User's Manual

ManualsBrandsPosiflex Technology ManualsElectronicsSecurity Device

Page 1

SD-800

UPGRADE KIT

USER’S MANUAL

Rev. : Original

I. FEATURES

 Upgrade kit for fan free touch terminals KS series

 Magnetic Stripe Reader in USB full speed HID interface

 Options for MSR heads covering ISO 1&2, all 3 tracks or JIS I/II

 3 tracks type MSR can read also AAMVA and CA DMV card

 Build-in RFID Reader in USB interface.

 RFID Function provides more security for data contained in tags than on bar code labels.

 RFID Reader supports ISO/IEC 14443A/B Reader/Writer mode up to 848kbit/s.

FCC NOTICE

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause

interference to radio communications. It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC

Rules, which are designed to provide reasonable protection against interference when operated in a commercial environment. Operation of this equipment in a

residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference.

WARRANTY LIMITS

Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians. The user should consult his/her

dealer for the problem happened. Warranty voids if the user does not follow the instructions in application of this merchandise. The manufacturer is by no

means responsible for any damage or hazard caused by improper application.

The hardware utility program, including instructions for its use, is provided “AS IS” without warranty of any kind. Posiflex Technology, Inc. further disclaims

all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose. the entire risk arising out of

the use or performance of the software and documentation remains with you.

ABOUT THIS MANUAL

This manual is written in an attempt with full strength to assist the user to utilize the upgrade kit SD-800 for the Posiflex fan free touch

terminals KS series

systems. This series of products incorporate 2 delicately designed POS peripherals each can be used as an excellent tool to accommodate the required security

specially involved in POS business, kiosk and hospitality operation. This manual covers the conceptual and operational aspects of these units. For technical

aspects involving opening of the unit or option implementation, it is only available to the authorized distributors.

The manufacturer of the SD-800 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due to the rapid

and constant progress and improvement on science and technology. The user may always obtain the most up to date information through any of our web sites:

http://www.posiflex.com or http://www.posiflex.com.tw.

 Copyright Posiflex Technology, Inc. 2009

All rights are strictly reserved. No part of this documentation may be reproduced, stored in a retrieval system, or transmitted

in any form or by any means, electronic, mechanical, photocopying, or otherwise, without the prior written consent of

Posiflex Technology, Inc. the publisher of this documentation

TRADE MARKS AND SERVICE MARKS

POSIFLEX is a registered trademark of Posiflex Technology, Inc. an ISO-9001 and ISO-14001 certified manufacturer.

Other brand and product names are trademarks and registered trademarks and service marks of their respective owners.

II. INSTALLATION

HARDWARE INSTALLATION

Remove the 2 screws which on back of the right side of main

unit as circled in the left picture to remove the cover for side

mount upgrade-kit. Take out the cable inside this cover and

connect it to the white connector which is inside the upgrade-

kit as arrowed in the right picture. Gently arrange the excessive

length of this cable and screw-fit the SD-800 back to the

position which occupied by the cover originally. Please reserve

the cover if there is chance to have the side mount kit removed

in the future.

If the ordered SD-800 is RFID only model, please refer to the following steps:

(A).Please unfastens the screws which fix the bottom cover.

(B) Open the plastic bottom cover as arrowed direction in the picture B and separate it from the

SD main unit.

(D) Fix the screws which unfasten in the step 1.

P/N: 19860900010

警告使用者

警告使用者警告使用者

警告使用者

這是甲類的資訊產品，在居住的環

境中使用時，可能會造成射頻干

擾，在這種情況下，使用者會被要

求採取某些適當的對策。

T31454

Summary of content (3 pages)

PAGE 1
SD-800 UPGRADE KIT USER’S MANUAL Rev. : Original I. FEATURES Upgrade kit for fan free touch terminals KS series Magnetic Stripe Reader in USB full speed HID interface Options for MSR heads covering ISO 1&2, all 3 tracks or JIS I/II 3 tracks type MSR can read also AAMVA and CA DMV card Build-in RFID Reader in USB interface. RFID Function provides more security for data contained in tags than on bar code labels. RFID Reader supports ISO/IEC 14443A/B Reader/Writer mode up to 848kbit/s.
PAGE 2
After finish these steps, please fix the SD-800 which in the occupied by the cover originally on back of the right side of main unit. For optional Wi-Fi module, it will come separately with SD-800. Please follow procedures from A to D to install the SD-800 installation. (A) Please unfastens the screws which fix the bottom cover. (B) Open the plastic bottom cover as arrowed direction in the picture B and separate it from the main unit. (C) Please unfastens the rubber block which squared in the picture C.
PAGE 3
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.