LM121B User Manual GSM, Digital and Bar mobile phone Basically brief introduction Thank you for choosing the GSM digital mobile phone designed
and produced by our company, this mobile phone has passed 1.6 meter drop test, reached the waterproof and dustproof grade IP57, also it supports FM radio, 5 groups of call filter list etc, it provides satisfying service for you and your family by its safe and reliable features. The mobile phone not only supports the functions of basic voice call, short message, etc.
Right statement Any content in the user manual is strictly prohibited from being copied, transferred, distributed and saved in any condition of no beforehand written permission of the company. The company keeps the right for amending and improving any product described in the manual in the condition of no notice in advance by the principles of continual perfection and sustainable development.
(1) Phone Appearance Specification Frequency: GSM 900/1800/1900 MHZ Size: 111*49*20mm 4
Talk time: 180min Standby time: 130h Screen: 1.44 inch CSTN Screen Phonebook capacity: 500 records Message capacity: 100 Battery: 650mAh Speaker: Single Temperature: -20℃ to 55℃ Antenna: Inside IP57: It will protect the mobile phone from the harmful dust and the liquid with all direction and there will no destructive effect to the functions of the phone itself.
Menu Content Time Manager Alarm Clock Memo Calendar Set Clock Auto on / off Profiles Standard Conference Outdoor Silence Tools Calculator Timer Unit Conversion Electric Torch 6
Phone book SIM Phonebook My Phonebook Browse all Create Copy All Delete All SDN Phonebook Speed Dials Group Memory Status Short Message Inbox Create message Outbox Draft box Voice Mail 7
Settings Memory Status Broadcast Message Setting Call records All calls Phone settings Dialed calls Network settings Missed calls Call settings Received calls Shortcut setting Delete all Call filter list Call duration FM radio .
Battery usage Installing battery 1.Referring to the picture and insert the battery. 2. Insert the battery cover to the slot → press the tail of the cover → close the battery cover as per the picture shows. 3. Remove battery:press to lock and lift the battery cover, take out the battery. Charging 1. Put the charger into the charger port of the phone.
2. Put another side of the charger to electrical outlet then start charging. 3. When charging is complete, disconnect the connector from the phone and unplug the charger from electrical outlet. Battery maintenance: 1. Make sure charge the battery fully for first time usage. Remove the charger after charging 2. It’s strongly recommended to use original charger and cable from the phone manufacture. Third party products may reduce the use of the product performance or threaten your health and safety. 3.
Inserting/Removing the SIM card 1. Power off the unit and remove the batter cover and battery. 2. Insert the SIM card into the card slot as per the picture shows. 3.Install the battery and the cover. 4.Remove SIM card by sliding out the card from reverse side. (2) Common Functions Power on/off 1. With enough quantity of electricity, press power on or off. 2. If unlock code is required, enter the digits of 0000.
Making a call A:You need to power on the phone and make sure you are in the network service area. 1. Enter the phone number you want to call with country or region code if needed, press to make a call。And press for call ending and back to the standby interface. 2. You can dial a phone number in the phone book or call record list. Please refer to the phone book and call record menu. B:Making a international call.
Hands free Press right key→ choose “hands free” to switch between earphone receiver or loudspeaker/ Reject a call when there’s a incoming call, press or left key to choose “ reject” to reject a call. Call option During a call, press left soft key to call option menu to select mute, accept or reject etc. Missed call checking Press to check the call list Make an emergency call This phone supports emergency call. emergency call number)then press Enter 112(International .
Press left button or Confirm button=>Alarm Clock=>Edit Alarm Clock (3 alarm clock at most), one-time alarm clock or cycle alarm clock=>directly input numbers or use up / down button to choose the alarm time=>choose alarm ring tones=>setting completed. Users can clear single alarm clock and clear all the alarm clock settings. 1.2 Memo Book Choose Memo, press left button or confirm button to create memo, including date and memory contents, the alarm will ring when it gets to the set time.
1.5 Power on / off Setting Press left button or confirm key=>set the power on / off time=>directly press numeric key or up down button to choose the time=>finish setting; Select ”clear” to clear all the current setting. 2) Profiles You can use the profile settings(like ring tones, volume and vibration etc.) for different situation, including standard mode, meeting mode, outdoor mode and silence mode. Factory default mode is standard mode.
and division. Under Calculator menu, press right button to change the positive or negative sign, square root, square => confirm to calculate the result, right button is used to delete numbers or return. 3.2 Timer: this function is used as the stopwatch, press left button to start or pause the stopwatch, confirm key/down button is used to save current time(it can save 4 different time). Right button is for returning, “*” key is for clearing the saved time and re-start to count the time. 3.
quick search, press left or confirm key => Option, to open options. Call: directly call the selected number Sending SMS: Type the SMS message and send to the selected number Edit: Modify the related information Create: Create the new contact to the phonebook Delete: Delete the information of the selected contact number Copy to my phonebook: Copy the contact information from SIM card to phone. Memory status: check the total capacity of the SIM card/used and phone total capacity / used space. 4.
out the records. 4.4 Create New Contact It is used to create contact numbers to the SIM card or Phone phonebook. 4.5 Copy All 1) From SIM card to phone: copy the phonebook of SIM card to Phone, 2) From phone to SIM card: before the SIM card is full, copy the phonebook of phone to SIM card. 4.6 Delete all the records 1. Delete phone records: delete all the contact records of the phone. 2. Delete SIM card records: delete all the contact records of the SIM card. 4.
Voicemail(Check local operator about this function). 4.9 Groups Left button=>choose group name=>group list=>create new contact=>added to phone’s phonebook, or right button=>Phonebook, create contact=>add a new group, then you can check the group member list in “Group Member”. “Re-set Names” is used to re-name the current group, “ring tone” menu is used to set the ring tone for the group. 4.
back, and extract, if no message, the inbox is “blank” 5.2 Create Message You can edit new massage ( input methods, please refer to after description_ After completing the new massage, you can choose send, save, send and save, and send to multi-recipients (five numbers you can choose at most) 5.3 Outbox In the outbox, it saved the send and save massages and failed sending massages, you can choose to delete, transmit, call back and extract . 5.
press upper and down navigation key to choose the item, press the left and right navigation to set the data. Press right soft key to save the settings. 2. Status report and answer path It is used to set the message status report returning and replying path. 3. Storage space Set the space for storing the SMS, users can set storing in the phone or SIM card preferable. 5.
6) Call Records 6.1 All the calls This function is to keep records automatically on latest dialed, received or missed call numbers, and can check the details of these numbers(Name, Numbers, Date, Time), dial out, send SMS, Delete, Save the numbers, Modify the numbers, Delete all, list the numbers, add to firewall, etc. 6.
6.5 Delete All This function is used for deleting missed calls, received calls and dialed calls records. 6.6 Call Duration It used for recording the duration of recently dialed call, received call, and last call, press left key and clear all the records. 7)、Settings 7.1 Phone settings 7.1.1 Display Settings 1) LCD Contrast Press the left key to enter into contrast adjustment, adjust the contrast number through left and right navigation key.
You can set power on greetings not more than 10 characters. 5) Language You can set the language through upper and down navigation key to choose. 6)Number’s home display. Press left soft key to enter in this function, through the up or down navigation key to choose “open” that means when you received a call, it will reveal incoming telephone place, or choose “Close” that means it won’t reveal the incoming telephone place. 7.1.
are required to input PUK code to unlock. If the PUK code is lost, please contact your Telecom Operator. The default PIN1 code is “1234”. 7.1.3.2 Change PIN2 Input correct old PIN2 code, then re-set PIN2 code. 7.1.3.3 Phone Lock By virtue of this function, you can lock/unlock the mobile phone by inputting phone password. The default password is “0000”, users can re-set the password. 7.1.3.4 Privacy Lock Turning on this function, it can prevent others checking the call logs, SMS and phonebook records.
steps shown to unlock; Otherwise, all the other keys do not work. 7.1.8 Factory Default Restore the phone settings to factory default settings, default password is “0000”. 7.2 Network Setting 7.2.1 Calling Waiting After activating this function, the calling number will be shown on the screen and give voice reply(Need network support); If turning off this function, the phone will not give voice reply, and the caller will hear the line is busy 7.2.
following functions can be set on, off and searching: All outgoing calls: All the number being dialed out will be restricted. All International Calls: International calls will be restricted. Int’l calls except for home: Forbid dialing any numbers beyond of SIM card provider’s country. All incoming calls: No call will be received if activating this function. Incoming calls while Roaming: same steps as above “Forbid calling”. 7.2.
7.3.4 Any key answer Use up or down button to turn on / off this function to set if you can pick up the calls by pressing any key. 7.5 Select Line This function is to set the network line switch of SIM 1, it can select “Line 1” or “Line 2”(need the local network support, suggest to choose “Line 1”). 7.4 Shortcuts This can set the function of up/down/left/right navigation keys. After setting, users just need to press these buttons and have the shortcut function. 7.
choose the game options, like “New Game”, “Continue”, “Select Game Level”, etc. Game Setting is used to set the game volume. Inputting Method Keypad Definition Confirm Key: used to confirm sending, saving, etc under message inputting interface. Left Key: Confirm the content input. Right Key: Cancel or clear, long press right key to clear the content input. * Key: Press this key to go to symbol selection interface.
When inputting the words, press * button to change the words to be capital or small caps. Press once to make the first letter to capital, press twice to make the whole word to be capital, press thrice to make the whole word to be small caps. 4. Intelligent English Inputting Method When input the words under Intelligent English Inputting Method, it will show related words beginning with the letter input, Use up or down button to select the combination of the words. 5.
FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types LM121B (FCC ID: ZLELM121B) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use at the ear is 0.885W/kg and when properly worn on the body is 1.03W/kg. This device was tested for typical body-worn operations with the back of the handset kept 1.5cm from the body.