User's Manual

ManualsBrandsPowercast ManualsElectronicsWireless Charging Grip

User Manual

WCG91501 – 915 MHz Wireless Charging Grip

Rev 1 – 2019/11 User’s Manual – WCG91501 Grip Page 1

www.powercastco.com

PRODUCT DESCRIPTION

The Powercast Wireless Charging Grip

(WCG91501) has been designed to charge

its internal battery wirelessly while in range

of a 915MHz RF Transmitter (such as the

PowerSpot® TX91503 RF Wireless Power

Transmitter). The Wireless Charging Grip

uses this stored, wirelessly harvested power

to recharge attached Joy-Con controllers.

The WCG91501 is made out of durable

plastic and designed to comfortably house

Joy-Con controllers for wireless recharging

and for enhanced game play. An optional

USB-C connector can provide DC power to

charge the WCG91501 at a more rapid rate.

The WCG91501 includes a status LED to

provide feedback on battery and charging

status. Once Joy-Con controllers are

properly mounted, the WCG91501 begins

charging the controllers from its internal

battery.

FEATURES

 FCC approved

 Wirelessly rechargeable

 Comfortable feel

 Extends Joy-Con battery life

 Wide charging area

PRODUCT CONTENTS

The following items are included:

Qty

Description

Wireless Charging Grip

Quick Start instruction card

APPLICATIONS

 Wireless Charging of Joy-Cons

 Gaming Controller

Powercast®, Lifetime Power®, Powerharvester®, and Powercaster® are registered trademarks of Powercast Corporation.

All other trademarks are the property of their respective owners.

Powercast products and technology are covered by one or more of the following patents and other patents pending:

6,289,237 | 6,615,074 | 6,856,291 | 7,027,311 | 7,057,514 | 7,639,994 | 7,643,312 | 7,812,771 | 7,844,306 | 7,868,482 | 7,898,105

7,925,308 | 8,159,090 | 8,350,255 | 8,432,062 | 8,461,817 | 8,621,245 | 9,000,616 | 9,021,277 | 9,107,579 | 9,251,699 | 9,706,924

Summary of content (7 pages)

PAGE 1
User Manual WCG91501 – 915 MHz Wireless Charging Grip PRODUCT DESCRIPTION The Powercast Wireless Charging Grip (WCG91501) has been designed to charge its internal battery wirelessly while in range of a 915MHz RF Transmitter (such as the PowerSpot® TX91503 RF Wireless Power Transmitter). The Wireless Charging Grip uses this stored, wirelessly harvested power to recharge attached Joy-Con controllers.
PAGE 2
User Manual WCG91501 – 915 MHz Wireless Charging Grip COMPONENT FEATURES on / off switch Fig. 1: WCG91501 features Rev 1 – 2019/11 User’s Manual – WCG91501 Grip www.powercastco.
PAGE 3
User Manual WCG91501 – 915 MHz Wireless Charging Grip SET-UP AND OPERATION 1. Mount or place the RF transmitter in the desired location with the Powercast logo and status LED facing the direction of where the WCG91501 will be placed. 2. Turn the WCG91501 upside-down and flip the switch to the on position. 3. Slide the Joy-Con controllers downward into the brackets. The Joy-Cons will lightly click into place once secured. 4.
PAGE 4
User Manual WCG91501 – 915 MHz Wireless Charging Grip Notes: 1. If the WCG91501 LED does not respond when placed in front of the transmitter, verify that the switch on the back of the device is turned on. If the LED still does not respond turn the switch off for 5 seconds and then turn it back on. If the LED still does not respond the battery could be fully depleted.
PAGE 5
User Manual WCG91501 – 915 MHz Wireless Charging Grip COMPLIANCE STATEMENTS Changes or modifications not expressly approved by Powercast could void the user’s authority to operate the equipment. Use and maintain device only as specified in this manual. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 6
User Manual WCG91501 – 915 MHz Wireless Charging Grip WARNING! FCC and IC Radiation Exposure Statement: This portable equipment with its antenna complies with FCC’s and IC’s RF radiation exposure limits set forth for an uncontrolled environment. To maintain compliance follow the instructions below: 1. This device must not be collocated or operating in conjunction with any other antenna or transmitter. 2. Avoid direct contact to the antenna, or keep contact to a minimum while using this equipment.
PAGE 7
User Manual WCG91501 – 915 MHz Wireless Charging Grip WARRANTY THIS LIMITED WARRANTY applies solely to standard transmitters manufactured by or on behalf of Powercast.