User's Manual

ManualsBrandsPowertech Industrial ManualsElectronicsGreen Powerlink Gateway

Enterprise Energy Management

Gateway

Automatic Energy Saving & Monitoring

The GREEN POWERLINK Enterprise Series provides in-office energy display for administrator to track

and monitor entire office and appliances energy consumption with CO2 emissions

www.power-tech.com.tw

Powertech Industrial Co., Ltd

10 F, N o. 40 7 , C hu n g S han Rd . , S ec 2 ,

Ch u ng Ho Cit y, 23 5 58 Taipei Co u nt y,

Ta iwa n

T : +8 86- 2-8 2 21 - 55 8 8

F : +8 86- 2-8 2 21 - 56 8 0

E : sa les @po w e r-t ech . com .t w

Features

＊Remote IE Web Browsing Management & Power On/Off Control

＊Remote real time CO2, KW/h usage and Cost information display

＊RF data Receive & Transmit.

＊Support up to 9 power strip or wall tap devices easy for learning

＊Link Energy Management Software easy upgrade to large system

＊Analysis and Prediction future CO2, KW/h usage and Cost for each device

＊Budget cost control for each device

＊Real time remote device power on/off control

＊Scheduling regular device power on/off control

＊Device Decaying analysis and control

＊Budget cost over, Device decaying and surge protected warning via email,

or SMS with event log for event process and management

＊History of CO2, KW/h and Cost data search for analysis and management

Enterprise Management

Gateway

WIRE

2-Way RF

Internet

Track Individual appliance

electricity usage

Track Area appliances

electricity usage

ROUTER

Smart Phone/

iPhone/ iPad

PC/ Notebook/

Tablet

Online IE

Web Browser

PT001 PT002 PT003 PT004 PT005

400

350

200

300

250

150

100

Summary of content (18 pages)

PAGE 1
Enterprise Energy Management Gateway Automatic Energy Saving & Monitoring The GREEN POWERLINK Enterprise Series provides in-office energy display for administrator to track and monitor entire office and appliances energy consumption with CO2 emissions www.power-tech.com.tw Features ＊Remote IE Web Browsing Management & Power On/Off Control ＊Remote real time CO2, KW/h usage and Cost information display ＊RF data Receive & Transmit.
PAGE 2
Energy Management Gateway Setup Guide M9PG01 Browse and access Gateway within intranet network On IE browser, user can browse the energy consumption of the appliances connected to the PowerLink Wall Tap or power strip, and control outlet power on/off. 1.
PAGE 3
2. Select and double click Network Connections 3.
PAGE 4
. Right-click the mouse and select Properties 5.
PAGE 5
6. Select the “Use the following IP address” option and key in the following IP address information in the area, then press OK to exit. IP address: 192.168.1.100 Subnet Maske: 255.255.255.0 Default gateway: 192.168.1.1 7. Connect one end of RJ45 Internet cable to the gateway (M9PG01), and the other end of internet cable to PC. 8. Connect the included AC/DC adaptor to the gateway (M9PG01). Network connection is working when you see the connection icon.
PAGE 6
9. Open Internet Explorer web browser and key in “Http://192.168.1.168 to enter the gateway operating page.
PAGE 7
10. To set up Internet Explorer to work with the gateway, click on tools and select internet options 11. Select Settings in internet options page to setup temporary internet files option.
PAGE 8
12. To check for newer version of stored pages, check on “Every visit to the page” option then press OK to exit.
PAGE 9
Operating Instructions: Please confirm the following items are well-prepared before entering the operating page. ( I ) Connect M9PG01 with PC Internet cable, and check if you can see the icon of ”Connected” at lower right corner of screen. ( II ) Prepare PowerLink Wall Tap (R9P125) or Power strip (R9P602), and connect to AC power to be paired up with the gateway (M9PG01). 1. When entering the operating page, click ”Channel Setup” at the left side of screen.
PAGE 10
2. Press the Learning Key of PowerLink Wall Tap (R9P125) or power strip (R9P60203) for 3 seconds to enter the learning mode and the light on the learning key will be flashing. 3. On the channel setup page, select Channel and press connect to pair up the PowerLink Wall Tap (R9P125NI) or power strip (R9P602) with the gateway. 4. When learning is completed, the learning key will stop flashing. 5. Then select “Run Time Status” at the left side of screen.
PAGE 11
If the connection is up and running, you can see the power consumption information of the PowerLink Wall Tap or Power strip. You can also control the power on/off on the operating page by pressing power on or off.
PAGE 12
Browse and access Gateway from internet Anywhere and anytime, user can browse energy consumption of the connected appliances and control power on/off from internet.
PAGE 13
A typical example of Network Address Translation (NAT) setup is provided in the following example instruction. 1. Login the router 2.
PAGE 14
3. Enter “NAT” setup page. 4. Enable Network Address Translation (NAT) service. 5.
PAGE 15
6. In the application page, key in the Gateway (M9PG01) IP address information as following example.  Select “HTTP” as Service Name.  Select Port 80 as your Gateway port selection  Key in the IP address of the gateway  Press apply to finish NAT setup 7.
PAGE 16
8. The NAT service of the router will redirect your access request to the corresponding Gateway (M9PG01).
PAGE 17
FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 18
Neutral Product Specification Sheet PowerLink M3 Gateway 廠編 MODEL NO.