Data Sheet

ManualsBrandsPosital Fraba ManualsActive ComponentsPosital Fraba Absolute Rotary encoder 1 pc(s) UCD-S101B-1212-3A7A-2AW Magnetic Square

Data Sheet

Printed at 28-09-2017 00:09

- 1 / 5 -

IXARC Absolute Rotary Encoder

UCD-S101B-1212-3A7A-2AW

This product is a lab sample

Interface

Interface SSI with Preset

Programming Functions Absolute: Resolution, Revolution, Code, Preset

Manual Functions Preset + complement via cable or connector

Interface Cycle Time ≥ 25 µs

Number of Preset Cycles 5,100,000

SSI Format MMMMMMMMMMMMSSSSSSSSSSSS00

Video Manual

Watch a simple installation video

Outputs

Output Driver RS422

Electrical Data

Supply Voltage 4.5 – 30 VDC

Current Consumption Typical 50 mA

Power Consumption ≤ 1.0 W

Start-Up Time < 250 ms

Clock Input RS 422, via Optocoupler

Clock Frequency 100 kHz – 2 MHz

Reverse Polarity Protection Yes

Summary of content (5 pages)

PAGE 1
IXARC Absolute Rotary Encoder UCD-S101B-1212-3A7A-2AW This product is a lab sample Interface Interface SSI with Preset Programming Functions Absolute: Resolution, Revolution, Code, Preset Manual Functions Preset + complement via cable or connector Interface Cycle Time ≥ 25 µs Number of Preset Cycles 5,100,000 SSI Format MMMMMMMMMMMMSSSSSSSSSSSS00 Video Manual Watch a simple installation video Outputs Output Driver RS422 Electrical Data Supply Voltage 4.
PAGE 2
Short Circuit Protection Yes EMC: Emitted Interference DIN EN 61000-6-4 EMC: Noise Immunity DIN EN 61000-6-2 MTTF 350 years @ 40 °C Sensor Technology Magnetic Resolution Singleturn 12 bit Resolution Multiturn 12 bit Multiturn Technology Self powered magnetic pulse counter (no battery, no gear) Accuracy (INL) ±0.
PAGE 3
Permanent Shock Resistance ≤ 10 g (half sine 16 ms, EN 60068-2-29) Vibration Resistance ≤ 10 g (10 Hz – 1000 Hz, EN 60068-2-6) Length 45,5 mm (1.79") Weight 405 g (0.89 lb) Electrical Connection Connection Orientation Axial Cable Length 2 m [79"] Wire Cross Section 0.14 mm² / AWG 26 Material / Type PVC Cable Diameter 6 mm (0.24 in) Minimum Bend Radius 46 mm (1.81") fixed, 61 mm (2.
PAGE 4
2D Drawing Accessories Coupling Bellow Type-10-(3/8") Coupling Bellow Type-06-(3/8") Coupling Jaw Type-10-(3/8") Coupling Jaw Type-06-(3/8") Coupling Jaw Type-12-3/8" More Contact POSITAL Contact Us Data Sheet Printed at 28-09-2017 00:09 -4/5-
PAGE 5
The picture and drawing are for general presentation purposes only. Please refer to the "Download" section for detailed technical drawings. All dimension in [inch] mm. © FRABA B.V., All rights reserved. We do not assume responsibility for technical inaccuracies or omissions. Specifications are subject to change without notice.