JC100 Owner's Manual
JC100 Owner's Manual Package Contents 1. JC100 2. 12 V Accessory Power Cable (cigarette lighter) 3. 3.5mm Earphone with Integrated Volume Control 4. 3.5mm to 3.5mm Accessory Cable 5. USB A to USB Mini B Cable 6. Owner's Manual 7.
Controls and Indicators Front View 1 2 10 9 3 8 4 5 6 7 1. DC 12~24V Jack: Connect cigarette lighter power cable from car cigarette lighter outlet. 2. iPod Docking Well 3. LCD Digital Display: Displays FM radio frequency, and indicates Bluetooth and Privacy status in blue light. ? solid blue – Bluetooth cell phone connected ? off/flashes every 3 seconds – Bluetooth seeking mode ? on/off/on every 3 seconds – call privacy mode 4.
Controls and Indicators Side View 11 12 13 11. Audio In: Attach any device with a 3.5mm audio output for playback. 12. USB Charge: Connect USB device for charging (since the 12V accessory outlet is in use by the JC100). This unit does not support USB playback. 13. Audio out: Accepts the 3.5mm earphone for call privacy. NOTE: Audio Out only applies to Bluetooth phone audio.
Installation Spring-Loaded Grip iPod Spring-Loaded Grip 1. Connect the power cable from the JC100 to the vehicle 12V Accessory power outlet (cigarette lighter). 2. Press both sides of the spring-loaded grip and place the JC100 in the cup holder. Power ON/OFF 1. Turn the vehicle ignition on. 2. Press and hold the button for 1 second to turn the JC100 on or off.
Operation Linking the FM Transmitter 1. When the JC100 is powered on, the LCD will show an FM frequency channel (for example, 88.1 Mhz). FM MHz 2. Turn your car radio on and tune to an unused FM station between 88.1 and 107.9 Mhz. 3. Use the QS button on the JC100 to change to the preset frequency nearest the selected car radio frequency. 4. Press the "+" or "-" button to change the JC100 frequency to match the frequency selected on your car radio.
Operation Using the Remote Control 1. FM channel up. iPod menu up. 5 1 2. FM channel down. iPod menu down. 3 4 3. Previous file. Press and hold for iPod fast reverse. 2 4. Next file. Press and hold for iPod fast forward. 6 7 5. Play/Pause playback. Menu Enter Press and hold to put iPod in sleep mode. 8 9 QS 6. Answer incoming Privacy iPod call/redial last call/access iPod menu. Press and hold to switch between cell phone and Bluetooth. 7. Reject incoming call/hang up current call.
Operation Docking an iPod 3 1 2 4 1. Press the release buttons on either side of the unit to unlock side brackets. 2. With the release buttons pressed, pull brackets apart to make room for your iPod. 3. Place iPod in docking area and adjust brackets for a secure fit (see step 2). 4. Turn adjustment knob to adjust for iPod thickness.
Operation Pairing a Bluetooth Phone to the JC100 1. For your safety, please park your car before you begin. 2. Power on the JC100. The LCD will automatically begin seeking a Bluetooth device when powered on, as indicated by the LCD light flashing blue once every 3 seconds. This initial seeking period lasts approximately for 1 min and 30 seconds. If the LCD stops flashing, press the Phone button on the JC100 to activate seeking mode again. 3. Place your Bluetooth enabled cell phone close to the JC100.
Operation Using your Bluetooth Cell Phone with the JC100 1. The JC100 with microphone, coupled with the car speakers, works like a Bluetooth headset for your cell phone. 2. When you dial out from the cell phone, the JC100 will pause iPod music automatically and switch to phone use. You can put down the phone and talk normally with the other party. Your voice enters the JC100’s Microphone and other party’s voice is heard through your car speakers (via FM transmission from the JC100 to your car stereo).
Operation FAQs (Frequently Asked Questions) Q1) What should I do if the JC100 does not function normally? A1) Please verify that all wires or cables are securely connected and that the iPod is docking properly. Also verify that 12V accessory power outlet is working properly. Please make sure the JC100 and cell phone are turned on and connected. Q2) Why doesn’t my phone work with the JC100? A2) First make sure your cell phone is Bluetooth equipped.
Operation FAQs (Frequently Asked Questions) - CONT. Q5) Why does the other party occasionally hear noise in the call? Why isn’t the phone call quality through the JC100 as clear as the direct phone to phone call? A5) When the JC100 is in a very noisy environment, such as driving on the freeway with the windows down, its noise cancellation features becomes active.
Warranty Limited One Year Warranty Warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)The device may not cause harmful interference, and (2)this device must accept any interference received, including interference that may cause undesired operation. Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment .
