User's Manual

PowerQuotientInternationalCo.,Ltd

PQIAirPen

A400



GettingStarted

Step1:Chargeyour“PQIAir”Pen

Pleasefullychargeyour“PQIAir”Penbeforethefirstuse.ConnecttheUSBporttoa

PCorUSBpoweradaptertochargeyourdevice.TheorangeLEDindicatorwillturn

offwhencharginghascompleted.TheredLEDindicatorislitwhenbatter ylevel

dropsbelow20%.Pleaserechargeassoonaspossible.



Step2:Prepareyourcontentfor“PQIAir”Pen

InserttheMicroSDHCcardintotheslotof“PQIAir”Pen(SupportsonlyMicroSDHC

4to32GB).Connectthe“PQIAir”PentothePCusingtheUSBplug.“PQIAir”Pen

willappearasaremovablediskdrive,andsimplycopythefilesfromyourPCto“PQI

Air”Pen.

Step3:

Downloadthefree“PQIAirPen+”AppfromAppleAppStore(iOSDevice)orGoogle

Play(AndroidDevice).



Step4:Poweronyour“PQIAir”Pen

PresstheroundPlogopowerbuttonfortwoseconds.FirsttheblueLEDindicator

willlightupandthenthesideblueWi‐FiLEDindicatorwillbeginflashing.Then,

moveontothenextstep.

Step5:

Onyourmobiledevice,choose"Wi‐FiSettings"fromthe"Settings"menu.Then,

choose“PQIAir”Pentoenabletheconnection.



Step6:

Onceconnected,launchthe“PQIAirPen+”applicationonyourmobiledeviceand

starttobrowsethedigitalcontentfrom“PQIAir”Pen.



Note:Repeatsteps3~6toshareyour“PQIAir” Penwithupto5differentdevices.

PAGE 1
Power Quotient International Co., Ltd PQI Air Pen A400 Getting Started Step 1: Charge your “PQI Air” Pen Please fully charge your “PQI Air” Pen before the first use. Connect the USB port to a PC or USB power adapter to charge your device. The orange LED indicator will turn off when charging has completed. The red LED indicator is lit when battery level drops below 20%. Please recharge as soon as possible.
PAGE 2
Step 7: Your “PQI Air” Pen becomes a wireless access point when plugging in an Ethernet cable. Preferences: The following settings are available in the “PQI Air Pen +” "Settings" menu. ‐"Wi‐Fi SSID": Change the name of your “PQI Air” Pen. (It is recommended that you change your own SSID) ‐"Password/Change Password": Enable password and setup a password to protect data from being accessed by unauthorized connections.
PAGE 3
cause undesired operation. For product available in the USA/Canada market, only channel 1~11 can be operated. Selection of other channels is not possible. IMPORTANT NOTE: Federal Communication Commission (FCC) Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in ANSI/IEEE C95.1‐1999 and had been tested in accordance with the measurement methods and procedures specified in OET Bulletin 65 Supplement C.