Front Facing Camera - Parts and Controls (contd.) Please see below to identify the parts and controls of your Dash Cam. Top side: 1 2 LED Indicators The functions of the three LED indicators are described in the below table.
Front Facing Camera - Parts and Controls (contd.) 2 Speaker Used for the two types of ‘notification’ sounds. Sounds: There are two sounds, these are used to identify when recording starts and stops. 4 Wi-Fi Button & Indicator Press and hold the Wi-Fi button for 2 seconds to turn on the Dash Cam's Wi-Fi function. Once turned on, the button will flash slowly blue in colour, awaiting a connection from a smartphone / tablet etc. 1.
Front Facing Camera - Parts and Controls (contd.) Please see below to identify the parts and controls of your Dash Cam. Bottom: Note: To format the SD Card using the camera, press and hold the Protect button for 6 seconds. The yellow LED will flicker during formatting. 2 1 Product: 380GWX Model: NBDVR380GWX FCC ID: 2AOT9-NBDVR380GWX 1 Mount to Camera Fixing Points The mount locking pins locate here when attaching the camera to the mount.
Front Facing Camera - Parts and Controls (contd.) Please see below to identify the parts and controls of your Dash Cam. Front and Rear view: 1 1 Front Facing Camera Lens Wide angle 140° field of view. 2 Rear Cam connection point The USB-C connection point for the Rear Camera is located underneath the dust cover.
Rear Facing Camera - Parts and Controls Please see below to identify the parts and controls of your Dash Cam. Left and Right view: 2 1 Top and Bottom view: 1 Rear Facing Camera Lens Wide angle 140° field of view. 2 Rear Cam Cable Connection Cable 30 cm Rear Camera Connection Cable. Attach the 6.5m cable to connect the Rear Facing Camera to the Front Facing Camera. 3 LED Indicator The LED will turn on to indicate that the file is protected.
In Vehicle Installation 1 1 Remove Side Cover Using the finger nail slot, remove the right hand side cover, under which the SD card slot is located. 2 2 Insert micro SD Card Insert the MicroSD card here, taking care that the gold contacts are facing towards the bottom of the Dash Cam. 3 3 Replace Side Cover Click the side cover back in to place, with the curved edge engaging firstly.
In Vehicle Installation (contd.) 4 4 Remove Camera From Mount Slide the mount towards the camera lens to disengage the mount. 5 5 Remove Cable Lock The cable lock is in the corner of the mount and can be twisted away from the mount itself and then disengaged completely from the mount. 6 6 Connect Power Connect the supplied Car Power cable in to the Mini USB socket marked ‘For use with 90 connector’.
In Vehicle Installation (contd.) 7 7 Refit Cable Lock The cable lock can now be refitted by firstly inserting the tang fully and then rotating the cable lock until it engages fully around the power cable and then clicks in to place in the mount. The cable clamp can be secured to the mount to prevent un-authorised removal, see pages 31 for further details.
In Vehicle Installation (contd.) 10 Route the Cable Through your Vehicle’s Lining Make sure your Dash Cam is mounted securely on the windshield of your vehicle, in the position you use day-to-day. Connect the Rear Window Camera to the Dash Cam using the 6.5 m connecting cable, and run it through your vehicle to the rear window, stowing the cable within the headlining, using the Nextbase™ Cable Tidy Tool (included with your Dash Cam) if necessary.
Connecting your Dash Cam to the Cam Viewer App 1 Plug Cigarette Power Cable in to the Car Power Supply Connect the Cigarette lighter plug to the vehicles 12Vdc or 24Vdc supply. 2 Route the supplied car power cable (as shown) and connect it to the DC-IN socket of the mount. The Dash Cam will automatically power on and start recording once power is available. In some vehicles this will be when connections are made, for others the Dash Cam will power on once the ignition has been turned on.
Connecting your Dash Cam to the Cam Viewer App (contd.) 4 5 3s 4 Turn On Wi-Fi Upon the 380GWX After the Dash Cam has powered on, then press the Wi-Fi button until the button starts to flash Blue in colour, to indicate that the Wi-Fi function is turned on and awaiting a connection. 5 Connect Mobile Phone to the 380GW With the Nextbase Cam Viewer APP working upon the smartphone / tablet, press “Connect to Dash Cam” and then choose the 380GWX Dash Cam.
Installing your Dash Cam - Front 1 2 1 Remove the 3M protective sheet Peel off the red layer to expose the 3M sticky pad beneath. 2 Locate and then check the 380GWX camera position using App Offer the Dash Cam towards the windscreen whilst looking at the Live View on the connected smartphone / tablet. Ensure that the Live View shows the desired image by moving the Dash Cam to the best position possible on the windscreen and adjusting the lens accordingly.