PRODUCT OVERVIEW The portable Wi-Fi SD/USB (code name: Mussel) device allows you to convert any SD memory cards and USB external storage devices into a Wi-Fi accessible media. Simply insert your SD memory card into the SD slot or connect your USB external storage into the built-in USB port. Switch the unit on and you can now wirelessly access your videos, music, photos, data and stream it to your iPad®, iPhone®, tablets, smartphones, and notebooks.
• Support multiple NSA, including Samba / WebDAV • Support multiple platform client tools, including Windows, Mac, Linux, iOS, and Android *Battery life subject to normal usage conditions and configurations. *Minimum Hardware Requirement :1GB Storage Space for SD Memory Card or Flash Drive (100MB capacity will be used for temporary files) A. To function as SD memory card reader. Simply connect the device into the computer’s available USB port.
1. Hardware and Accessories The Power 7 Wi-Fi SD/USB Storage kit includes the following: power adapter、USB cable 2 Product Parameters 2.1 Product Dimensions Dimension:98mm (L) X 72mm (W) X 16mm (H) 2.2. Product Specification CPU: Model: Ralink RT5350 Frequency: MIPS24KEc 360MHZ Wi-Fi: Standard: 802.11 b/g/n, Frequency: 2.4 GHZ Speed: 72Mbps at 20MHz 150Mbps at 40MHz USB Interface:Micro USB 2.0 for data transfer and charging Battery: Capacity:2600mAh Charging current: supports 500mA, 800mA and 1.
3. Minimum Hardware Requirements • Internet Connection • PC Operating System Requirements • o Windows: XP/Vista/Windows 7 o Mac: OS X 10.6.0 and later o Others: Fedora 12 (Linux) and late PC Web Browser o Windows: Supports Internet Explorer 7.0 and higher version o Mac: Supports Safari 3.0 and higher version o Others: Firefox 3.5 and higher version • iOS: 4.0 and above • Android: 2.3 and above • Router or Switch 4. Product View 5. Device Interface 5.
support MicroSD and MiniSD. 5.4 Power Button: Switch on/off the device. 5.5 Reset Button: Reset the device to the Default Factory Settings. 5.
Ready to use 6. Storage Installation 6.1 SD Memory Card Note: Do not touch the exposed connectors on your SD memory card. Installing the SD memory card is very simple. Locate the SD memory card slot. Simply insert the memory card as seen on the image below. Gently push the memory card all the way in until it locks into its place. Press the power button to switch on the device. Wait for few seconds to complete the initialization process and your SD memory card is ready to use. 6.
. PC Client Software Installation Our included Client Utility software is the only software that you will need to copy on your computer. This software utility allows you to easily search and look for your Wi-Fi SD/USB that is connected from your home network. 1. Copy the “AirStor” executable file on your PC and follow the on-screen instructions. 2. Once the copy is complete, double-click on the “AirStor” icon on your desktop to launch the software utility. 8. Using Personal Computer 8.1.
If you do not find the WiFiSD on the list of devices connected in your network, click on the “Refresh” button to refresh the device list. Select the WiFiSD on the list, then click on the “Log In” button to enter the web interface as seen on the image below. Type the default User Name as admin and leave the User Password as blank. Click on the “Log In” button to access the Web Management Interface.
8.3. Wi-Fi SD/USB Configuration using PC Once your Wi-Fi enabled-PC is successfully connect to the Wi-Fi SD/USB, using the “AirStor” will allow you to access our built-in Web Management Interface and configure your device. 1. During the initial setup, our Wizard will automatically run and will guide you through the step-by-step process on configuring the Wi-Fi SD/USB as seen on the screenshot below. You may cancel this process by clicking on the “X” at the top right corner of the window.
b. By selecting Manual, you have to manually assign an IP address to connect to the internet 3. Click on the “Next” button. The next step is to configure the Wi-Fi Disk. D) SSID: Enter the combination of letters and numbers only. 32 characters is the maximum allowable SSID length E) Channel: The default setting is set to Auto. There are 14 available channels to choose from. Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.
F) Modes: The default setting is 11b/g/n. You can also manually set the modes to 11Mbps (802.11b), 54MBPS (802.11G), and 150Mbps (802.11n). G) Security: The default setting is Mixed WPA/WPA2-PSK. WPA-PSK and WPA2-PSK are also available. H) Password: The default password is set to 11111111. I) IP Address: The default IP address is set to 10.10.10.254 with subnet mask of 255.255.255.0. The IP address can be changed. 4. Click on the “Next” button. The next step is to change the admin default password.
The step-by-step wizard can be canceled at anytime. Click on the “X” located at the top right of the window as seen on the image below. Click on the “OK” button to exit or “Cancel”. 9. Using Mobile Devices 9.1. iOS Client App Installation 1. Click on the “App Store” icon on the desktop as seen on the image below. Search and locate the free “AirStor” app and follow the on-screen installation instructions. 2.
9.2. Wirelessly connecting your iPhone/iPad 1. Turn-on the Wi-Fi SD/USB. Wait for few minutes to complete the initialization process. The blue Wi-Fi LED on the device should remain solid indicating that the initialization process has been completed. 2. Click on the “Settings” icon on the desktop as seen on the screenshot below. 3. Click on the “Wi-Fi”. Inside the Wi-Fi Networks, the “WiFiSD-XXXX” should appear on the list. Click on the “WiFiSD-3932” as seen on the image below.
Once the “WiFiSD-XXXX” is selected, a check mark will appear before the SSID and the Wi-Fi logo will appear after the device name on the top left of the display. 9.3. iOS User Login 1. Click on the “AirStor” icon to launch the app as seen on the image below. 2. Enter admin as the user name and the password that you assigned during the configuration process. The password is only required during the first login.
3. Once the password has been entered correctly, you will be automatically connected into the “My WiDisk”. The “My WiDisk” is the Wi-Fi SD/USB Storage. As seen on the screenshot above, the SD Memory Card and the USB Flash Disk are both mounted on the desktop. Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.
9.4. Android Client App Installation 1. Click on the “Play Store” icon on the desktop as seen on the image below. Search and locate the free “AirStor” app and follow the on-screen installation instructions. 2. Once the installation process has been completed, the “AirStor” app can be found on the desktop as seen on the image below. 9.5. Wirelessly connecting your Android devices 1. Turn-on the Wi-Fi SD/USB. Wait for few minutes to complete the initialization process.
3. Switch the Wi-Fi to ON position. Inside the Wi-Fi networks, the “WiFiSD-XXXX” should appear on the list. Click on the “WiFiSD-3932” as seen on the image below. The “3932” part of the SSID is the last 4 digits of the device MAC Address. Enter the default password (11111111) and click on the “Connect” button. 4. The word “Connected” will appear under the SSID name of which is an indication that the Android Device is connected to the Wi-Fi SD/USB. 9.6. Android User Login 1.
no need to enter it again the second time you login. 3. Once the password has been entered correctly, you will be automatically connected into the “My WiDisk”. The “My WiDisk” is the Wi-Fi SD/USB Storage. As seen on the screenshot above, the SD Memory Card and the USB Flash Disk are both mounted on the desktop. 10. Basic Functionality 10.1. iOS Device Client Once you have successfully connected to the Wi-Fi SD/USB, by default, you will be inside the “My WiDisk”.
My WiDisk Main Screen View – the WiFiSD_Volume1 and USBDisk_Volume1 can be seen on the desktop. Home Button – back to the main screen. View Button - change to List or Thumbnail view. Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.
Setting Button – change the Wi-Fi SD/USB configuration. Back Button – back to previous screen File Manager Button – to share, copy, delete, download, upload file functions Search Box – to search for specific file name and/or file extension. My WiDisk – the Wi-Fi SD/USB or the Remote Storage. My Device – the device that you are using to access the Wi-Fi SD/USB or the Local Storage More Button – to view the About, Now playing and the File Transfer status. 10.2.
My WiDisk Main Screen View - the WiFiSD_Volume1 and USBDisk_Volume1 can be seen on the desktop. Home Button – back to the main screen. View Button - change to List or Thumbnail view. Setting Button – change the Wi-Fi SD/USB configuration. This button is only active when switched to the “My WiDisk”. Back Button – back to previous screen Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.
File Manager button – to share, copy, edit, delete, download, upload file functions Search Box – to search for specific file name and/or extension. My WiDisk – the Wi-Fi SD/USB or the Remote Storage My Device – the device that you are using to access the Wi-Fi SD/USB or the Local Storage More Button – to view the About, File transfer status, Now playing status and the Exit button. 10.3.
Note: Please consult your device manual to check whether it will support the music/audio files that you would like to play. - When clicked, the current music that is playing will restart at 0.00. Clicked twice, it will play the previous music. - When clicked, it will play the next music - When clicked, it will start playing the music or audio file. Click again, the will pause/stop playing the music. - When clicked, it will exit the music player interface. Five play-modes: a.
Wi-Fi SD/USB for ease of use and file organization. The movie or video files can be played regardless if you are inside the “My WiDisk” or “My Device”. Simply locate the movie or video file that you would like to play. Click on the file name and your movie will automatically play as seen on the screenshot below. Note: Please consult your device manual to check whether it will support the movie or video files that you would like to play. By default, the video playback is in the landscape mode.
1. - When clicked, the movie that is currently playing will stop and will exit the Movie Player Interface. 2. - When clicked, this will scale the movie automatically according to your preference. 3. - Click, hold and slide the progress button to fast-forward or rewind the movie. 4. - Click, hold and slide the volume control to increase or lower the volume. 5. Press and hold to fast-rewind the movie while playing. 6. Press and hold to fast-forward the movie while playing. 7.
Note: The control panel will vary depending on the movie player installed on your Android devices. Please consult the movie player’s user guide on how to control the movie. 10.6. Viewing/playing photos (iOS only) Tip: It is highly recommended to create a folder or folders where to copy all your photos into the Wi-Fi SD/USB for ease of use and file organization. Note: The Wi-Fi SD/USB currently supports .jpg, tiff, png and .bmp images.
There are few available functions to control the slideshow. • Click the button to pause the slideshow from playing and press again to continue playing. • Click the button to restart or to replay the slideshow. • Click the button to play the slideshow once and it will stop at the last image or photo. • Click the button to return from the previous screen. • Click the button to share photos via email, adding the photo inside the device Photo Album or through Facebook.
• Select button - search and locate the file or files that you would like to play as the background music. Click on the • button to return to the slideshow as seen on the screenshot below. Repeat button – the background music will continue playing the same music when it is switched-on. By default, this option is switched-off. 10.7.
swipe your finger across the screen to manually view the photos or click the button, to automatically play the photos as slideshow. There are few functions that are available to control the slideshow. • Click the button to pause the slideshow from playing and press again to continue playing. • Click the button to restart or to replay the slideshow. • Click the button to play the slideshow once and it will stop at the last image or photo. • Click the button to return from the previous screen.
10.8. Sharing photos/images (iOS only) There are few available options to share photos to your friends and family; by email, saving to the device Photo Album and upload to Facebook. Note: Internet connection is required to share photos/images via email or accessing any social media network. • Click on the button located at the top right of the screen to show the three options available to share your photos/images. Click the button to return from the previous screen.
2)Add to photo – when clicked, the selected photo will be saved into the Photo Album of the device. 3)Upload to Facebook – when clicked, you will be directed to the Facebook login screen. The Facebook app must be installed on your device. Facebook login and password is required. 10.9. Sharing photos/images (Android only) Sharing photos using your Android device will vary depending on the apps installed on your device.
2) Save Photo button - when clicked, the selected photo will be saved into the device Photo Gallery. 10.10. Opening/viewing documents (iOS only) The device client app supports keynote, numbers, page, Excel, Word, .pdf, .txt and ppt files. To open or view any documents, simply click on the file name or the icon. This will automatically open the supported file. Click the button to return from the previous screen or click the button to send the file via email as seen on the screenshot below.
Note: Internet connection is required to send emails. Click the “E-Mail” button. The default email app will launch automatically and the selected document will be sent as an attachment. . Once the email is sent, there will be a “Mail Sent” message that will appear on the lower-left corner of the screen. This is an indication that the email was sent successfully. Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.
“Mail Canceled” message will appear on the lower-left corner of the screen when the email is canceled. See the screen shot below. 10.11. Opening/viewing documents (Android only) To open/view a document using your Android device, simply click on the file name or icon that you wish to open/view. This will automatically open the file using the default viewer or the installed app on your Android device as seen on the screenshot below. Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.
Note: Internet connection is required to send emails. Due to the complexity of the Android OS, sending emails may vary depending on the app installed on your mobile device. Please consult your device manual if in doubt. To send the document as an attachment, click on the button at the top right of the screen. Click on the “File”, then “Send”. Once the “Send” button is clicked, a list of installed app will appear on your screen.
seen on the screenshots below, the button will appear at the top as part of the menu once the button is clicked. Screenshot from iOS Device Screenshot from Android Device At the bottom of the screen, there are few available functions. See below for their functions. - Once clicked, all files will be selected. The icon will turn into blue color and a check mark will appear on all files. - Click once again, all files will be unselected. The check marks will no longer visible.
- From the My WiDisk, the file or files may be downloaded to the local drive or to the My Device. The down arrow indicates that you are currently in the My WiDisk. - From the My Device, the file or files may be uploaded to the remote storage or to the My WiDisk. The up arrow indicates that you are currently in the My Device. - When clicked, the list of files that are in queue for uploads/downloads will appear as well as the list of files that were copied/transferred successfully.
3. Click on the . 4. Select and click the folder where you want the file or files to be copied or transferred. • A new folder may be created to copy/transfer the selected file or files. To create a new folder, simply click on the “Create Folder” button. Enter the new folder name inside the box and click the “Done” button as seen on the screenshot below. The folder name must be at least 2 characters and up to maximum of 26 characters in length. Click the “Cancel” button to exit.
5. Click on the “Confirm” button to start copying/transferring files as seen on the screenshot below. Note: Successfully copied/transferred file or files will be listed below inside the “Recent” window as seen on the screenshot above. Click on the “Clear” button to remove or clear the list. 6. Click anywhere on the screen and you will return to the previous screen. Once done, click on the to exit. 10.14.
1. Click on the button. 2. Use your index finger to select a single or multiple files or you may use the select all files to be copied/transferred. button to button. 3. Click on the 4. Select and click the folder where you want the file or files to be copied or transferred. • A new folder may be created to copy/transfer the selected file or files. To create a new folder, simply click on the “Create Folder” button.
characters and up to maximum of 26 characters in length. Click the “Cancel” button to exit. 5. Click on the “Select” button to start copying/transferring files as seen on the screenshot below into the “My WiDisk”. 6. Click anywhere on the screen and you will return to the previous screen. Once done, click on the to exit. 10.15.
• To delete file or files, click on the • Use your index finger to select a single or multiple files. You may click on the Select All files to delete/erase. • to delete or erase the selected file or files. A warning message will Click on the appear on the screen to confirm file deletion as seen on the screenshot below. Click OK to continue deleting files. button. button to 10.17.
10.19. Exiting AirStor App (Android) To exit from using the AirStor Android mobile devices, simply click on the and select the “Exit” button. A warning “Are you sure you want to exit this applet?” message will appear. Click “OK” to continue existing or click “Cancel”. 10.20. Uninstall AirStor App (iOS) To uninstall the app from your Apple Mobile Devices, click and hold the AirStor app for few seconds. An “X” mark will appear on all the icons on your mobile device as seen on the screenshot below.
10.21. Uninstall AirStor App (Android) To uninstall the AirStor app from your Android mobile devices, see the instructions below. Note: Uninstalling app on the Android devices will vary. Please consult your mobile device manual prior to removing any application. 1. Click on the Settings icon from your desktop. 2. Go into the application manager. 3. Locate and select the AirStor app. 4. Click on the “Uninstall” button. Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.
5. A warning “AirStor. This application will be uninstalled.” Click the “OK” button to continue uninstalling the app or click on the “Cancel” button. 11. WEB Management Functions Our built-in Web Management software is a unique web-based utility stored inside our Wi-Fi SD/USB product. No software is needed to install on your Personal Computer to use this utility. Simply launch our “AirStor” client app or open your web browser and enter the 10.10.10.254 IP address.
Allows the user to make changes on the admin password. Provides information of the Internal hard disk drive. Networking Settings allow the user to make modifications and changes to Host Name, Wi-Fi and LAN, DHCP Server, Internet and DDNS. Allows the users to enable and disable the Win File and Ext Net Services. Allows the user to make modifications and changes to the Time Settings, Create System Backup, Firmware Upgrade and Resetting to the factory default setup.
Refresh button - to refresh the display Upload button - to upload file or files into a specific folder. Create Folder - to create a new folder. Maximum folder name is 26 characters in length. Copy button - to copy file or files and paste them into another folder. Move button - to move a file or files from one location to another Download button - to download a file or files into a specific location.
2. On the folder level, you can right-click using your mouse and a pop-up menu will appear. You may Open, Copy, Cut, Delete or Rename the folder as seen on the screenshot below. 3. Selecting multiple files and right-click on the mouse will allow the user to either Copy, Cut or Delete the files as seen on the screenshot below. 4. Right-clicking at the bottom of the window as seen below will allow the user to either Paste, Create or Upload file or files. ◆Open Command – Select a folder and right-click.
view the contents or open the folder. ◆Copy Command - Select a folder or a file and then right-click. Inside the pop-up menu, select “Copy” to make a copy of the entire folder or a file and paste into another location or folder. ◆Cut Command- Select multiple files or folders and then right-click. select “Cut” and then paste the files or folders into another folder.
11.4. Drag and Drop A single file drag and drop is supported by our built-in Web Management Interface, simply click and hold on the file inside the main window and drag it to any folders available inside the Folders tree. 11.5. Information Provides detail information regarding the hardware condition, network status and storage information. 11.5.1.
Provides detailed information regarding the current network settings such as the connection to access the internet, Wi-Fi SSID and IP Address as seen on the screenshot below. 11.6. Settings 11.6.1. Admin User Click on the “User” button. This window will allow you to modify the admin password as seen on the screenshot below. The password should be at minimum of 5 characters to maximum 32 characters in length. Click on the “Save” button the password has been changed.
As seen on the screenshot below, the Volume screen provides information regarding the File System used to format the internal hard disk drive, total and available capacity. , Click on the “X” to exit. 11.7. Network Settings 11.7.1 Hostname The Host Name is a name that is assigned to certain device that is connected to a computer network. The Host Name can be modified to whatever name that will fit your needs. It must begin with a letter and followed by a combination of letters and numbers.
Click on the “Save” button after making any changes. Click on the “X” to exit and cancel. 11.7.2. Wi-Fi & LAN The settings inside the Wi-Fi & LAN can be modified based on your needs. See the screenshot below for the available options. J) SSID: Enter the combination of letters and numbers only. 32 characters is the maximum allowable SSID length K) Channel: The default setting is set to Auto. There are 14 available channels to choose from. L) Modes: The default setting is 11b/g/n.
Click on the “Save” button after making any changes. Click on the “X” to exit and cancel. 11.7.3. DHCP Server The DHCP or Dynamic Host Configuration Protocol is a network protocol that enables a server to automatically assign an IP address to a computer connected into a network. By default, the DHCP Server option is enabled. This option can be disabled if needed and the IP address can be manually assigned. Click on the “Save” button after making any changes. Click on the “X” to exit and cancel.
4. SSID. Type-in the SSID name or click on the “Rescan” button to automatically search for the available wireless network connections. 5. Password. Type-in the correct password to join the wireless network connection selected. 6. IP Address. Select either DHCP or Manually assign an IP address a. By selecting DHCP, the host will provide an automatic IP address to connect to the internet b. By selecting Manual, you have to manually assign an IP address to connect to the internet 11.7.
Step 5:Enter your DDNS application's password in the text box of password Step 6: Click the "save" button If the "Status" appear "Connection successful," the words said setting successful, as below. If appear "Connection failure" said set failed, please check your domain, user name and password. If device mode is Wired Access,we should set DMZ on routers directly ,but if device mode is Wireless Access mode, we should not only set up the DDNS, but also set up the router port forwarding .
Let’s take dyndns.org as an example. Register an account in https://www.dyndns.com free of charge, shown as follows An account and password are acquired once the registration succeeds, and then apply for an DDNS domain name. Enter “my account”, click “add host services” to enter the application window of domain name Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.
Fill hostname/IP address and IP address as well as IP address of LAN where the nase is located to the Wlan network (if your PC and nas are within the same LAN, log in http://whatismyipaddress.com/ to check IP address also the DynDNS below show your LAN IP address) Meanwhile select the purpose of application; Your domain name can be seen in my host once the application succeeds, shown as follows: Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.
11.8 Network Services Windows sharing and network services are available to access the Wi-Fi SD/USB 11.8.1. Windows Sharing Services Data sharing and accessing the Wi-Fi SD/USB product makes it simple by enabling the Windows File Services. By default, this feature is already enabled as seen on the screenshot below. 11.9. System Settings 11.9.1 Time Settings The time settings can be changed based on the region where you are located.
Click on the drop-down list and select the region you are located and switch-on the “Automatically synchronize with an Internet Time Server”. This will automatically update the time when the Wi-Fi SD/USB is connected to the internet. The “Time Sync Frequency” can be set to everyday, every 2 days, every 3 days, up to every 7 days. The automatic time synchronization can be switched-off and apply the PC time instead. Applying the PC time will automatically adjust the time and date based on the PC time.
Simply click on the “Save” button create the backup. This process will create a .bin.gz or .bin file of which can be used to restore the current settings of the Wi-Fi SD/USB. Click the “Save” button to save the backup file on your computer as seen on the screenshot below. To restore the backup, click the folder icon. Locate and select the .bin or .bin.gz file. The backup file will appear below the folder as seen on the screenshot below. Click on the “Save” button to restore.
A warning message will appear as seen on the screenshot below. The device will reboot automatically once the restore process has been completed and will return to login screen. 11.9.3. Firmware Upgrade The device firmware can be upgraded by following the simple steps below. 1. Download and save the latest firmware version on your computer. 2. Click on the folder icon, search and locate the firmware file on your computer and then click on the “Open” button as seen on the screenshot below.
3. The latest firmware update file will appear at the bottom of the folder. Click on the “Save” button to continue updating the firmware. 4. Once the firmware has been installed, the warning message as seen on the screenshot below will appear and the device will automatically reboot and will go back into the login screen. Power 7 Technology Corporation – Wi-Fi SD/USB Users Manuals v1.
11.9.4. Resetting to factory defaults Resetting to factory defaults will reset all your customized settings or whatever changes you made back to its original settings. Simply click on the radio button after the “Restore to Factory Default Settings:” Click on the “Save” button to continue. The Warning Message window will appear. The Wi-Fi SD/USB will automatically reboot once the restoring to the factory default settings have been completed. See the screenshot below.
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.