MT-4308W/4310W/4210A Mobile Terminal System User Manual MT-4308W/R MT-4310W/R MT-4210A/R Package Contents MT-4308W/R or MT-4310W/R or MT-4210A/R (x 1) Pistol grip (x1) 15W power adaptor (x 1) Stylus (x 1) RB-3000 Battery pack for pistol grip (x 1) User manual (x 1) Barcode scanner user manual (x 1) MT-4308W/H MT-4310W/H MT-4210A/H Package Contents MT-4308W/H or MT-4310W/H or MT-4210A/H (x 1) 15W power adaptor (x 1) Stylus (x 1) User manual (x 1) MT-4308W/4310W/4210A is require
Product Feature Ergonomic Design Pistol grip shape handle is ergonomically designed for easy handling of the tablet. Extra Protection Hand strap strengthens the stability and eases user’s fatigue during the hours of work. All-in-one Solution Optional dock station equips with a built-in 3” thermal printer and various I/O connectivity; once the tablet is integrated with the dock station, an all-in-one POS is instantly at your disposal.
Top View microUSB Port Left Side View Docking Station Connector 5VDC-IN Power Jack Docking Station Locking Hole Right Side View Mic-in/Line-Out Combo Jack Micro SD Card Slot Power Button 3
Views of MT-4310W/H & MT-4210A/H Front View Projected Capacitive Touch Screen 3-track Magnetic Stripe Reader (Optional) LED Indicator Rear View 3-track Magnetic Stripe Reader (Optional) Hand strap Speaker Rear Camera Left Side View Docking Station Connector 5VDC-IN Power Jack microUSB Port Docking Station Locking Hole 4 Mic-in/Line-Out Combo Jack
Right Side View Smart Card Reader (Optional) Power Button Micro SD Card Slot Load RB-3000 Battery Pack and a stylus into Pistol Grip PG200E (for MT-4308W/R & MT-4310W/R & MT-4210A/R) MT-4308W/R, MT-4310W/R and MT-4210A/R with PG-200E pistol grip support 1D CCD, 1D Laser, and 2D barcode scanner. Before the scanner can be initiated, it is required to install the battery pack RB-3000 and a stylus in the battery compartment inside the pistol grip.
3. After having the rail on the battery pack aligned with battery clip, push down the battery pack into battery compartment. 4. Push down the cover to close the battery compartment. Connecting the Pistol Grip onto MT-4308W/R & MT4310W/R & MT-4210A/R MT-4308W/R, MT-4310W/R and MT-4210A/R models are equipped with an additional pistol grip which aims to help users grip the terminal more easily while they are operating the scanner.
3. Make sure the head of the down arrow on the pistol grip is supposed to be aligned with the head of the arrow on the rear side of the tablet as the below figure shows, which indicates the pistol grip is well mounted. 4. To check how much battery capacity remains in PG-200 pistol grip, press the battery capacity checking button on the pistol grip to show the current battery capacity level through the LED indicator.
3. Align the hand strap cover with the grooves on the rear side of the table. 4. Make sure that the hand strap cover is well attached to the rear side of the tablet. 5. Slide the hand strap cover up in the direction indicated by the arrow until it is clicked into place. 6. Fasten the hand strap cover onto the tablet using a screw. Replacing the Hand Strap Cover with a Pistol Grip (Optional) Please follow the below steps to replace the hand strap cover with a pistol grip. 1.
2. Slide the hand strap cover down in the direction indicated by the arrow. 3. Remove the hand strap cover from the rear side of the tablet. 4. Go through the Connecting the Pistol Grip onto MT-4308W/R & MT-4310W/R & MT-4210A/R section which is described previously to complete the installation of the pistol grip onto the tablet. Installing micro SD Card card in MT-series Please follow the below steps complete the installation of micro SD card. 1. Turn off MT-series completely.
Charging the Battery Below are some cautionary advices you need to keep in mind while you attempt to charge the battery. 1. MT-4308W/4310W/4210A is required to be charged over 8 hours when used for the first time. 2. When the low battery warning message appears as shown below, please fully charge the battery to avoid data loss. 3. When the low battery capacity indicator on the pistol grip beams or low battery warning message appears, please charge or replace the battery for the pistol grip immediately. 4.
For MT-4308W/H & MT-4310W/H & MT-4210A/H 1. Find the power jack on the left side of your tablet, and then connect the power connector of the power adaptor to it. 2. Plug the AC power adaptor cord into an electrical outlet to initiate the charging process. Status LED Indicator LED indicator is specially designed to deliver special message regarding the current system status and battery life. The blow chart enumerates all the possible LED indicators and its meaning for your reference.
Operating TA-220/300 Magnetic Stripe Reader (Optional) MT-series models also offer MSR solutions. As optional items, TA-220/300 both allow you to integrate built-in MSR into MT-series tablet. However, TA220 mainly supports MSR with RFID but TA-300 is an attachment combined with three-track MSR and finger printer sensor. Please go through the following instructions on how to operate magnetic stripe reader provided via TA-220/300. 1.
Installing an Operating System You are highly advised NOT to install or change the Windows operating system and drivers which are preloaded on MT-4308W/4310W/4210A without professional instructions. Not only might the careless handling during installation cause irreversible damage to your system, but also the improper installation likely leads to system malfunction or failure. Please contact with your dealers about the issues of operation system installation.
MT-4308W MT-4310W/4210A Audio Mic-in/Line out combo jack x 1 3G Yes, optional USB Port Micro USB x1 (non OTG USB Port) DC-in Jack Yes Power Switch Button Yes Battery Pack 3.7V/ 4800 mAh, 17.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
16
