User Manual
Table of Contents TABLE OF CONTENTS 02 INTRODUCTION TO YOUR DASH CAM 03 USING CCTV IN A COMMERCIAL ENVIRONMENT 04 PRECAUTIONS / CAUTIONS ON USING THIS PRODUCT 05 FCC STATEMENT 06 FCC-SUPPLIER’S DECLARATION OF CONFORMITY 07 PRODUCT SPECIFICATION 08 PACKAGE CONTENTS / PRODUCT FEATURES 09 POWERED GPS MOUNT 10 FRONT FACING CAMERA - PARTS & CONTROLS REAR FACING CAMERA - PARTS & CONTROLS 11 - 16 17 IN VEHICLE INSTALLATION 18 - 21 CONNECTING YOUR DASH CAM TO CAM VIEWER APP 22 - 23 INSTALLI
Introduction to your Dash Cam The Nextbase range of Dash Cams have been designed specifically with ease of use in mind, it is recommended NOT to change the default settings, which have been carefully selected to give the best performance for day to day use. Basic operation The Dash Cam is set to record video, in files 1 minute in length. This means that each video file is a manageable size should you need to download and send to your insurance company.
Using CCTV in a Commercial Environment When using the NEXTBASE 380GWX in a commercial vehicle you must ensure that you comply with any applicable legislation set out by the Government in your location. The following guide is written for usage of the product in the UK. UK requirements include but are not limited to the Data Protection Act, the CCTV Code of Practice and the Surveillance Camera Code of Practice.
Precautions Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. Radio Frequency Band and Power Information WARNING: Do not expose this product to rain, moisture or water under any circumstances, doing compliance with the following directive 2014/53/EU. The full text of the EU Declaration Of Conformity is available at the following internet address: https://www.nextbase.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
FCC - SUPPLIER'S DECLARATION OF CONFORMITY STATEMENT SUPPLIER'S DECLARATION OF CONFORMITY (47 CFR Section 2.906). We; Tank Design 5. FCC Marking Hereby, Declare that the essential requirements set out in the 47 CFR Sections 2.906 of FCC, have been fully fulfilled on our product with indication below: 6. Responsibilities and obligations Strictly follow the FCC rules of 2.906, 2.908, 2.909. 1.
Product Specification Model Number / Name NBDVR380GWX NBDVR380GWX Rear Camera Power Requirements 5V / 1.5A Video and Power supplied through connection to Dash Cam. Power Supply 12-24Vdc Car Power Cable (supplied) Fuse Type: 20mm / 1.5A Output: 5Vdc Sensor Resolution 2.12M Pixel 2.12M Pixel Lens Type / Angle / Aperture 6G / 140° / F1.8 6G / 140° / F1.
Package Contents Product Features Please check the contents of your NEXTBASE product. Thank you for purchasing this Nextbase Dash Cam, in this section we will outline some of the features available with this Dash Cam. Dash Cam, Mount, & Rear Facing Camera Module Car Power Cable Your Dash Cam and Rear Camera can record both the road and the road behind you Charge your Dash Cam in you vehicle using the Car Power Cable.
Powered GPS Mount Please see below to identify the parts of the supplied GPS mount. 4 3 1 NBDVR380GWMNT Locking Pins These pins will locate and then allow the camera to be attached to the mount. 5VDC-IN 2 For use with 90 connector 2 5VDC-IN For use with straight connector DC-IN Sockets There are two sockets available, one for use with the supplied 90° car adaptor, the other for use with the Nextbase Hardwire Kit (sold separately) which uses a straight connector.
Front Facing Camera - Parts and Controls Please see below to identify the parts and controls of your Dash Cam. Left side: 1 Side Cover There are two types of side cover supplied: Standard covers: These are fitted when the Dash Cam as standard and are used during normal operation. Remember to replace the side cover before use. Locking covers: Included within the Security Pack are two locking covers, these can be secured to the Dash Cam using the supplied anti-tamper screws.
Front Facing Camera - Parts and Controls (contd.) Please see below to identify the parts and controls of your Dash Cam. Right side: 1 1 Side Cover Removable side cover, remember to replace the side cover before use. 2 Anti-Tamper Screw Insert Insert thread for the anti-tamper screw. 3 USB Socket Connect the supplied USB data cable here to connect the Dash Cam to a computer. Note: During normal use the car power cable is connected to the mount, not directly to this socket.