and hold the Side Button (right) button, and use the stylus to press the Reset button.
If HRT700 runs out of Power Low Battery Power When batteries are running low, you will see a low battery icon in the navigation bar. Replace or recharge the batteries as soon as possible. Running on low battery power will affect the device’s peripheral performance. Hence, the device will automatically shut down when the battery power is critically low. Under normal conditions, a fully charged battery can be used for long hours. Here are a few tips to help you get the most from them.
If HRT700 runs out of Memory Memory on your HRT700 is shared between storage memory and program memory. Storage memory is used to store the information you created and programs you installed. Program memory is used to run programs in your HRT700. The HRT700 automatically manages the allocation between storage and program memories. However, in some situations, such as when memory is low, the HRT700 may not be able to automatically adjust the allocation.
Screen is Dark Prolonged exposure to direct sunlight may cause your HRT700 screen to be temporarily dim. This is a normal case for LCD screens and it is not permanent. Inaccurate Response to Stylus Taps Adjust the touch screen to respond more accurately to screen taps. Tap and then Settings. On the Control Panel, tap Stylus. In the Stylus Properties, choose Calibration. Tap “Calibrate” and follow the instructions on the screens as shown below: Slow or no response Reset the HRT700.
Routine Maintenance This section provides recommended guidelines for taking care of your HRT700. Following these guidelines helps to ensure the lifespan of your HRT700 and reduces the risk of damage. Routine Care To keep your HRT700 in good condition and working properly, follow these guidelines: ● ● ● ● Keep your HRT700 away from excessive moisture and extreme temperature. Do not expose your HRT700 to liquids or precipitation. Do not place anything on top of your HRT700 to prevent damage to the screen.
Travel Guidelines For safety and convenience when traveling with your HRT700, follow these guidelines: ● ● ● ● ● ● Back up your data before you leave. Take a backup copy of your data with you. Disconnect all external equipment from your HRT700. Take the AC adapter and new batteries with you. Hand-carry your HRT700 in a protective case. Do not check in with your luggage. Beware of potential effects of airport security devices on your HRT700.
FCC STATEMENT : This device (FCC ID:SX3-HRT700)complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.