User's Manual

FAQs (Frequently Asked Questions)
5. You will most likely not listen to your iPod all the time while
driving. You will probably also listen to FM /AM radio
stations or your CD player. However when you hear the
phone ring, you need to switch to the FM channel for the
BTCup to be able to listen to the other party and start the
conversation.
6. The BTCup can be paired with multiple cell phones, but it
can only memorize the last connected phone. To use
another phone, please turn off the Bluetooth in the last
connected phone to release the BTCup, the LCD screen
will flash blue. If another phone has the BTCup in its
Bluetooth device list, you can select the BTCup and bond
with it again. Otherwise, pair them like a new connection.
7. When you do not need the BTCup for phone call, please
press and hold down On/Off button for 1 second to turn
the BTCup off.
3
6
Q3) What should I do, if music or voice output from the
car radio is distorted?
A3) Please stop and park the car safely first if you are driving,
then change to another frequency channel until it is clear.
Q4) After the BTCup is powered off, why does my iPod
change to pause?
A4) When the BTCup is switched to off or cigarette lighter
power stops after car engine is turned off, iPod playing
will change to pause and eventually iPod will be turned
off to save power. If you want the iPod continues playing,
please press play button on the iPod.
Q5) Why does the other party occasionally hear some
kind of noise in the call? Why isn’t the phone call
quality through the BTCup as clear as the direct
phone to phone call?
A5) When the BTCup is in a very noisy environment such as
driving on the freeway, its noise cancellation kicks in,
which might introduce some other kind of sound(noise)
or make your voice appear slightly distorted to the other
party occasionally. This is normal.
7
Q1) What should I do, if the BTCup does not function
normally?
A1) Please check all the wires or cables are connected,
and iPod is docking properly, whether the power of
your cigarette lighter is working properly. Please
make sure the BTCup and the cell phone are turned
on and connected.
Q2) Why doesn’t my phone work with the BTCup?
A2) First make sure your cell phone is Bluetooth equipped.
For the first time use, please pair the phone with the
BTCup so that the LCD shows solid blue color. If your
phone has worked with the BTCup before but not
anymore, and there is no other Bluetooth headset or
cell phone around connected currently, the last thing
you can do is to delete the BTCUP Handsfree device
from your phone and pair it with the BTCup to start all
over again.
Important Notice
This product should be kept in dry condition and
away from water.
Keep the product away from direct sunlight or high
temperature environments.
Please unplug the power plug when it is not in use.
Copyright 2007 by Macally Peripherals v3.0
This manual is furnished under license and may be used or
copied only in accordance with the terms of such license.
Except as permitted by such license, no part of this
publication may be reproduced, stored in a retrieval system,
or transmitted, in any form or any means, electronic,
mechanical, recording, or otherwise, including translation to
another language or format, without the prior written
permission of Macally Peripherals. The content of this manual is
furnished for informational use only, is subject to change without
notice, and should not be construed as a commitment by Macally
Peripherals. Macally Peripherals assumes no responsibility or
liability for any errors or inaccuracies that may appear in this
book. All other product names, trademarks and registered
trademarks in this document are the property of their respective
holder.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference and (2) this device must accept any
interference received, including interference that may cause
undesired operation. Operation of this equipment in a residential
area is likely to cause interference in which case the user at his
or her own risk and expense will be required to correct the
interference.
NOTE(1):
This equipment has been tested and found to comply with the
limits, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, or
modified not expressed approved by the party responsible for
compliance, may cause harmful interference to radiocommunica-
tions.
NOTE(2):
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
BTCup User's Guide
Package Contents:
BTCup Hardware Basics
1) BTCup
2) Cigarette lighter power cable
3) 3.5mm earphone for call privacy use
4) 3 types of iPod docking inserts:
Nano dock insert: for 1st and 2nd generation iPod nano
Small dock insert: for 5th generation 30GB iPod
Large dock insert: for 4th generation iPod 20/30GB,
5th generation 60/80GB iPod,and iPod Mini
5) This User’s Guide
Product Registration
Please register this product at
www.macally.com/register.html
This will help you obtain the latest drivers, updates, technical
support and new Macally product release information.
About Macally Products and Services
Setting up FM Transmitter
More information about Macally products and services
is available through the following sources:
http://www.macally.com or
http://www.macally-europe.com
Macally Technical Support:
In U.S.A, please call 1-909-230-6778 or in other areas,
E-mail us at techsupport@macally.com
1. For safety, please do not drive and operate BTCup at the
same time.Install the proper iPod docking insert into the
BTCup for your iPod.
2. Connect the power cable from the BTCup into car
Cigarette lighter outlet. Plug 3.5mm earphone into Audio
out jack in the BTCup.
3. Press the spring loaded grip and seat the BTCup to car
cup holder securely.
4. Make sure the BTCup is powered on. You might need to
start the car engine in order to do so.
5. The LCD display will show a FM frequency channels
(For example, 88.1MHz).
1 DC 12~24V jack (Connect cigarette lighter power cable from car
cigarette lighter outlet)
2 Audio out (Accepts the 3.5mm earphone for call privacy)
3 iPod Docking Well
4 Power/ Privacy Button(Press it and hold for 1 second to turn
on or off the BTCup; During the phone call, press it briefly to mute
the car radio for call privacy)
5 Frequency Down Button (Decrease FM frequency)
6 Phone Button(Answer call/Hang up/BT Reconnect. Press it to
answer or hang up the phone call, or press it to reconnect with your
cell phone if the blue light in LCD is off)
7 QS Button (To quick switch and access four preset frequencies
88.1, 94.1, 100.1 & 106.1MHz)
8 Frequency Up Button (Increases FM frequency)
9 LCD Digital Display (Displays FM radio frequency, and
indicates Bluetooth and Privacy status in blue light. Solid blue –
Bluetooth cell phone connected; Off and flashes every 3 seconds –
Bluetooth seeking mode; On and off then on every 3 seconds – call
privacy mode)
10 Microphone
QS
++
1
2
3
4
5
6
7
8
9
iPod Spring
loaded
grip
When fitting the BTCup into car cup holder, press
the spring loaded rubber grips as shown below
iPod
1 2
3
MHZ
CUP
by macally
10
Power ON/OFF
Press and hold for 1 sec to turn BTCup on or off. Default
is On.
6. Turn on your car radio, tune to FM band. We suggest you
looking for a station between 88.1 and 107.9MHz not
currently used or with weak signal in your local broadcast.
7. After you have set a frequency channel in radio, first use
QS button to change frequency display to the nearest
preset frequency, then press "+" or "-" buttons to match
the frequency channel to the car radio. For example, if
the radio frequency is on 95.1MHz, the BTCup needs to
be set to 95.1MHz as well. Then the static noise in the
car radio will disappear.
8. Dock iPod securely into the BTCup, iPod starts charging.
Play music from iPod, music will come out from car
speakers. Adjust the volume in your car radio if necessary.
9. You may need to change the channel occasionally due
to interference which may occur in some areas while you
are driving.
Pairing your Bluetooth Cell Phone with the BTCup:
1. For the safety concern, please park your car first. Power
on the BTCup. LCD light stays off and flashes blue once
every 3 seconds, indicating the BTCup is seeking to
reconnect your Bluetooth cell phone. This initial seeking
period lasts for 1 min and 30 sec approximately.
2. If this is the first time you’ve connected your cell phone
to the BTCup, keep LCD flashing blue. If the LCD stops
flashing, press the Phone button on the BTCup to bring
it to seeking mode again. Please place the cell phone
close to the BTCup, go to Bluetooth setup in the cell
phone and turn on Bluetooth, Select Handsfree, then
[Look for Devices]. Once the phone discovers the BTCup,
select and bond with it, enter the passkey 0000 by the
phone keypad to complete pairing process. When
connected to your cell phone successfully, the BTCup
LCD will change to solid blue.
4
Using Cell Phone with the BTCup:
5
3. Please note the pairing procedures are different from phone
to phone. The above example serves as a general direction.
You only need to do Bluetooth pairing once for a cell phone,
next time when you start the car, the BTCup will power on
and reconnect to your cell phone automatically as long as
your phone has the Bluetooth turned on and is within 20ft to
the BTCup.
1. The BTCup and its Microphone coupled with the car
speakers work exactly like a Bluetooth headset for your
cell phone.
2. When you dial out from the cell phone, the BTCup will
stop iPod music automatically if it is playing and switch to
phone use. You can put down the phone and just talk
normally with the other party, your voice goes into the
BTCup’s Microphone and other party’s voice comes out
from your car speakers. When finished, you can press the
BTCup Phone button to disconnect the call, or hang up
from your cell phone, or just wait for the other party to end
the call. The iPod music will resume automatically if it was
playing before the call.
3. If a phone call comes in, your cell phone will ring, the
BTCup also switches from iPod to the phone. If your cell
phone is setup to auto-answer, the BTCup will connect the
call after 2 to 3 phone ring. If you do not have auto-answer
setup, you can choose to answer from the phone or simply
by pressing the BTCup Phone button.
4. If you don’t want other passengers in your car to listen to
the other party, once the call is started, press the Privacy
button, and wear the included earphone to listen to the
other party. In the Privacy mode, LCD stays solid blue and
flashes briefly off and on every 3 seconds. Please note the
Privacy is per call only, after the call, Privacy is turned off.
On O ff
Pri vacy
/
8
9 10
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
Changes or Modifications to the equipment not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Declaration of Conformity
Macally Peripherals, declares that the BTCup conforms to the
following standards, in accordance with the provisions of the EC
Directive 89/366/EEC: EN 55022 (CISPR 22:1985), Class A.
Warranty
Macally Peripherals warrants that this product will be free from
defects in materials and workmanship for period of time specified
on the product packaging. This limited warranty shall commence
from the date of purchase. Macally Peripherals warranty is not
transferable and is limited to the original purchaser. If the product
is found to be defective then, as your sole remedy and as the
manufacturer's only obligation, Macally Peripherals will repair or
replace the product. This warranty shall not apply to products
that have been subjected to abuse, misuse, abnormal electrical
or environmental conditions, normal wear and tear or any
condition other than what can be considered normal use.
Limitation of Liability
The liability of Macally Peripherals arising from this warranty and
sale shall be limited to a refund of the purchase price. In no
event shall Macally Peripherals be liable for costs of procure-
ment of substitute products or services, or for any lost profits, or
for any consequential, incidental, direct or indirect damages,
however caused and on any theory of liability, arising from this
warranty and sale. These limitations shall apply not with standing
any failure of essential purpose of any limited remedy.
DISCLAIMER:
Mace Group, Inc. located at 4601 E. Airport Drive, Ontario,
CA 91761 does not endorse the use of Macally products
while simultaneously operating a vehicle. For your own
safety and the safety of other drivers, please read the
product's manual and set the channel before driving, do not
attempt to adjust the screen or operate the buttons while the
vehicle is in motion, please pull over safely before using
buttons or adjusting the channel. Drive carefully and always
obey traffic laws and road signs.
Front
Back
375.0 mm
115.0 mm

Summary of content (1 pages)