ITEM #0612664 WALL SCONCE Portfolio® is a registered trademark of LF, LLC. All Rights Reserved. MODEL #B10065 Français p. 9 Español p. 17 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday. 1 Lowes.
PACKAGE CONTENTS A C D E B F G H PART A B C D E F G H DESCRIPTION Canopy Mounting Bracket Threaded Nipple Hex Nut (preassembled to Threaded Nipple (C)) Socket (preassembled to Canopy (A)) Shade Decorative Cap Finial 2 QUANTITY 1 1 1 2 1 1 1 1 Lowes.
HARDWARE CONTENTS (shown actual size) AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 CC DD Threaded Cap Qty: 1 Short Threaded Nipple Qty: 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity.
ASSEMBLY INSTRUCTIONS 1. Orient mounting bracket (B) so the raised center portion protrudes into the outlet box (not included). Remove top hex nut (D) from threaded nipple (C) and screw threaded nipple (C) into middle of mounting bracket (B). Secure threaded nipple (C) to mounting bracket (B) at the top with the removed hex nut (D). Temporally pass canopy (A) over the threaded nipple (C). Adjust threaded nipple (C) until 1/4th of the threads are exposed past the canopy (A).
ASSEMBLY INSTRUCTIONS 3. Pass canopy (A) over the threaded nipple (C) protruding from the mounting bracket (B) and secure in place with threaded cap (CC). 3 B CC Hardware Used CC Threaded Cap x1 C A 4. Screw the short threaded nipple (DD) into canopy (A) 1/4th the way in leaving the majority of the threads exposed. 4 Hardware Used DD 5.
ASSEMBLY INSTRUCTIONS 6. Insert bulb into socket (E). Use 60-watt max. candelabra-base bulb or a CFL equivalent. 6 E CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher.
WARRANTY The Distributor warrants that its products will be free from defects in material and workmanship for one (1) year from the date of purchase by the Original Purchaser. To replace a product that has a warranted defect, the Original Purchaser shall return any allegedly defective parts or products to the authorized Distributor the product was purchased from with PROOF OF PURCHASE, Original Purchaser’s name and return address and a description of the claimed product defect.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-800-643-0067, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
ARTICLE #0612664 APPLIQUE MURALE Portfolio® est une marque de commerce déposée de LF, LLC. Tous droits réservés. MODÈLE #B10065 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 800 643-0067, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi. 9 Lowes.
CONTENU DE L’EMBALLAGE A C D E B F G H PIÈCE A B C D E F G H DESCRIPTION Couvercle Support de fixation Tige filetée Écrou hexagonal (préassemblé à la tige filetée [C]) Douille (préassemblée au couvercle [A]) Abat-jour Capuchon décoratif Embout 10 QUANTITÉ 1 1 1 2 1 1 1 1 Lowes.
QUINCAILLERIE INCLUSE (grandeur réelle) AA BB Capuchon de connexion Vis à métaux Qté : 3 courte Qté : 2 CC DD Capuchon fileté Qté : 1 Tige filetée courte Qté : 1 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Coupez l’électricité avant TOUTE manipulation.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Placez le support de fixation (B) de façon à ce que la partie centrale surélevée sorte du côté de la boîte de sortie (non incluse). Retirez l’écrou hexagonal supérieur (D) de la tige filetée (C). Vissez ensuite la tige filetée (C) au centre du support de fixation (B). Fixez la tige filetée (C) au support de fixation (B) à l’aide de l’écrou hexagonal supérieur (D) que vous venez de retirer. Placez temporairement le couvercle (A) sur la tige filetée (C).
INSTRUCTIONS POUR L'ASSEMBLAGE 3. Placez le couvercle (A) sur la tige filetée (C) qui sort du support de fixation (B) et fixez-le à l’aide du capuchon fileté (CC). 3 B CC Quincaillerie utilisée CC Capuchon fileté x1 C A 4. Vissez la tige filetée courte (DD) au couvercle (A) jusqu’à ce qu’elle soit au quart de sorte à laisser la plus grande partie du filetage dépasser. 4 Quincaillerie utilisée DD 5.
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Vissez l’ampoule dans la douille (E). Utilisez des ampoules à incandescence à petit culot d’un maximum de 60 watts ou des ampoules fluocompactes équivalentes. 6 E ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire.
GARANTIE Le distributeur garantit ses articles contre les défauts de matériaux et de fabrication pour une période de un (1) an à compter de la date d’achat par l’acheteur initial.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 800 643-0067, entre 8 h et 18 h (HNE), du lundi au jeudi, ou entre 8 h et 17 h (HNE) le vendredi.
ARTÍCULO #0612664 Portfolio® es una marca registrada de LF, LLC. Todos los derechos reservados. LÁMPARA DE PARED MODELO #B10065 ADJUNTE SU RECIBO AQUÍ Número de serie Fecha de compra ¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro Departamento de Servicio al Cliente al 1-800-643-0067, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este. 17 Lowes.
CONTENIDO DEL PAQUETE A C D E B F G H PIEZA A B C D E F G H DESCRIPCIÓN Base Soporte de montaje Manguito roscado Tuerca hexagonal (preensamblada al manguito roscado [C]) Portalámpara (preensamblado a la base [A]) Pantalla Tapa decorativa Remate 18 Lowes.
ADITAMENTOS (tamaño real) AA BB Conectores de cables Tornillos Cant.: 3 para metales cortos Cant.: 2 CC DD Tapa roscada Cant.: 1 Manguito roscado corto Cant.: 1 INFORMACIÓN DE SEGURIDAD Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el producto. • • • • • ADVERTENCIA IMPORTANTE: NUNCA intente hacer trabajos sin desconectar el suministro eléctrico. Coloque el interruptor de alimentación principal en la posición “OFF” (APAGADO).
INSTRUCCIONES DE ENSAMBLAJE 1. Oriente el soporte de montaje (B) de modo tal que la sección central elevada sobresalga hacia el interior de la caja de salida (no se incluye).Retire la tuerca hexagonal superior (D) del manguito roscado (C) y enrosque el manguito roscado (C) en el medio del soporte de montaje (B). Asegure el manguito roscado (C) al soporte de montaje (B) en la parte superior con la tuerca hexagonal (D) que había retirado. Pase la base (A) sobre el manguito roscado (C) temporalmente.
INSTRUCCIONES DE ENSAMBLAJE 3. Pase la base (A) sobre el manguito roscado (C) que sobresale del soporte de montaje (B) y asegúrela en su lugar con la tapa roscada (CC). 3 B CC Aditamentos utilizados CC Tapa roscada x1 C A 4. Enrosque el manguito roscado corto (DD) en la base (A) a 1/4 de profundidad para dejar expuesta la mayor parte de las roscas. 4 Aditamentos utilizados DD 5.
INSTRUCCIONES DE ENSAMBLAJE 6. Inserte la bombilla en el portalámpara (E). Use bombillas de base candelabro de 60 vatios como máximo o una bombilla CFL equivalente. 6 E CUIDADO Y MANTENIMIENTO • Siempre asegúrese de que la corriente eléctrica esté desconectada antes de limpiar. • Utilice un paño húmedo suave y jabón suave no abrasivo para limpiar la lámpara. Nunca utilice un limpiador para vidrio en la lámpara, porque éste dañará el acabado metálico.
GARANTÍA El Distribuidor garantiza que sus productos no presentarán defectos en los materiales ni en la mano de obra durante un período de un (1) año desde la fecha de compra por parte del Comprador original.
LISTA DE PIEZAS DE REPUESTO Para obtener piezas de repuesto, llame a nuestro Departamento de Servicio al Cliente al 1-800-643-0067, de lunes a jueves de 8 a.m. a 6 p.m., y los viernes de 8 a.m. a 5 p.m., hora estándar del Este.