Data Sheet

ManualsBrandsPosital Fraba ManualsEncodersPosital Fraba Incremental Rotary encoder 1 pc(s) UCD-IPT00-00256-R100-PRF Magnetic Synchro flange 36 mm

Data Sheet

Printed at 15-02-2018 17:02

- 1 / 5 -

IXARC Incremental Encoder

UCD-IPT00-00256-R100-PRF

Interface

Interface Programmable Incremental

Programming Functions PPR (1-16384), Output, Counting Direction

Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3)

Outputs

Output Driver RS 422 (TTL)

Output Incremental A, /A, B, /B, Z, /Z

Quadrature Phasing 90° ± 4.5° electrical

Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage

> V-3 V @ 9-30 V Supply Voltage

Output Voltage Low Level Push-Pull (HTL) < 0.5 V

Output Voltage High Level RS422 (TTL) > 4 V

Output Voltage Low Level RS422 (TTL) < 0.5 V

Maximum Frequency Response 1 MHz

Maximum Switching Current 50 mA per Channel

Electrical Data

Supply Voltage 4.75 – 30 VDC

Current Consumption ≤140mA @ 5V DC, ≤70mA @ 10V DC, ≤40mA @

24V DC

Power Consumption ≤ 1.0 W

Start-Up Time < 250 ms

Min. Load Resistance 120 Ω

Reverse Polarity Protection Yes

Short Circuit Protection Yes

EMC: Emitted Interference DIN EN 61000-6-4

EMC: Noise Immunity DIN EN 61000-6-2

MTTF 280 years @ 40 °C

Sensor

Technology Magnetic

Accuracy (INL) ±0.0878° (≤ 12 bit)

Duty Cycle 180° ± 27° (Speed > 100RPM)

Summary of content (5 pages)

PAGE 1
IXARC Incremental Encoder UCD-IPT00-00256-R100-PRF Interface Interface Programmable Incremental Programming Functions PPR (1-16384), Output, Counting Direction Configuration Tool UBIFAST Configuration Tool (Version ≥ 1.6.3) Outputs Output Driver RS 422 (TTL) Output Incremental A, /A, B, /B, Z, /Z Quadrature Phasing 90° ± 4.5° electrical Output Voltage High Level Push-Pull (HTL) > 4 V @ 4.75-9 V Supply Voltage > V-3 V @ 9-30 V Supply Voltage Output Voltage Low Level Push-Pull (HTL) < 0.
PAGE 2
Phase Angle 90° ± 14° (Speed > 100RPM) Environmental Specifications Protection Class (Shaft) IP65 Protection Class (Housing) IP65 Operating Temperature -40 °C (-40 °F) - +85 °C (+185 °F) Humidity 98% RH, no condensation Mechanical Data Mechanical Data Housing Material Steel Housing Coating Cathodic corrosion protection (>720 hrs salt spray resistance) Flange Type Synchro, ø 36 mm Flange Material Aluminum Shaft Type Solid, Length = 20 mm Shaft Diameter ø 10 mm (0.
PAGE 3
Product Life Cycle Established Connection Plan SIGNAL PIN NUMBER A A /A H B B /B I Z C /Z J Power Supply D GND F Shielding Connector housing Connector-View on Encoder Pulse Diagram Rotation Clockwise (seen on shaft) Data Sheet Printed at 15-02-2018 17:02 -3/5-
PAGE 4
2D Drawing Accessories Configuration/Programming Tools UBIFAST Configuration Tool Couplings Coupling Disc Type-10-12 Coupling Bellow Type-10-10 Coupling Bellow Type-06-10 Coupling Bellow Type-08-10 Coupling Bellow Type-10-12 Coupling Bellow Type-10-(1/4") Coupling Bellow Type-10-(3/8") Coupling Jaw Type-06-10 Coupling Jaw Type-08-10 Coupling Jaw Type-10-12 Coupling Jaw Type-10-(1/4") Coupling Jaw Type-10-(3/8") Data Sheet Printed at 15-02-2018 17:02 -4/5-
PAGE 5
Coupling Jaw Type-10-10 Coupling Disc Type-06-10 Coupling Disc Type-10-10 More Measuring Wheels Measuring Wheels 200mm-Knurled Alu Surface Measuring Wheels 200mm-Smooth PUR Surface Measuring Wheels 200mm-Studded PUR Surface Measuring Wheels 200mm-Corrugated PUR Surface Measuring Wheels 500mm-Knurling Alu Surface Measuring Wheels 500mm-Smooth PUR Surface Measuring Wheels 500mm-Studded PUR Surface Measuring Wheels 500mm-Corrugated PUR Surface More Displays AP20-00 Counter AP20-D0 Counter (4 dig.