Operation Manual

ManualsBrandsPowerplus ManualsOtherPOWX13302

POWX13302 EN

1 APPLICATION ................................................................................... 3

2 DESCRIPTION ................................................................................... 3

3 PACKAGE CONTENT LIST .............................................................. 3

4 SYMBOLS .......................................................................................... 4

5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 4

5.1 Working area ............................................................................................................. 4

5.2 Electrical safety ......................................................................................................... 4

5.3 Personal safety ......................................................................................................... 4

5.4 Power tool use and care ........................................................................................... 5

5.5 Service ....................................................................................................................... 5

6 MACHINE-SPECIFIC SAFETY WARNINGS ..................................... 5

7 ASSEMBLY ........................................................................................ 6

7.1 Battery charging........................................................................................................ 6

7.2 Charging indication .................................................................................................. 6

7.3 To install or remove the battery pack ...................................................................... 7

7.3.1 To remove the battery ................................................................................................. 7

7.3.2 To install the battery .................................................................................................... 7

7.4 Changing the Tool ..................................................................................................... 7

7.4.1 Selecting the Application Tool/Accessory .................................................................... 8

7.4.2 Mounting/Replacing the Application Tool/ Accessory .................................................. 9

7.4.3 Mounting/Replacing a Sanding Sheet on the Sanding Plate ........................................ 9

8 OPERATION ...................................................................................... 9

8.1 Switching ON/OFF ..................................................................................................... 9

8.2 Adjusting the frequency ........................................................................................... 9

8.3 Battery capacity indicator (Fig. 1/ pos. 9) .............................................................. 10

8.3.1 All LEDs light up: ....................................................................................................... 10

8.3.2 Yellow and red LEDs light up: ................................................................................... 10

8.3.3 Red LED ................................................................................................................... 10

8.4 LED light (Fig. 1/ pos. 7) ......................................................................................... 10

8.5 Working Advice ....................................................................................................... 10

8.5.1 Sawing ...................................................................................................................... 10

Summary of content (13 pages)

PAGE 1
POWX13302 EN 1 APPLICATION ................................................................................... 3 2 DESCRIPTION ................................................................................... 3 3 PACKAGE CONTENT LIST .............................................................. 3 4 SYMBOLS .......................................................................................... 4 5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 4 5.1 Working area ..........
PAGE 2
POWX13302 EN 8.5.2 Separating ................................................................................................................ 10 8.5.3 Sanding..................................................................................................................... 10 8.5.4 Scraping.................................................................................................................... 11 9 CLEANING AND MAINTENANCE ..................................................
PAGE 3
EN POWX13302 12V LI-ION MULTI-USE TOOL POWX13302 1 APPLICATION Depending on which accessory mounted this power tool is intended for dry sanding small areas and for sawing, scraping polishing, rasping, cutting and separating. WARNING! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION 1. 2. 3. 4. 5. 6. 7. 8.
PAGE 4
EN POWX13302 4 SYMBOLS In this manual and/or on the machine the following symbols are used: In accordance with essential Denotes risk of personal injury requirements of the European or damage to the tool. directive(s). Read manual before use. Wear ear guards and goggles. Wear a mask In dusty conditions. 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury.
PAGE 5
POWX13302      EN Avoid accidental starts. Ensure the switch is in the off position before inserting the plug. Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely. Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to a rotating part of the power tool may result in personal injury. Do not reach out too far. Keep your feet firmly on the ground at all times.
PAGE 6
POWX13302            EN Keep your workplace clean. Blends of materials are particularly dangerous. Dust from light alloys can burn or explode. Avoid unintentional switching on. Ensure the On/Off switch is in the off position before inserting battery pack. Carrying the power tool with your finger on the On/Off switch or inserting the battery pack into power tools that have the switch on invites accidents. Do not open the battery. Danger of short-circuiting. Protect the battery against heat, e.g.
PAGE 7
EN POWX13302 Push the battery pack to make sure the contacts on the battery pack engage properly in the charger. The red LED will now light up and the green LED will go out. It indicates that the battery is charging. When the charging time ends after about 1 hour, the red LED will go out and the green LED will light up again. 7.3 7.3.1 To install or remove the battery pack To remove the battery Press the unlocking buttons and pull the battery out of the machine to the rear. Do not exert any force. 7.3.
PAGE 8
EN POWX13302 7.4.1 Selecting the Application Tool/Accessory Accessory Material Wooden materials, plastic, gypsum and other soft materials. Plunge cut saw blade Wooden materials, plastic, nonferrous metals. Segment saw blade Wood, paint, carpet adhesive, silicone and other elastic materials. Shovel blade Grouting joints, soft wall tiles, glass-fibre reinforces plastic and other abrasivematerials. Diamond disc Depends on sanding sheet.
PAGE 9
EN POWX13302 7.4.2      Mounting/Replacing the Application Tool/ Accessory If required, remove an already mounted application tool/accessory. For removing the application tool/accessory, loosen the screw with the Allen key and remove the application tool/accessory. Mount the requested application tool/accessory in such a manner on the tool holder that the offset faces downward.
PAGE 10
POWX13302 EN 8.3 Battery capacity indicator (Fig. 1/ pos. 9) Slide the ON/OFF switch (4) forward. The battery capacity indicator (9) indicates the charging status of the battery with the help of 3 coloured LEDs. 8.3.1 All LEDs light up: The battery is fully charged. 8.3.2 Yellow and red LEDs light up: The battery has enough charge left. 8.3.3 Red LED The battery is empty, charge the battery. 8.4 LED light (Fig. 1/ pos. 7) The LED light (7) allows to provide additional illumination for the work area.
PAGE 11
EN POWX13302 8.5.4 Scraping For scraping, select a high oscillation rate. Work on a soft surface (e.g. wood) at a flat angle and apply only light pressure. Otherwise the scraper can cut into the surface. 9 CLEANING AND MAINTENANCE Before performing any work on the equipment, pull the power plug.      Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the machine housing with a soft cloth, preferably after each use.
PAGE 12
POWX13302           EN Repairs may only be carried out by an authorized customer service center for Powerplus tools. You can always obtain more information at the number 00 32 3 292 92 90. Any transportation costs shall always be borne by the customer, unless agreed otherwise in writing. At the same time, no claim can be made on the warranty if the damage of the device is the result of negligent maintenance or overload.
PAGE 13
EN POWX13302 14 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: 12 V Li-Ion Multi-use tool Trade mark: Powerplus Model: POWX13302 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.