Quick Start Guide

Poynt Card Reader
Safety & Regulatory
Package Contents
Device X 1
USB-C Cable X 1
Charging Dock X 1
Quick Start Guide X 1
Product Specifications
Model # • CHB30
Functions • EMV chip card reader
(ISO 7816 compliant class A, B, C card)
• Triple Track Magnetic Stripe Card Reader
• NFC Card Reader (EMV contactless,
ISO 14443A/B)
• Over-the-air firmware update
• Over-the-air key update
Communication Bluetooth
®
4.2, USB
Interface
Power & Battery Lithium polymer rechargeable battery
520mAh, 3.7V
Charging Via USB-C
Swipe Speed 15cm/sec – 100cm/sec
LED Indicator
NFC LED Indicator Ready for NFC Reading: First LED on
Success Reading: 4 LEDs on in
consecutive order
Buzzer Transaction Completed:
One “BEEP”sound
Errors:
Two “BEEP”sounds
Key Management DUKPT, MK/SK
Encryption TDES, AES
Algorithm
Supported iOS14+ and Android 8.0+
Operating
Systems
Product Size 66.6 x 59.7 x 18.5mm
/ 2.62 x 2.35 x 0.73inch (approx.)
Product Weight 75g / 2.65oz (approx.)
Operating 0°C – 45°C (32°F – 113°F)
Temperature
Operating Humidity Max 95%
Storage -20°C – 55°C (-4°F – 131°F)
Temperature
Storage Humidity Max 95%
Sticky Pad Removable adhesive
Sticky Pad Size 46.6 x 38mm / 1.84 x 1.50inch (approx.)
Cautions & Important Notes
• Ensure the device is fully charged before use.
• Please ensure the magstripe or EMV chip of the card is
facing the right direction when swiping or inserting card.
• The NFC card should be tapped within a 4 cm range on
top of the reader mark.
• Don’t drop, disassemble, tear, open, crush, bend, deform,
puncture, shred, microwave, incinerate, paint or insert
foreign object into the device. Doing any of which will
damage the device and void the warranty.
• Don’t immerse the device into water and place near
washbasins or wet locations. Don’t spill food or liquid on
the devices. Don’t attempt to dry the device with external
heat sources, such as a microwave or hair dryer. Don’t use
any corrosive solvent or water to clean the device.
• It’s recommended you only use a dry cloth to clean
the surface.
• Don’t use any sharp tools on the internal components,
connectors or contacts. Doing so may lead to device
malfunction and void the warranty.
Battery
This device contains a built-in lithium-ion battery. Improper
use of which may result in overheating, fire, and injury. The
battery in this device is not user replaceable and should only
be replaced by an au
thorized service provider.
For optimal lithium-ion battery performance, follow advised
guidelines:
• Operating Environment Temperature
• Storage Environment Temperature
• Charge Poynt Card Reader with approved Docking Station
or approved Power Adapter set to 100% full charge at least
every 3 months.
Please note:
• Not following above guidelines may result in the battery
capacity draining quicker, increase duration to achieve full
charge, impede ability to achieve full charge, and deplete
battery to zero capacity.
• Not following above guidelines may result in the product not
functioning, rendering it unusable or unrecoverable.
Disposal Information
Recycle and dispose of in accordance with local, state and
federal regulations. This device must be recycled or disposed
of separately from household waste or recycling.
All LEDs off: Device power off
Red LED on: Charging battery
Green LED on:
Blue LED flashing in every 2 seconds:
Blue LED flashing in every 5 seconds:
Bluetooth is connecting or disconnected
USB connected
Standby mode
Blue LED on:
Bluetooth is connected
Fully charged