Portable Speaker Lantern Please read these instructions carefully before using and keep for future reference. Forward Industries, 33401. U.S.
Technical Specification Ambient temperature for operation: LEDs: LEDs Rated Watt: Battery: Remote control battery: Remote control effective distance: Charging time: Operation time: Charger - USB Cable Speakers: IP protection: Classification of radiation: -14˚ C to 35˚C 3pcs RGB+3pcs White, 7 Colours 0.2W max per piece 3.7V Lithium 1500mAh CR2025 (3V) 3.15~3.
Bluetooth Function 1. Make sure the battery is fully charged before attempting to connect the first time. 2. For stereo sound, it is possible to connect and pair up to 2 speakers to your device at the same time. 3. To connect the 1st speaker, press the ON/OFF button on the bottom of the speaker. There will be an audible activation beep and the blue indicator light will flash. 4. On your phone/smart device, turn Bluetooth to ON and select "KBPB Speaker Lantern" from the device list.
SETTING TIMER The Timer function allows the product to automatically turn off after a set amount of time. In order to set the timer, press the TIME Button (located on the Remote Control) once to change color, each color indicates a different Timer Duration. The Speaker will stay lit the LED Color that is chosen for the entire Timer Duration. Follow the Guide Below: LED Color Timer Duration Red 30 min. Green 60 min Blue 90 min Yellow 120 min. Light Blue 150 min. Note: To deactivate the Timer, Pink 180 min.
REPLACING REMOTE CONTROL BATTERIES • Removing the old battery by pressing the tab on the side of the battery cover and then sliding off the cover from the remote control. • Take notice of the positive (+) and negative(–) direction of the battery. Make sure that the new battery (CR2025) is inserted the right way. • Dispose of the old battery responsibly. Warnings and Cautions These products and their packaging are not toys; please keep out of reach of children.
Warranty Information • 1 year for electronic part • 2 year for housing After Sales Support / Product Returns If you have questions regarding the operation of your purchase, or in the unlikely event you need to return the unit because it is faulty or is no longer wanted, please contact our product returns department at customerservice@forwardindustries.com, or 561-465-0030, Option 0.
Portable Speaker Lantern Please read these instructions carefully before using and keep for future reference. Forward Industries, 33401. U.S.
IP20 Le chargeur et la télécommande ne sont pas étanches et doivent être gardés à l'intérieur dans un endroit sec. Ne pas charger ce produit à l'extérieur. The charger and the remote control are not waterproof and must be kept indoor in a dry location at all time. Never charge this product outdoors. LED: 3pcs RGB + 3pcs White, 0.6W MAX Speakers: 5W Batterie rechargeable (lithium) 3,7V 1500 mAh Radio fréquence 2.402GHz-2.
CONNEXION VIA BLUETOOTH/CONNECTING VIA BLUETOOTH 1. Assurez-vous que l'enceinte est sous tension et complètement chargée avant de tenter de vous connecter pour la première fois. Make sure the Speaker is powered ON and fully charged before attempting to connect the first time. 2. Appuyez brièvement sur le bouton ON/OFF au bas de l'enceinte ou appuyez sur la touche Bluetooth (4) de la télécommande. Il y aura un bip sonore d’activation et le voyant lumineux clignotera.
2. Pour changer le réglage de l'enceinte principale, déconnectez d'abord le Bluetooth de votre liste d'appareils, puis appuyez longuement sur ON/OFF sur le nouvel appareil dont vous souhaitez qu'il soit le principal. Switch the Master setting, disconnect the Bluetooth in your device list firstly and then long pressing the ON/OFF on the new one that you want it to be the master. 3. Cet appareil possède une fonction de stockage de mémoire (si la batterie n'est pas complètement épuisée).
TELECOMMANDE/REMOTE CONTROL Before using the remote control remove the small plastic sheet from the battery cover.
• Débranchez l'adaptateur secteur de la prise de courant principale lorsqu'il n'est pas utilisé. • Ne vous tenez pas debout ou ne sautez pas sur ce produit. • Ne vous asseyez pas sur ce produit s'il est fissuré ou endommagé. • Gardez le produit à l'écart des produits chimiques et de la chaleur. • N'essayez pas de démonter le produit. Utilisation en extérieur: • L'adaptateur externe ne doit pas être utilisé à l'extérieur, à l'abri de la pluie, de l'humidité, de tout liquide ou de la chaleur.
FCC Information This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device complies with Part 15 of the FCC Rules, operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) this device must accept any interference received, including interference that may cause undesired operation.
