PowerKiss Heart
PowerKiss Heart Setup Guide Version 3.
PowerKiss Heart With PowerKiss, you represent Setup Guide state-of-the-art technology and design. Imagine getting rid of low Thank you for choosing PowerKiss. batteries and the annoying, tangled PowerKiss technology provides a wires from tabletops at the same simple, efficient and user-friendly time! Step into the future with us. way to keep your dear devices charged.
Contents PowerKiss wire-free charging Ring Heart Contents of the box Single Heart Double Heart Tools for the installation The milling for the Heart under the furniture surface Introducing the Powerkiss Heart Setup instructions for Powerkiss Heart STEP I - Placing the Heart STEP II - Attaching the Heart STEP III - Inserting crystal STEP IV - Marking the Hotspot STEP V - Setting the power cables for single Heart STEP VI - Setting the p
PowerKiss wire-free charging Heart The essence of wire-free charging To turn a surface into a wire-free is the pairing of Heart and Ring. The charging platform it first needs to Heart is the transmitter and the Ring be given a Heart. Like most, this is the receiver and together they Heart is also hidden except for a enable wire-free charging on almost small LED light to indicate that it is any surface. ready to charge a mobile device wearing a Ring.
Contents of the box Single Heart PowerKiss Heart Power cable holders & ties Power supply: RS or PhiHong Setup & User Guide 6 AC power cord Installation kit (crystal, 4x screw, Hotspot sticker & Velcro fastener)
Contents of the box Double Heart 2x PowerKiss Heart Power cable holders & ties Power supply: Mascot or PhiHong Setup & User Guide AC power cord Installation kit (2x crystal, 8x screw, 2x Hotspot sticker & 2x Velcro fastener) Power split cable The items supplied with your device and available accessories may be different depending on your region or service provider 7
Tools for the installation Torx 20 drill bit Power or cordless drill File Wire cutters 8
The milling for the Heart under the furniture surface 34 ±1 A A 4 ±0,5 68 ±1 3,5 +0,1 SECTION A-A UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MILLIMETERS SURFACE FINISH: TOLERANCES: LINEAR: ANGULAR: NAME DRAWN tal DEBUR AND BREAK SHARP EDGES FINISH: SIGNATURE DO NOT SCALE DRAWING 9 DATE 12.1.
Introducing the Powerkiss Heart Lightguide Coil Screw holes Screw holes Coil support Power supply port 10
Setup instructions for lightguide goes through the hole Powerkiss Heart in the middle and comes out the STEP I - Placing the Heart other side. Make sure that the coil goes firmly into the round grooved Place Heart in the milled out area out area and is evenly against the of the funiture surface. Push the surface.
STEP II - Attaching the Heart Use the screws found in the installation kit to fasten the Heart firmly to the surface so that the power supply port is facing away from the closest edge.
STEP III - Inserting crystal Put the crystal (provided in the installation kit) on top of the Measure the length of the lightguide and press it into the hole. lightguide that stands out from the Make sure that the lightguide goes furniture surface and cut the excess all the way into the crystal. leaving 10mm. Polish the end of the cut lightguide.
STEP IV - Marking the For completing the installation with Hotspot single Heart, continue to page 15. For completing the installation with Attach PowerKiss Hotspot sticker double Heart turn to page 17. (provided in the Installation package) to mark the charging area. Place it so that it is symmetrically around the center point, PowerKiss logo on the left side.
STEP V - Setting the power cables for single Heart Installing only one Heart, attach the AC power cord to a power supply and the power supply to the Heart’s power supply port. Use only RS or PhiHong power supplies with single Heart.
Attach the power cables using velcro fastener to the piece of the cable holders and ties when furniture so that the label of the needed. The power supply (RS or power is visible.
STEP VI - Setting the power cables for double Heart In the case of setting up two or more Hearts into the same piece of furniture, the underlying procedure is almost the same as with installing one Heart. The difference comes from sharing a power supply (Mascot or PhiHong) and using a split cable for distributing power.
Attach the power cables using the the piece of furniture so that the cable holders and ties. The power label of the power is visible.
STEP VII - Checklist Wires • Always install the cables so that Power they are firmly and aesthetically • Do not attach the power supply to attached to the piece of furniture places where it can be interfered and/or the surroundings and out of with (e.g.
Technical specifications The Heart The Ring Dimensions (LxWxH): • 163mm x 132mm x 24mm Dimensions (LxWxH): • 43-46mm x 34mm x 7.5mm Power consumption: • Charging 12W (max) • Standby 240mW Power output: • 5W (max) Compatibility: • Nokia 2mm • Apple • MicroUSB Charging area/Hotspot size: • Width 60mm • Height 15mm Official power supplies Use only power supplies listed here with the PowerKiss system. With one Heart (single): • RS SAW18-12.
Regulatory Compliance Information FCC Compliance Statement (United States) - FCC Class B Part 15 This device complies with Part 15 of the Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference • This device must accept any interference received, including interference that may cause undesired operation. See instructions below if radio or television interference is suspected.
European Union - Disposal information Waste Electrical & Electronic Equipment, applicable in the European Union and other European countries with separate collection systems. This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. power cables and adapters) should not be disposed of with other household waste at the end of their working life.
This warranty does not cover normal tear and wear, damage caused by misuse or abuse; accident; indirect accident; the attachment of any unauthorized accessory; usage otherwise than intended to be used; alteration to the product; improper installation; unauthorized service, repairs or modifications; improper use of electrical/power supply; loss of power; dropped product; malfunction or damage of an operating part from failure to provide manufacturer’s recommended maintenance; transportation damage; theft; ne
www.powerkiss.com info@powerkiss.